Question 1

How to create Reverse Word Search puzzles?

Accepted Answer

This tutorial shows how to create Reverse Word Search puzzles with Puzzle Maker Pro - Reverse Word Search.

This tutorial is for:

Puzzle Maker Pro - Reverse Word Search

What is Reverse Word Search

Reverse Word Search is a puzzle where a list of words must be placed in an almost empty grid, instead of Standard Word Search where you have to find words that are already placed in the grid.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/AvNQwkSm0O/0-20240925072051786-1-W-P.png (0-20240925072051786-1-W-P)

In this example you can see that some words are already placed in the grid. For each unplaced word, one or more letters will be shown. With each puzzle you also get the complete list of words for that puzzle, in this case:

Astonishing, Blessing, Compelling, Delight, Discovery, Dream, Energetic, Enrich, Exclusive, Ferocious, Hero, Life-Changing, Now, Overwhelm, Passion, Pleasure, Power, Quality, Renewal, Results, Sensational, Service, Sexy, Soul, Thriving, Transforming, Unlimited, Whole.

If you already know Puzzle Maker Pro - Standard Word Search, or Zig Zag Word Search, the options and features of this module will be familiar to you.

Set up the Word List

Every word puzzle starts with your word list. You can either type / copy the words, or select a txt file with the words. Each word should be on a separate line.

The screenshot shows that a word list file was selected, and also shows a preview of a puzzle and solution that were generated from the word list:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/yzP6rYhoLb/Reverse%20Word%20Search%20-%20Overview%201.png (Reverse Word Search - Overview 1)

Reverse Word Search Complexity

The complexity / difficulty of Reverse Word Search depends on several settings, such as:

The words in your word list
The size of the grid
The number of clues in the grid
The number of words that are already shown

The number of clues and the number of words can be set on the Advanced tab:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ntp6Scjq9B/Reverse%20Word%20Search%20-%20Overview%202%20Clues.png (Reverse Word Search - Overview 2 Clues)

There are five settings for the number of Clues:

Very Easy (1 clue for each 3 letters) - a 9 letter word will show 3 letters
Easy (1 clue for each 5 letters) - a 9 letter word will show 2 letters
Normal (1 clue for each 6 letters) - a 12 letter word will show 2 letters
Hard (1 clue for each word)
Very Hard (1 clue for each two words)

The letters will be selected randomly. Because of overlapping words, it's possible that more than the number of clues are shown for a specific word.

It's best to play with these options after setting the grid size and the word list, to determine which number of clues works best.

Puzzles for Kids

There are several features that allow you to create puzzles specifically for kids. Of course it starts with selecting a suitable word list and grid size. Additionally there are options for:

Limiting the number of diagonals
Switch off Reversed words
Kids Diagonal: An option to enforce that diagonal words are always printed from top left to bottom right.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/hmq0ZGymUO/Reverse%20Word%20Search%20-%2002%20Kids%20Diagonals.png (Reverse Word Search - 02 Kids Diagonals)

(The word list in this example is obviously not a great fit for younger kids, it's just used to demonstrate the Kid's Diagonal feature).

Solution Options

In contrast to Standard Word Search there are no options to set the 'noise' letters to fill the grid, since empty square will be shown as black squares. (Otherwise the puzzle would be unsolvable).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Jzq4h7531k/Reverse%20Word%20Search%20-%2005%20Solution%20Style.png (Reverse Word Search - 05 Solution Style)

You can set the style of the lines that indicate the words in the solution, along with the line color and thickness.

Puzzle Styling Options

You can customize the styling of the puzzle by selecting your own font (and font color) and setting the colors for the lines and squares. For Reverse Word Search Puzzles it's necessary to print the lines in the grid, otherwise it will become really hard to solve.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/6EG56rtVfv/Reverse%20Word%20Search%20-%2006%20Style.png (Reverse Word Search - 06 Style)

You can change the font by clicking on the white panel that shows the font name (it also shows the text "Click to Edit Font Settings").

Word List Styling Options

Additionally there are some options to control the way the word list is displayed in Instant Puzzle Books.

If your word list has hints / descriptions in addition to the words, you can choose to display those. That adds a significant bit of complexity. This feature can also be used to create language translation puzzles. (instead of just typing a word on each line, type the word and description, separated by a colon, like this "word:description")
Words can be aligned left, center or right.
Words can be sorted in several ways

Here's an example of a Reverse Word Search page in an Instant Puzzle Book (this example uses the Time Saver features):

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1ddRcvonnD/Reverse%20Word%20Search%20-%2007%20Output%202%20Per%20Page.png (Reverse Word Search - 07 Output 2 Per Page)

Word Lists in Columns

Each column (in Excel) has a title for the word list, and a list of words below it, for example:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/EzwY8uF3gZ/CSV%20Example%201.png (CSV Example 1)

In Excel, Export to CSV by selecting File -> Save As, and then select CSV (comma delimited). In Puzzle Maker Pro select Tools -> "CSV Splitter (Columns to Files)" and select the file you want to split.

After processing, Puzzle Maker Pro will automatically open the folder with the newly generated txt files, that are ready for use in the Word puzzle or Word Search modules in Puzzle Maker Pro.

