Question 1

How do I create shaped word search puzzles

Accepted Answer

Welcome to the tutorial on how to use the Masks add-on for Puzzle Maker Pro - Word Search.

The techniques used in this word search require you own one of the following versions:

Selecting a Mask

If you select the "Use Mask" tab on the module, you can open up the Grid Editor to fine-tune masks.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/d1YYrhktrp/Word%20Search%20use%20mask.jpg (Word Search use mask)

As you open up the Grid Editor, you'll see a new screen with several options.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/NXYnn2p6In/Word%20Search%20mask%20grid%20editor.jpg (Word Search mask grid editor)

The Grid Setup. This is the same amount of rows and columns you are already using for your Word Search puzzle, but if you want to adjust the size, here is where you do that.
The option to select a mask file, or clear the mask entirely. If you choose "Select file" you will go to windows explorer, where you can select the correct file to use.
Choosing the background colour. Most .png files have a transparent background. Some other files may use white as background. Because of that, these two options are always selected. But say your mask uses a white cloud over a blue sky? then you can turn off the White, and instead select blue as the background colour, so the shape of the cloud shows up, instead of everything but the cloud.
Presets. You can save what you've done with your mask, and re-use that for later puzzles if you choose to do so. If you've already made a preset, you can load it here.
The mask screen. You can see how your mask currently looks. As a standard, everything is selected.

Now let's import a mask and see what that does.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JBTxu70W1h/Word%20Search%20mask%20selected.jpg (Word Search mask selected)

Finetuning your mask

On the left, you can see the preview of the file, and on the right you can see what the mask looks like now.

If you want to, you can click on the right part of the screen to add or remove tiles from the puzzle. Or if the puzzle doesn't look right, you can change the size of the mask. Because this looks a bit strange, I've personally changed the format to 15 rows and 15 columns.

Once you're done, select "use mask" in the bottom right, and see what your puzzle looks like now.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/OtaI7rrPbp/Word%20Search%20mask%20added.jpg (Word Search mask added)

As you can tell, the program automatically resized the puzzle as soon as I made the mask 15 by 15. It also makes sure that all words stay within the mask used.

Now, you can either keep the mask this way, but you can also add "Print Mask as Background". This does exactly what it advertises, and turns the file you used as a mask into the background for the puzzle. This works incredibly well with some pictures, but is not a mandatory step to use.

The Masks Add-On for Puzzle Maker Pro - Mazes 2D Squares

With the Masks Add-On for Mazes 2D Squares you can create shaped mazes. Mazes in the shape of anything you want.

This add-on supports three different styles of mask creation:

Quick Masks
Create masks in the Mask Editor using a silhouette
Create masks in the Mask Editor manually

Of course you can also combine the two: Use a silhouette first, and then manually edit the resulting mask.

You can find the mask options under the Mask tab.

Mazes 2D Squares - Mask Tab

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/MtMjI9wSGg/Mazes%202D%20Squares%20-%20Mask%20Tab.png (Mazes 2D Squares - Mask Tab)

To use a Mask, the first step is to click the “Use Mask” checkbox. That will let the software know that it should use a mask. (You can also uncheck it, to temporarily disable a mask that you’ve set up).

Whenever you switch the Maze Type, the mask will reset.

Note: the details may work slightly different for different shapes, but the main mechanics are the same.

This tutorial applies to the following products:

Masks Add-On for Puzzle Maker Pro - Mazes 2D

Quick Masks

The easiest option to create a mask, is the Quick Mask option.

First, you need to select an image. Either beither clicking the white panel below the “Use Quick Mask” checkbox, or by dragging your image onto that panel.

Next, click the “Use Quick Mask” button, and click “Next Preview”.

Mazes 2D Squares - Quick Mask

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/rGIxqazIvV/Mazes%202D%20Squares%20-%20Quick%20Mask.png (Mazes 2D Squares - Quick Mask)

When you do this, there can be different outcomes:

You get a shaped maze, like the example screenshot.
Nothing happens
You get a result, but it’s underwhelming

After the Quick Mask is generated, the “Use Quick Mask” checkbox will be unchecked automatically – Generating a mask from a bitmap image takes time, and you may not want to generate the same mask over and over, while you’re adjusting style settings (or selecting different tiles).

