Question 1

Overview of all Mazes 2D Tiles Tutorials

Accepted Answer

Welcome to our Overview Page for all tutorials for Mazes 2D Tiles. Below you find all our tutorials

Getting Started with Mazes 2D Tiles. We recommend you start here, as this tutorial has all the information to get you going with this product.

Something doesn't work right? Troubleshooting Mazes 2D Tiles explains the most common problems you can run into, and how to solve them.

To create more unique puzzles, you can also create your own tiles. We have a separate tutorial with the Naming Conventions and how to make your own tiles. The written tutorial uses Adobe Illustrator, but we also have a video on creating square tiles with MS Powerpoint.

If making 18 separate tiles sounds like a chore, our Tile Multiplier Add-On creates extra tiles based on already existing tiles, and we have a separate tutorial on how to use the Tile Multiplier Add-On. We also have a video on using this Add-On to automatically generate isometric tiles from your square tiles, for your isometric mazes.

Speaking of isometric, we have a separate tutorial about creating isometric mazes with Mazes 2D tiles. This discusses the options and challenges that are unique to making isometric mazes.

For Isometric mazes, separate tilesets are used. Because of that, we have a tutorial on how to create isometric tiles with Adobe Illustrator. If text isn't your thing, we also have a video tutorial on how to create isometric tiles.

And if you want to make your puzzles more unique, consider looking at our tutorial on how to use the mask editor for mazes 2D. We also have a video on making shaped mazes with the masks Add-on.

Question 2

Is there a demo version of BookPublisherTools software available?

Accepted Answer

It is possible to get the demo version for Puzzle Maker Pro here. The demo version includes all puzzle modules, but will create watermarked puzzles.

For other products, please contact our helpdesk to get a temporary license for testing.

Question 3

How to Set Colors and Font Options with Puzzle Maker Pro

Accepted Answer

This tutorial shows how to use the Color Selection options and the Font Options in Puzzle Maker Pro. The Font options are not yet available for every single module at the moment of writing.

Color Selection

In Puzzle Maker Pro you can set the canvas, line and font color for most puzzles using a little rectangle, like the one shown here:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ns1DnajCgp/Color%20Selection%20Options.jpg (Color Selection Options.jpg)

You can set the color in several ways:

Add the color RGB code in either decimal or hexadecimal numbers. This allows you to match the colors exactly to other illustrations or style options
Add or edit the color by setting the HSL numbers (Hue, Saturation, Lightness)
Click the rainbow panel (or the black or the white panel on top of it). Clicking the rainbow panel will change the two panels below it to match the selected color
Click the Saturation panel. This is the middle panel, which shows colors from totally gray (unsaturated) to bright blue (fully saturated)
Click the Lumination panel. This is the bottom panel, and shows colors from white to blue to black
You can also click the "Windows Color Picker" button, this allows you to use the standard Windows Color picker to select or edit colors
Click "Use" to use the selected color.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ulL8O24x8S/Windows%20Color%20Picker.jpg (Windows Color Picker.jpg)

Font Options

In most cases, whenever there's a font to be used in a puzzle, you'll see a font preview panel, that shows the current font, and allows you to select a different font:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/27b9z2HXAq/Font%20Preview%20Panel.jpg (Font Preview Panel.jpg)

Clicking on the white area or on the looking glass button will display the Font Setup window:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/yNvF8ZoU5t/Font%20Setup%20Options.jpg (Font Setup Options.jpg)

This window has several options. (Due to ongoing updates and additions, some options may not be used yet for certain puzzles. Please let me know (with a helpdesk ticket) whenever there's something that you need that doesn't work yet.

Changes will be immediately reflected in the preview panel at the right.

From top to bottom:

Font Selection dropdown menu - you can select a font from the list, or use the built-in font browser to see previews of all the fonts, by clicking the looking glass button
Font Color - set the color for the font, using the Color Selection Dialog
Bold - May set the font type to Bold
Letter Case - This will let the letters unchanged, or force Uppercase or Lowercase use in the puzzle
Relative Font Size - By default the font will be sized proportionally to the squares or shapes in the puzzle, leaving enough margin at the top, bottom and sides. However, you can use this slider to make the font larger or smaller
Move Horizontally / Vertically - Allows you to position the letters in the squares. You may need this when changing from lowercase to uppercase (uppercase letters are all positioned above the font baseline, which may look strange in a puzzle). Also, many free fonts are not scaled or aligned properly, and you can use these settings to correct that

Built-in Font Browser

In most Puzzle Maker Pro modules (except the oldest ones), you can also use the built-in Font Browser to preview and select a font.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/AFYO3NRioX/Built-in%20Font%20Browser.jpg (Built-in Font Browser.jpg)

Here you can see a number of fonts at once. You can:

Use the Search field to type a part of a font name
Use the font list at the left, and the scroll bar, to quickly move around in the list of fonts
Use the grid Size options at the lower left to change how many fonts are shown in the grid at the right
Use the little looking glass icon for each font to open a larger zoomable preview of the font
Use the little check mark for a font to select and use that font

Note: The Font Browser is also available as a separate purchase, which doesn't require Puzzle Maker Pro

Question 4

Create Shaped Mazes for Mazes 2D Tiles (Video)

Accepted Answer

With the Masks-Add-On for Puzzle Maker Pro – Mazes 2D Tiles you can use your own images to create a mask (a.k.a. shape) and use the manual editor to adjust the shape. The video demonstrates how this is done. If you prefer to read, there’s also this Tutorial: Create Shaped Mazes.