Word Lists in Rows

Each Row (in Excel) has a title for the word list, and a list of words to its right, for example:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/NXk24jyjH1/CSV%20Example%202.png (CSV Example 1)

In Excel, Export to CSV by selecting File -> Save As, and then select CSV (comma delimited). In Puzzle Maker Pro select Tools -> "CSV Splitter (Rows to Files)" and select the file you want to split.

After processing, Puzzle Maker Pro will automatically open the folder with the newly generated txt files, that are ready for use in the Word puzzle or Word Search modules in Puzzle Maker Pro.

Question 3

What are Presets in Puzzle Maker Pro

Accepted Answer

There are many ways to fit Puzzle Maker Pro in your workflow. To help you to keep your layouts and styling consistent, we introduced 'Presets' in one of the earliest version.

What is a Preset

A Preset is basically the list of all the settings you can use for a puzzle. What is saved in a preset for Sudoku is different than for Word Search. In general, all the settings and options that are shown on the Puzzle Settings tab are part of it.

Time Saver Presets

In the Time Saver tab you can also find presets. These contain all the settings on the Time Saver tab (and sub-tabs) for that puzzle type. For example, for Sudoku, it will contain the entire table of sudoku variations and quantities. For Word Search it will include the word list and the table of puzzle sizes, along with the Main settings.

It is not required to use presets at all, but in some cases it can make your workflow more efficient.

Presets and Word Puzzles

A specific use case is when you generate word puzzles, such as Word Search: The word list you select for Word Search is part of the preset. When you 'load' that preset, you should see the same word list or word list file displayed.

When you use the Time Saver for Word Search, you can use select these (word search puzzle) presets to generate a puzzle book, and choose the option to use the word list that's included in that preset.

Please note: Puzzle Maker Pro supports different workflows. You don't have to use the presets, it's an option that may work for you.

Alternatively you can use a single preset for consistent styling of your puzzles, and use the Time Saver to override the word list.

Question 4

How to use the Time Saver for Word Search (v2023.3.3 and newer)

Accepted Answer

This tutorial shows how to use the Time Saver for Word Search (v2023.3.3 and newer)

The tutorial applies to (both are required):

Introduction

With Puzzle Maker Pro version v2023.3.3, the Time Saver for Word Search has undergone significant changes. It now lets you combine multiple puzzle types in one single table (more about that later). This allows you to completely set up your puzzle book to look the way you want.

Using this Time Saver consists of 3 steps, before you click the "Create" button:

Set up the 'global' options for the puzzles and puzzle book,
Select the Word Lists you want to use in your puzzle book,
Configure the puzzles you want to generate and include in your puzzle book.

A good way of learning to use this version of the Time Saver is to play around with the word lists and puzzle configuration first. You can easily create 'test' puzzle books in Powerpoint or PDF format, to see the results of certain options, and delete these files when you're done.

Set up the Global Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/DoHTuPZd9K/Word%20Search%20TS2%20-%20Main%20Options%20Merge.png (Word Search TS2 - Main Options Merge (1).png)

First of all, you'll have to click the "Use Time Saver" checkbox at the top of the page to activate the Time Saver. The text for the "Create" button at the bottom will change into "Create (TS)".

Word List Use Options

The "Word List Use" options will override the similar options for the Word Search Puzzle Settings tab.

When you create several puzzles (for example, when you set quantity to 10), you can specify that words will only be used once (1). This means that you get a set of puzzles that don't use the same words. However, processing may stop when all words have been used.
Minimum Words for Final Puzzle will make sure there are enough words in the last puzzle, or it will stop generating puzzles. For example, if you have a list of 100 words, and the first two puzzles together use 85 words, you will not get a third puzzle, because there are only 15 words left for the puzzle.
"Stop when all words have been used" - In the previous example, you can order Time Saver to stop, so you get only 2 puzzles, or you can uncheck this options. In that case it will reset the word list and start over, with all words available for the next puzzle.
"Merge All Word Lists" (2) - If you specify more than 1 word list on the "Word Lists" tab, you may want to merge them into one large word list for all your puzzle. This allows you, for example, to use a Christmas themed word list, and a general word list together, so each puzzle will have some themed words and some words from the general list.

Layout Options

Word List Font Size
- With the default 'Variable Font Size' you may get a different font size for the different word lists, depending on the length of the words and the number of words. It's a matter of style choice whether you like this.
- You can also set it to "One Size Fits All". That will analyze all the word lists to find the largest font size that allows all the word lists to be printed in the available space.
- With "Fixed Font Size" you can explicitly specify the font size. With this option it makes sense to generate a test version of your book and check this manually: If you set the Font Size too large, some words may not be printed due to the available space the word lists.
Alignment - you can set the alignment of the puzzles in the available space. For example if you have one puzzle per page, with a trim size of 8.5" and 0.5" margins, that would leave 7.5" for the puzzle. Usually the height will then only be 4 or 5" (since the title and word list require some space as well), a square puzzle would be printed at a 5x5" size. You can set whether it should be aligned left, center or right. Additionally, you can 'force' Puzzle Maker Pro to align the word lists with the puzzle, to make the page look more compact.
In some cases, for example religious puzzle books, you may want to add a "Filtered Words" List. This is a list of words that should not appear in the puzzle by accident. (Please note: this will NOT filter words from the regular words list. If you use the word "homeowner" in a word list, and the word "meow" is in your filtered word list, the word "homeowner" can still appear in the puzzle!

Separate Word Lists

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/btqPiaMLWf/Word%20Search%20TS2%20-%20Main%20Options%20No%20Merge.png (Word Search TS2 - Main Options No Merge)

You can also choose to keep all word lists separate. In that case you can even use the word list file name as a title for the puzzle.

For example, if you have a word list "dinosaurs.txt", it can use the word "dinosaurs" as a title. When it results in several puzzles (e.g. quantity is set to 2 or higher), the puzzles will be numbered dinosaurs 1 and dinosaurs 2.

You can set up your own title format:

"Puzzle" is printed as is. You can type a different word here, or leave it out. For example for other languages you can change this.
"#" is the puzzle number. All puzzles in your book are numbered, unless you click "Don't Number the Puzzles".
%TITLE% is a placeholder that will be replaced with the name of the word file. The way this is set up in the screenshot could result in a puzzle title like "Puzzle 113 dinosaurs".

Select the Word Lists

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/KGUmdNLMBr/Word%20Search%20TS2%20-%20Word%20Lists.png (Word Search TS2 - Word Lists)

On the next tab you can select your word lists. Each file should be a plain text file with ONLY the words you want to use, each word on a separate line. Each line will be considered a separate word for the puzzles.

An example:

Configure the Puzzles

To specify which puzzles you want to generate and print in your puzzle book, go to the "Batch Creation" tab. Please don't let the numbers and arrows in the screenshot below overwhelm you.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Sy9kpXa2K9/Word%20Search%20TS2%20-%20Batch%20Creation.png (Word Search TS2 - Batch Creation)

What you see here is a table that contains a row for each puzzle configuration that you want to create. Regular puzzles with just the number of rows and columns, Preset puzzles from your own Word Search presets, and Mask puzzles, from your own saved masks.

At the top left, you can set the Default Quantity (1) for each row you add. By default it's set to 1. You can also edit the configuration for each row later on, just by clicking on the cell you want to change.

You can move rows up and down by selecting a single row and clicking the "Row Up" or "Row Down" buttons.

You can delete rows from the table by selecting one or more rows and clicking the "Delete Selected" button, or clicking the "Delete All" button. Deleting rows from this table will NOT delete presets or saved masks.

Adding Regular Word Search Puzzles (2)

The easiest way to add puzzles, which was called 'Fast' in the older Time Saver, is by setting the number of rows and columns. In box (2) you can see that both the Rows and Columns are set to 20. When you click the button "Add", it will add a row to the table:

Type: R (Regular), this identifies the type of puzzle for that row
(File) Name "Rectangle". This has no further meaning for Regular puzzles
Word List "Default". See "Word List Setup for Specific Puzzles" below for details.
Rows / Cols: The number of rows and columns for the word search puzzle
Quantity: The number of puzzles to generate
Number of Words: The number of words for the puzzle. A value of 0 (zero) means unlimited, as many as can be fit in
Diag: Allow Diagonals for the puzzle
Rev: Allow Reversed (Backwards printed) words for the puzzle
BG: Not relevant for Regular puzzles

Adding Word Search Puzzle Presets (3)

To use your existing Word Search Puzzle Presets to the list, click "Add Presets". This will open a window where you can select all the presets you want to add. The information in the table that's specific for Preset rows:

Type: "P" for Preset
(File) Name: The name of the preset
Word List: See "Word List Setup for Specific Puzzles" below for details.

Adding Word Search Saved Masks (4)

To use your existing Saved Masks to create puzzles, click "Add Masks". This will open a window where you can select all the masks you want to add. These are mask that are saved from the Mask Editor that's shown when you click "set Mask" in the Puzzle Settings tab for Word Search puzzles. The information in the table that's specific for Mask rows:

Type: "M" for Mask
(File) Name: The name of the saved masks file
BG: Print the mask silhouette as a background for the puzzle. You can switch this on and off for each row of type Mask. Additionally, since you probably want to have a consistent approach to printing mask, you can set the default value for this option in box (4): Print Mask as Background

Word list Setup for Specific Puzzles

The "Word List" column in the table gets the value "Default" for each new row. There are some other options.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/KqsfjZax9w/Word%20Search%20TS2%20-%20Word%20List%20in%20Row.png (Word Search TS2 - Word List in Row)

To change the Word List value for any of the rows in the table, click the down arrow (the 'v' next to Default) to get a list of options.

Default: This will use the default word list setup as defined on the "Main" tab. For each row the word lists will be reinitialized
- Merge All Word Lists: For each row in this table, whether the quantity is 1 or more, the 'merged' word list is initialized and used. That means that the same word can be used for puzzles from several rows. (The option "Use Words Only Once" applies only to the quantity of puzzles for a single row)
- Separate Puzzles Per Word List: For each row in the table, the next word list will be used. For example, the first row with "Default" will use word list 1, the second will use word list 2, etc. When there are no more word lists, it will start back at word list 1.
Word List From Preset: This will work only for rows with the "Preset" type! It will use the word list that was saved with the puzzle preset. This can be a pasted list of words, or a word list file. (If you use this setting for the other rows in the table, it will revert to "Default" when processing the table
A specific Word List file: You can also select any of the word list files that you added to the "Word Lists" tab. You'll need to set up all the word lists you want to use on the "Word Lists" tab, because Puzzle Maker Pro won't know in which folders you store all your word lists. When you select a specific file, such as "Car Brands.txt" in the screenshot, only that file will be used for the puzzle.