You can find more tutorials on the Mazes 2D Tiles tutorials page. Video tutorials can be found in the Mazes 2D Tiles Playlist.

Question 5

How to create patterns from your photos and images with POD Graphics Maker

Accepted Answer

This Youtube tutorial demonstrates POD Graphics Maker Pattern 03-4, using a photo to create a seamless pattern.

Question 6

How to create a 'Draw' style pattern with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Draw style patterns with POD Graphics Maker.

Pattern 02-2 - Draw is part of POD Graphics Maker XL Edition and Expansion Pack 02.

Question 7

Using the add-ons for Zig Zag Word Search

Accepted Answer

Welcome to the tutorial for the add-ons for Zig-Zag Word Search.

There are two add-ons available for this software.

Let's look over what these two have to offer.

Extras Add-on

Diagonals look interesting, and can create a lot of new effects.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Ms3phl3AIY/Zigzag%20word%20search%20diagonals.jpg (Zigzag word search diagonals)

The little crosses, as the diagonals go over each other, are a nice added difficulty and look really good in the solution too.

You can also use this option with the Word Snake option.

Word Snake

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1721Phn4Ed/ZigZag%20Word%20search%20snake.jpg (ZigZag Word search snake)

Word snake is a variation on the normal zig zag word search puzzles. Usually, the words can go anywhere they want, and in whatever form they want. In word snake, they will go into a single long line. This is represented in the solution by using a continuous line for the words, and the little dotted lines in between the words. You can see that the next word will always start next to, or diagonal to, the ending of the last word. This isn't a singular looping line, so there are two words that have a beginning and an end without anything connecting to them. See if you can find those the start and end point!

Random Shapes

This is by far the most interesting and unique variation on the zig zag word search puzzles. Usually, you'd only work within a grid, where each letter is directly next to its neighbours. Not in this variation. Here, the letters are placed more or less randomly on the screen.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Xz5G2lP2no/zigzag%20random%20shapes.jpg (zigzag random shapes)

So how does this work? Well, if you go to style, and add a bit of "line width", you can see the boxes that the letters are contained in, and what boxes are neighbours.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/DEUgMzokYJ/Zigzag%20voronoi.jpg (Zigzag voronoi)

This is called a Voronoi Diagram. You can look up how this works if you want to, but the more interesting part is how this works. No longer are there three (or eight, if you use diagonals) possible routes from each letter, now it can be any random number. It adds a layer of difficulty, while looking very different from the puzzles you get with other word search options.

How to use the Styling options for Puzzle Maker Pro - Mazes 2D

This tutorial applies to:

There are five different sections for styling, which are combined on 3 tabs, that can be found on the Style tab

Passage / Door Styling (Line Style tab)
Wall / Border Styling (Line Style tab)
Colors (Colors tab)
Solution Path Styling (Colors tab)
Start/End Settings (Start/End tab)

Line Style tab

Passages / Doors

The Passage / Doors settings control how large the openings between the different squares, circles or other shapes are. The maximum is 100% (completely open).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/8A1ihjmN47/Mazes%202D%20-%20Styling%20-%20Passage.png (Mazes 2D - Styling - Passage)

As you can see in the screenshot, changing the passages setting will create a different 'atmosphere' for the maze.

In addition to the Passage Width setting, you can also randomize the Passage Width and/or the Passage Position, resulting in a more chaotic looking maze:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Sh92ULE9XL/Mazes%202D%20-%20Styling%20-%20Passage%20Random.png (Mazes 2D - Styling - Passage Random)

Note: This setting is not used for the Small Circles mazes.

Borders / Walls

The Borders / Walls settings control the width (weight) of the lines between te squares, octagons or other shapes. The current maximum is 20% (of the square width).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/K7PzfLysWo/Mazes%202D%20-%20Styling%20-%20Walls.png (Mazes 2D - Styling - Walls)

As you can see in the screenshot, this setting makes the walls much more pronounced.

Additionally you can randomize the wall thickness (or width / weight). This will determine a different line width for each cell (square, octagon, circle, etc) and draw all lines around the shape with that line width, resulting in a more hand-drawn, stylish look.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XgCnQZEk0C/Mazes%202D%20-%20Styling%20-%20Walls%20Random.png (Mazes 2D - Styling - Walls Random)

Colors tab

There are five different places to set the colors for Mazes 2D:

The (Wall) Line color (Line Style tab)
The Font color for Start and End symbols (Start/End tab)
The Canvas and Cell 'Floor' color (see below)
The Solution line color (see below)

Canvas / Background Colors

The canvas and 'Floors' colors are two ways to fill the background of an image with color. The canvas is shown everywhere where there is no cell (square or other shape), the Floor color is shown for every cell.