Tips and Tricks

The previous version of the Time Saver would 'multiply' the number of word lists with the quantities set in the table. This (new) version will generate exactly the quantities that are set in the table, unless your word lists do not contain enough words.
Setting up Masks or Word Search Presets is a time investment that will pay off. You can choose to either set up a Word Search Preset with a Mask and a Word List, or to just create the Mask and Word List and combine them in the table in the Time Saver. The result will be identical
If you have a Preset with a mask, and you change the number of rows and columns in the table, the mask will not be used. Example: If you have a mask of a cat that has 23 rows and 17 columns, and you change the numbers to 25 rows and 20 columns, the mask will not fit with those dimensions and will not be used
You'll need to add ALL the word lists you want to use, on the "Word Lists" tab. These will be added automatically to the drop down menu for the Word List column
You can add a list of Presets and then add a list of Masks, and use the Row Up / Row Down button to mix them up, if needed. You can also maximize the Puzzle Maker Pro window on your computer to see more of the table.

Introduction

The Time Saver for Word Search has several options to specify the puzzles for your book:

"Fast" - Specify the dimensions and quantity for the word search puzzles
"Presets" - Specify your own existing presets to create word search puzzles
"Masks" - Specify which mask presets to use for your word search puzzles (to be released soon)

This tutorial describes the process to use "Presets" for your puzzle book. There are three steps to do this, in addition to the regular steps to create puzzles and puzzle books:

Create the Mask
Save the puzzle Preset
Select the Preset in the Time Saver

Creating a Mask for Word Search

To create a shaped puzzle using masks, first go to Standard Word Search. Then find the "Use Mask" tab and click "Set Mask".

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/IsdlTUAINb/Masks%20TS%20-%20Word%20Search%20Set%20Mask.png (Masks TS - Word Search Set Mask)

This will open the Mask Editor. Here you can create a mask from scratch, or import an image (JPG or PNG) to define the mask.

Create a Mask from an existing image

The screenshot below shows the Mask Editor for Word Search.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/lpB1FP8xTk/Masks%20TS%20-%20Mask%20Editor.png (Masks TS - Mask Editor)

There are several things you can do here:

Set the number of columns for the grid. (To keep the correct proportions for the mask, the number of rows is calculated automatically, based on the image you use)
Select an image - Click "Select File" to select a JPG or PNG image. As soon as it's selected, the grid will show the puzzle shape. Please be aware that a mask will usually remove many cells (spaces) from the grid. If you'd normally use a 10x10 grid with 100 letters, you may need to increase the size to 18x18 when you use a mask, to still have 100 letters in the grid. (You can change the number of Columns after the image is selected).
To make the mask available for further use or editing, click "Save Preset". If you don't save it, it can still be used for the word search puzzle, but you won't be able to reuse it. It's best to choose a name that reflect the image and size, e.g. "Spaniel 25" in our case.
Finally click "Use Mask" to go back to Word Search and apply the mask.

You can also edit the mask - just click the individual cells to switch them on and off.

Creating the Word Search Preset

Back in the Word Search settings, you'll immediately see a preview of a word searhc puzzle with the mask applied.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/o0NOJ8fYP2/Masks%20TS%20-%20Word%20Search%20With%20Mask.png (Masks TS - Word Search With Mask)

You can use the background image (silhouette) as a background image.
Save the Word Search puzzle WITH the mask as a preset. You can use any name, but again it makes sense to use the theme and the size. That way you can easily select the preset whenever you need it. Just type a name and click one of the 'disk' buttons.

Adding the Preset in Time Saver for Word Search

In the Time Saver for Word Search, you can first set up the Main options and the Word Lists. In this tutorial we'll explain the Batch Creation / Presets option.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ZvRzwFi0Vh/Masks%20TS%20-%20Selecting%20Presets.png (Masks TS - Selecting Presets)

This should show you a list of your Standard Word Search presets.

Tips and Tricks

In this tutorial we've used two different presets:

Mask Presets - these are saved in a separate folder at 'my documents'/Puzzle Maker Pro/Mask Presets/ . Here you can manually copy or delete presets if needed.
Standard Word Search presets - these are saved in a different folder: 'my documents'/BookPublisherTools/Presets/PMP. In this folder you can find subfolders for each puzzle type.

A quick way to open Windows File Explorer to the general presets folder is to go to the Tools tab and click "Open Preset Folder".

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/K62AtznBzM/Find%20the%20Preset%20Folder.png (Find the Preset Folder)

Introduction

Full page word search puzzles are printed on a spread consisting of 2 pages. The puzzle itself is printed on one page, the word list is printed on the second page. In Puzzle Maker Pro it's easy to generate the puzzles, but it takes a little bit of math to get it right. An example of the pages in Powerpoint could look like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ZctWy8np1D/Full%20Page%20Example.png (Full Page Example)

First we'll explain a bit of background, next we'll show you how to do it in Puzzle Maker Pro in several steps.

Page and Puzzle Dimensions

The entire layout depends on your page setup, the trim size and margins. The puzzle dimensions should be adjusted to this. Or the other way around, if you want a certain size for the puzzle, say 30x40 or 34x44, you may want to adjust the page settings accordingly.

As you can see on the previous image, the puzzle page consists of several parts:

The title
The puzzle itself
The margins

Optionally you may want to add a page number as well.

Trim Size and Margins

There are several trim sizes that are commonly used for KDP books. For printables, you may use slightly different dimensions, corresponding to common paper sizes (Letter Size in the USA, A4 in Europe).

Let's say you want to use margins of 0.5" on each side. (This is not a requirement for Puzzle Maker Pro). This will have an impact on the printable area for each trim size:

A trim size of 6x9" will have a printable area of 5x8"
A trim size of 8x10" will have a printable area of 7x9"
A trim size of 8.5x11" will have a printable area of 7.5x10"

The horizontal:vertical ratio is important, because it determines how many letters you can use horizontally and vertically. It gets slightly more complex if we add a title, but luckily you only need to do the math once.

Adding room for the title.

In Puzzle Maker Pro, the space for the title is allocated as a percentage of the total height for each puzzle. In this tutorial we have just one puzzle per page. Let's say we set the title percentage to 5%, that means:

A trim size of 6x9", printable area 5x8", title area is 5% * 8" = 0.4". The puzzle area will be 5x7.6"
A trim size of 8x10", printable area 7x9", title area is 5% * 9" = 0.45". The puzzle area will be 7x8.55"
A trim size of 8.5x11", printable area 7.5x10", title area is 5% * 10" = 0.5". The puzzle area will be 7.5x9.5"

As you can see, the sizes are different, and more importantly, the ratio between horizontal and vertical is different. This means that the number of letters horizontally and vertically will be different:

5x7.6" has a horizontal:vertical ratio of 1:1.52, which means 1.52 letters vertically for each letter horizontally
7x8.55" has a horizontal:vertical ratio of 1:22, which means 1.22 letters vertically for each letter horizontally
7.5x9.5" has a horizontal:vertical ratio of 1:27, which means 1.27 letters vertically for each letter horizontally

For the larger trim size 8x10", the 1:1.22 ratio means a hor/vert ratio of 30x37 or 33x40 letters.

If you change the margins, you'll get slightly different calculations.

Using a fixed grid size

On the other hand, if you want to use a fixed grid size, say 30x40 or 34x44, you can also do that. Puzzle Maker Pro will resize the puzzle (image) to fit into the space that's reserved for the puzzle. This may result in a tiny bit of additional white space next to the puzzle.

Page Setup in Puzzle Maker Pro

You'll need to set up the Trim Size, the Page Layout, and the Titles.

Trim Size and Margins

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/IHUyJmo9Gy/full%20page%20word%20search%20trim%20size.png (full page word search trim size)

You can set the Trim size on the Instant Puzzle Books -> Page Format tab.

Set the Trim Size, and optionally select Bleed. (Bleed will affect the printable area, Puzzle Maker Pro will take this into account)
Set the Margins. Optionally you can use different margins for left and right pages. In that case:
Click "Mirror Margins", and you'll also want to make sure "First is Right Page" is not enabled. This will ensure that each full page word search puzzle and its word are printed on facing pages. You'll have to add a first page later on, since KDP requires that the first page is always a 'right' page.

Page Layout

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/5d1Y0Gf0ce/full%20page%20word%20search%20Page%20Layout.png (full page word search Page Layout (1).png)

You can set the Full Page layout on the Instant Puzzle Books -> Page Layout -> Word Search Layouts tab. (This is only available with the Time Saver Add-On for Word Search).

First, make sure to click Collate Setting "B". This will print all the puzzles first, and the solutions at the end of the book. (The solution layout can be set on the tab "General Layouts").
Layout types 7 and 8 are used for full page word search puzzles
You can set the number of word columns to 3 or 4.

Titles Setup

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/43xHIOxl1Y/full%20page%20word%20search%20titles%20setup.png (full page word search titles setup)

You can set the titles setup on the Instant Puzzle Books -> Titles Setup tab in the Title Layout Settings area.

Set the "Puzzle Title Height" to the number you used in your calculations. 5-10% is enough to have a clearly printed title. The font size for the title will automatically be adjusted for the space you set.
The solution title height is usually not important, but you can set this as well.
If you want, you can change the font for the titles. This font does not apply to the word list.

Puzzle Setup in Puzzle Maker Pro

The previous steps were more or less the boring part. Important, but you still have nothing to show for it.

The options for Word Search are explained in other tutorials. For full page word search puzzles, you'll need to set the grid size, and have a large enough word list.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/g17ILUuRSc/full%20page%20word%20search%20preview.png (full page word search preview)

In this example we've set the grid size to 40 rows and 32 columns.

As with all modules in Puzzle Maker Pro, you can use the mouse scroll wheel on the Preview panel to zoom in (or out) and see more details of the puzzle.

Don't forget to set the right settings on the Advanced tab, such as spaces.

Creating the Puzzle Book - Time Saver

There are several techniques to create the entire puzzle book: Obviously there is the Time Saver, and some people prefer to create the puzzles manually, one by one, and then assemble them into a puzzle book using a separate module of Puzzle Maker Pro.