The example below shows an extreme coloring scheme:

In this example we chose the Easy Octagons shape to illustrate the use of colors. All the purple areas are not covered by octagons, the yellow areas are octagons.

For square or oblique mazes, the canvas color will be shown when you use a mask to define the maze contours, otherwise it will not be visible.

Solution Line Style

You can customize the look and feel of the solution path (which will only be shown in the maze solutions!):

You can set the color (for puzzle books printed in grayscale you can select a contrasting gray color)
You can set the width (weight / thickness) of the path, this is a percentage of the cell width
You can choose a dashed path
You can choose a curved path (which often looks better for non-square shapes)

Below you can see two examples with the dashed and the curved path.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/5ohsZv5pa6/Mazes%202D%20-%20Styling%20-%20Solution%20Dashed.png (Mazes 2D - Styling - Solution Dashed)

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/AwBt1nYFRm/Mazes%202D%20-%20Styling%20-%20Solution%20Curved.png (Mazes 2D - Styling - Solution Curved)

Start/End tab

There are several options to customize the Start and End points in Mazes 2D:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/8JR1teg1iE/Mazes%202D%20Squares%20-%20StartEnd%20Options.png (Mazes 2D Squares - StartEnd Options)

You can choose to let the outside passage / wall open. This is shown in the green circle, where the left and top edges of the square are left blank
You can set the font and font color for the Start and End letters - just click the font preview panel that says Arial to change the font and other settings
You can change the letters to be used
You can use images instead of letters.

Using images for Start and End

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JvF1MxnEjt/Mazes%202D%20Squares%20-%20Start%20End%20Images.png (Mazes 2D Squares - Start End Images)

To use images for Start and End, you can drag and drop images on the two white panels (the Start/End Image Settings), or click the panels and select an image).

Puzzles and Solutions

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/HQSKL5ABpv/Easy%20Puzzle%20Books%20-%20004%20Select%20Puzzles%20-%20Blank.jpg (Easy Puzzle Books - 004 Select Puzzles - Blank.jpg)

The screenshot shows the empty Puzzle Files window. This is what it will usually look like when you start, unless you have used a preset already.

You can click "Add Puzzles" to add puzzles, and "Add Solutions" to add solutions. Pretty easy, right?

The puzzles and solutions will be displayed in the list. Especially for the first few puzzle books, it makes sense to verify that the proper puzzles and solutions are matched.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/TozOU08WIX/Easy%20Puzzle%20Books%20-%20005%20Select%20Puzzles%20-%20Details.jpg (Easy Puzzle Books - 005 Select Puzzles - Details.jpg)

In this screenshot you can see that a number of puzzles and solutions have been selected. Each line contains < P>: showing the puzzle file name, and < S>: showing the solution file name. When you click on each line, a message box will show you the full path for the puzzle and solution.

Note: When you use presets, you'll get a warning "File Not Found", if your list of puzzle files contains files that cannot be found. For example when you've deleted the files or moved them to a different location.

For Automatic book creation, you can skip the next two paragraphs.

Titles

Select the "Titles" tab to see more information:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/nA1gAdP70G/Easy%20Puzzle%20Books%20-%20006%20Select%20Puzzles%20-%20Title%20Auto.jpg (Easy Puzzle Books - 006 Select Puzzles - Title Auto.jpg)

You can edit the Puzzle Title, Solution Title and Number Symbol here. For Automatic book creation, these settings will be identical to the settings in Step 4. For Manual book creation, this is where you should edit the settings.

In the screenshot, the lower part of the window is greyed out. This is what it looks like when you open this window from the "Auto" tab.

Placeholders for Manual Grid Creation

Please read the Manual Puzzle Books tutorial first, otherwise these settings will not make sense.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/uTw4dNJq3i/Easy%20Puzzle%20Books%20-%20007%20Select%20Puzzles%20-%20Titles%20Manual.jpg (Easy Puzzle Books - 007 Select Puzzles - Titles Manual.jpg)

For Manual Puzzle Books creation, you'll first create one or more Powerpoint slides with placeholders for the puzzles, puzzle titles, solutions and solution titles.

This will allow you to create a nice layout, changing positions, sizes, fonts, colors, etc. In the grid, you'll see (or use) names like {Puzzle Title 1}, {Solution 3}, and so on.

These codes - "Placeholders" - are needed to tell the plugin which titles and puzzles belong together. Once the copy and replace process begins, it will replace {Puzzle Title 1} with "Puzzle ##", and replace "##" with the current puzzle number.

For Easy Puzzle Books, it's not really important what these names are, as long as they not identical, and there's a number included. Therefore it's best not to change the settings.

For Mixed Puzzle Books Pro, these placeholders should be unique, to separate the different puzzle sets in your puzzle book.