When you use the Time Saver, you have some additional options for the puzzle titles, and the whole process is faster. However, you'll have less control over the individual puzzles.

Make sure to click the "Use Time Saver to generate Puzzles" to make sure the Time Saver is used. When this is enabled, the "Create" button will change into "Create (TS)".

Time Saver - Main

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ZEoat0GPdZ/full%20page%20word%20search%20ts%201%20main.png (full page word search ts 1 main)

On the "Main" tab you can set some preferences:

Merge All Word Lists - this will merge all your separate word list into one huge set of words. Use this if you have many themed word lists and want to mix them all up for the word search puzzles
Separate Puzzles Per Word List - this will create puzzles for each word list. This will also allow you to use the titles of the word list files as puzzle titles.

Time Saver - Word List

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/paLkfJB3Sr/full%20page%20word%20search%20ts%202%20word%20lists.png (full page word search ts 2 word lists)

Select all your word files on the "Word Lists" tab. Each word list file should contain just the words, one on each line. No headings, no additional information. Just the words in plain text. Just be careful when you copy word lists from the internet, you may by accident copy additional characters that cannot be processed by Puzzle Maker Pro.

Time Saver - Puzzle Setup

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/IiDRaEaPMF/full%20page%20word%20search%20ts%203%20puzzle%20formats.png (full page word search ts 3 puzzle formats)

Finally the Puzzle Setup. Use the dimensions you calculated at the start of this tutorial (or the ones you just want to use). Optionally select the other options in each row. Just click on the cell (e.g. where it says 40 or 32 or 20 in the screenshot) to edit the number or switch an option on or off.

When you click "Create (TS)", Puzzle Maker Pro will generate puzzles and a puzzle book. (Don't forget to select Powerpoint and/or PDF on the Instant Puzzle Books -> Output Type tab).

The way Puzzle Maker Pro handles these settings:

For each word list, it will process the table with puzzle formats, and generate the quantity of puzzles you've set here.

If you have 10 word lists, and just one puzzle format with quantity 10, you'll get 100 puzzles
If you used "Merge All Word Lists", it counts as 1 single (large) word list. In that case you would get just 10 puzzles.

Creating the Puzzle Book - Manually

Another option to create a Word Search puzzle book (or any other type of puzzle) is to manually create puzzles that appeal to you visually. Puzzle Maker Pro will create a completely randomized new puzzle each time you click "Next Preview".

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/sNPJzh5r1x/full%20page%20word%20search%20-%20manual%201.png (full page word search - manual 1)

Click "Next Preview" to generate a new puzzle
Optionally switch between Puzzle and Solution Preview, by clicking the "Preview Solution" option
Click "Save Preview", this will save the puzzle files in the project folder, exactly the same way it would be saved when you click "Create".

The next step would be to create the puzzle book from all the saved puzzles:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/IeL7BFWvau/full%20page%20word%20search%20manual%202.png (full page word search manual 2)

On the "Output Settings" tab you can find an option "Skip Puzzle Creation". When you switch this option on, and click "Create" (or "Create (TS)"), Puzzle Maker Pro will not generate new puzzles, but will only create the Powerpoint file or PDF from the existing puzzles in your project folder. (You have to make sure there are no additional puzzles or other files that you don't want to appear in the book).

Puzzle Maker Pro - Time Saver for Zig Zag Word Search Introduction

The Time Saver for Zig Zag Word Search resembles the Time Saver for (regular) Word Search, but the way word lists are handled is a bit different.

This tutorial applies to:

The Time Saver for Zig Zag Word Search will work with the squares, diagonals, words snake and random shapes options.

Time Saver Overview

The Time Saver needs two ingredients to work correctly:

Word Lists
Jobs to do

You can set up the 'Jobs to do' on the Batch Creation tab. A job is a specific puzzle type and format, for example "Squares" 10x10 with Quantity 5. This will create 5 puzzles for each (!!!) word list. If you set up 3 word lists, with enough words in each, you will get 15 puzzles.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/6zXxjw2BoS/Time%20Saver%20Word%20Search%20Diagram.JPG (Time Saver Word Search Diagram.JPG)

Main Settings

There are a couple of layout settings that control some of the styling for Instant Puzzle Books, such as the puzzle alignment and the font size for the word lists.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/fmgnyGujJc/Zig%20Zag%20Word%20Search%20Time%20Saver%20Main%20Settings.png (Zig Zag Word Search Time Saver Main Settings)

Variable Font Size - the font size is calculated for each puzzle, based on the number of words and the word length. For puzzle books this may lead to different font sizes for each puzzle, especially if you use different sizes for the puzzle (a 10x10 puzzle will have fewer words than a 25x25 puzzle)
One Size Fits All - the font size is calculated after all word lists are set up, to make sure each page looks similar

Word Lists

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/T6UYyswPDI/Zig%20Zag%20Word%20Search%20Time%20Saver%20Word%20Lists.png (Zig Zag Word Search Time Saver Word Lists)

Selecting Word Lists

Each word list should be just a text file with a list of words, for example when you create a file with Notepad.

You can select as many files as you want, and it's best in general to make the wordlists larger than the strict minimum. For example, for a 10x10 grid, the combined length of the words should be at least 100. However, when you create a list of more words, with a combined length of say 500, you'll get a larger variety of puzzles from it.

Word List Control

Just like the regular Zig Zag Word Search, you can choose how the word list should be used:

Auto: This will try to create as many puzzles as the Quantity setting indicates. However, if it runs out of words in the list, it will stop.
Repeat: This will use all the words in the list, and then repeat the entire wordlist (again and again) to get to the number of puzzles in the quantity setting. Each puzzle will draw random words from the list, so each puzzle will be different
Reset: This will reset the entire word list after a puzzle is created, so every puzzle can use words from the entire word list.

Merging Word Lists

You can choose to Merge all lists, to create just 1 large list. This will basically just add all words to a single list.

You can also choose to use each word list separately, which would work like the diagram above (each 'job' will be executed for each of the word lists). In this case you can also use the file names as titles.

Segmented Word Lists

Segmented word lists are available as part of the Extras Add-On, but are also available automatically as part of the Time Saver Add-On. This will allow you to combine multiple short word lists into one larger list, while still keeping the words separate.

Basically, you can use a blank line to separate the lists:

Optionallly you can add a title to each list, which will be used for the Instant Puzzle Books

In the future there may be other options for these segmented word list, to exploit additional features of the Instant Puzzle Books

Batch Creation Settings

When you use the Time Saver, don't forget to select "Use Time Saver to generate Puzzles" and to select the options for Batch Creation you want to use (e.g. "Use Time Saver - Fast"). This will change the text of the "Create" button to "Create (TS)".

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/66Euj4Po0j/Zig%20Zag%20Word%20Search%20Time%20Saver%20Batch%20Creation.png (Zig Zag Word Search Time Saver Batch Creation)

Fast Mode

This options is called 'Fast' because it doesn't depend on you setting up specific puzzle presets, but simply select the Zig Zag Word Search variation you want to use, and set the rows, columns and quantity. Additionally you can set the Sort Order, this will control the order in which the puzzle appear in your puzzle book (and the order in which the files are listed in File Explorer, if you sort them by filename).

Preset Puzzles

With this option you can use your own presets (that you have saved on the Puzzle Settings tab for Zig Zag Word Search) to create an entire batch of puzzles.

Question 9

How to use Puzzle Maker Pro - Zig Zag Word Search

Accepted Answer

Puzzle Maker Pro - Zig Zag Word Search Overview

Zig Zag Word Search is an alternative Word Search puzzle, quite different from the regular Word Search. It's also known as Jigsaw and Tetris Word Search.

This tutorial applies to three different products:

Zig Zag Word Search, the standard / regular Zig Zag Word Search module
Zig Zag Word Search - Extras Add-On, an add-on module that adds different complexities and options to the regular Zig Zag Word Search
Zig Zag Word Search Random Shapes, this module can be purchased separately, and adds random shapes (random polygons) to make a completely different type of word search

Additionally there are some Add-Ons available for Zig Zag Word Search

Time Saver for Word Search, this is the same purchase as the regular Word Search. If you already own the Standard Word Seach time saver, you won't need to purchase it a second time.
Masks for Zig Zag Word Search, coming soon

This main tutorial uses the regular Zig Zag Word Search for examples. Paragraphs for the Extras Add-On and the Random Shapes will focus on the differences for these modules.

Zig Zag Word Search Explained

Zig Zag Word Search is a puzzle where you have to find words in a grid. Unlike with regular Word Search puzzles, the words are not placed in straight lines, but a zig-zagging line, where the words can have corners. For generating these we have set up some basic rules:

Letters of a word are connected to each other horizontally or vertically
In general, the words should have exactly the number of letters required for the squares in the grid. If you have a 10x10 grid, then all words together should have 100 letters
Words cannot overlap

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/U78JkEdbbn/Zig%20Zag%20Word%20Search%2010x10%20Grid.png (Zig Zag Word Search 10x10 Grid)

In this image you see an example of a solution for a Zig Zag Word Search puzzle. Words are positioned randomly in the grid.

Zig Zag Word Search Overview

To use Zig Zag Word Search, select the puzzle type in the drop down menu.

To see the solution in the preview screen, toggle the "Preview Solution" option at the bottom right of the window:

Note: You'll need words with at least 100 letters to create a 10x10 puzzle. It's better to use a longer list with more words than needed, and create one or more puzzles from that. This way you won't have to worry about counting the letters. (See "Advanced Options" for additional options.

In addition to the Word List, you can also select a Word List file. This has to be in plain text format (.txt). Pay attention to this when you export from MS Word or MS Excel.

Advanced Options

The Advanced tab has some options to control the word list use, the spelling of the words, and an option for filling the remaining squares with random letters, so the amount of letters doesn't have to be exactly the right amount.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ofFn83RSUK/Zig%20Zag%20Word%20Search%20Advanced%20Options.png (Zig Zag Word Search Advanced Options)

1 Wordlist Control

For most puzzles you can control the amount of puzzles using the "Quantity" setting. For Zig Zag Word Search there are other options as well:

Auto: This will try to create as many puzzles as the Quantity setting indicates. However, if it runs out of words in the list, it will stop.
Repeat: This will use all the words in the list, and then repeat the entire wordlist (again and again) to get to the number of puzzles in the quantity setting. Each puzzle will draw random words from the list, so each puzzle will be different
Reset: This will reset the entire word list after a puzzle is created, so every puzzle can use words from the entire word list.

Note: This may work slightly different if you use the Extras Add-On.

2 Remove Characters

Your wordlist may contain characters that you don't want to see in the puzzle. These may be spaces, dashes, or other characters. You can use both checkboxes to filter these characters. The word list will be created from the original words!

Note: the letter count used for the puzzles is based on the 'clean' words, after the spaces etc have been removed.

3 Random Fills

While the words for a Zig Zag Word Search puzzle should have exactly the right number of letters, there's an option to add noise or fill letters as well. This should make it a bit easier for you to set up word lists (but please be aware that your customers may not expect this).

Style

On the Style tab you can change the font, canvas and cell colors and the line colors and weight. (Canvas color is only used for masks, without masks, the entire canvas will be covered by cell backgrounds).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/AdD6AV04xS/Zig%20Zag%20Word%20Search%20Style.png (Zig Zag Word Search Style)

Click "Next Preview" after changing the settings to see the result.

Extras Add-On

The Extras add-on offers two additional features: Diagonal connections for the regular Zig Zag Word Search, and segmented word lists for all Zig Zag Word Search modules.

Diagonals

Choose "Squares Diagonals" in the Grid Type list, then click "Next Preview" to see an example of a Zig Zag Word Search puzzle with diagonal connections.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/icYNvsua2n/Zig%20Zag%20Word%20Search%20Diagonals.png (Zig Zag Word Search Diagonals)

As you can see, letters can be connected horizontally, vertically and diagonally, and the diagonal connections can cross each other.

Segmented Word Lists

We use the name "Segmented Word Lists" for word lists that are already divided in several lists of words.

You can do this by using a blank line between the words. Additionally, you can use #title:"title" to add a title, for example "#title:Vegetables"

When you load a word list (click the little looking glass button on the Word List tab), you'll get a status notification showing you how many words and letters are part of each section. (This will take into account that spaces and other characters may be removed).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/9FCBZyPQ9y/Zig%20Zag%20Word%20Search%20Word%20Count.png (Zig Zag Word Search Word Count)

When you use the "Auto" setting for word list control (on the Advanced tab), only one puzzle will be created for each 'segment'.

Random Shapes

To use the Random Shapes variation of Zig Zag Word Search, select "Random Shapes" in the Grid Type list, and click preview. This will display a puzzle like the example below:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/m7FqP0n850/0-20221012105539--1-W-P.png (0-20221012105539--1-W-P)

Variation 1 Step 1 - Specify which letters to remove

On the 'Advanced' tab for Word Search Puzzle Settings, you can find an option 'Remove Other'. Although originally intended to remove certain symbols in other languages, such as ', `, and - in French words and word combinations, you can also use this setting to create Missing Vowel puzzles.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/7fxuVbZOfJ/Word%20Search%20-%20Hidden%20Vowels%201.png (Word Search - Hidden Vowels 1.png)

In the screenshot you can see that we chose to remove A, E, I, O, U and Y. Y isn't considered a vowel in all languages, but for this example it is.

By its nature, missing vowel word search puzzles will be very compact, since all the words will be a lot shorter and easier to connect to other words.

Warning: There are quite a few words that will result in just a single letter if you remove the vowels, such as 'age', 'ago', 'aid', 'aide', 'no', 'any', or two letters , like 'all', 'ally'. Especially the single letter results will make the puzzle hard or impossible to solve, since a single 'g' or 'n' could also be randomly chosen for an empty square. Please make sure that you check your word list and the resulting puzzle to verify that it's the puzzle you want to publish.

Variation 1 Step 2 - Fill the Empty Squares

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JRFwKRSPyq/Word%20Search%20-%20Hidden%20Vowels%202.png (Word Search - Hidden Vowels 2.png)

On the 'Solution' tab you can specify which letters you want to use for the empty squares, in the 'Hidden Word' section. It makes sense to remove the vowels from this list as well.

Variation 2

In this variation, empty spaces are left over where vowels should go. For this we select the "Hide Vowels" option. As with variation 1, you can choose what you consider a vowel, as this could be different depending on your language.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/0EADBJUkkX/Puzzle%20maker%20word%20search%20no%20vowels.jpg (Puzzle maker word search no vowels)

Now, in the image above you still see the vowels, because we are looking at the solution. However, if we turn off "Preview Solution" in the bottom right of the screen, we see that all vowels have been removed, leaving only a blank space.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/FXZKRvfDy6/No%20vowels%20word%20search.jpg (No vowels word search)

How to create Reverse Word Search puzzles?

How to use the CSV Splitter in Puzzle Maker Pro

What are Presets in Puzzle Maker Pro

How to use the Time Saver for Word Search (v2023.3.3 and newer)

How to use Masked Word Search Puzzle Presets in the Time Saver for Word Search (for Puzzle Maker Pro version 1 to 2023.3.2)

How to create Full Page Word Search puzzles with Puzzle Maker Pro

How to use the Time Saver for Standard Word Search

How to use the Time Saver for Zig Zag Word Search

How to use Puzzle Maker Pro - Zig Zag Word Search

How Can I Create Missing Vowel Puzzles with Puzzle Maker Pro - Word Search?