However, if you want to create a new mask with the Quick Mask feature, because you changed the grid size or the image, you have to manually check this checkbox again.

Quick Mask - Nothing Happens

The Quick Mask option will try to generate a mask, using the grid settings (the number of rows) and the image you selected. It will do so by analyzing the silhouette image, using AI to find settings that result in a "Connected Mask" is created.

Connected Mask – To create a maze, all the cells in the grid must be connected. When you use a mask that results in separate ‘islands’ of cells that are not connected, the mask cannot be used.

If the AI cannot find a Connected Mask the Quick Mask generator will give up, and there will be no mask.

Underwhelming Results

In many cases, especially when you’re first starting to use the Masks Add-On, the result may be a bit underwhelming. The screenshot shows an example of what can happen:

Mazes 2D Squares - Mask Underwhelming Result

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/UXRLQg5SpU/Mazes%202D%20Squares%20-%20Mask%20Underwhelming%20Result.png (Mazes 2D Squares - Mask Underwhelming Result)

Even though we started with the silhouette of a car, and a mask was created, the resulting image and the maze do not resemble a car. This is not a bug: The mask generator did what it’s supposed to do – each cell that has enough colored (in this case black) pixels, will be added to the maze.

However, when the grid is too small (in this case 12 rows) and the lines of the silhouette are too thin, the cells won’t be part of the mask. In this case the roof of the car, and the top of the headlights are not part of the mask.

You can increase the number of rows for the grid, to create a better mask, or optionally use the Mask Editor to manually create a good mask based on the silhouette.

Mask Editor - Using a Silhouette

To create a mask from an image, you’ll need an image that can work as a silhouette: You can set which background color(s) to remove from the mask, and all other colors will be part of the mask. The masks feature won’t work well with line-art images.

When you click “Edit Mask”, you’ll see the Mask Editor:

Mask Editor Overview

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/RQbQUfYO33/Masks%20Add-On%20Mask%20Editor.jpg (Mask Editor Overview)

The resulting mask. If you already had a mask selected, it will be shown here, otherwise all cells will be part of the mask,
The image selection panel. Either click here to select an image, or drag and drop an image onto the white panel
Depending on the image, you may need to adjust the background color
At the top you can see a status message. In the screenshot it’s green “Cells are connected”. If there are disconnected ‘islands’ of cells in your mask, it will show a warning in red.
After selecting an image, you can change the Mask Sensitivity to create a better result,
After changing the grid size or Mask Sensitivity, click “Scan Image” to create the new mask from the current image. This will overwrite any manual changes that you’ve made.

You can toggle each square (or tile) in the mask by clicking on it, or by using the advanced editing options:

Setting the background color

For regular silhouette images, the background will be either white or transparent. You can also select a different color, or even switch the foreground and background for a silhouette image. It’s also possible to use white and a selected other color and transparent as three different options to determine the background.

Changing the Mask Sensitivity

The Mask Sensitivity is the threshold for background pixels in each cell (square or isometric). If there are more background pixels than that threshold, it will be excluded from the mask. Otherwise it will be included. You can manually adjust the threshold to create a slightly different mask from your image.

Three examples of different Mask Sensitivity settings:

Mask Editor - Scan Sensitivity

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/I3rpsYCuEO/Masks%20Add-On%20Sensitivity.jpg (Mask Editor - Scan Sensitivity)

Create Masks Manually

Click on the “Manual Editing” tab (in the Mask Editor) to reveal the advanced editing options:

Masks Add-On Manual Mask Editing Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/zLPM5rq2AZ/Masks%20Add-On%20Manual%20Mask%20Editing%20Options.jpg (Masks Add-On Manual Mask Editing Options)

Action - Toggle will switch the color from black to white and vice versa. This will include or exclude the cell or range from the mask.
Action - Copy Color will copy the color of the clicked cell to all the cells in the range
Range Type: When you click on a single cell (tile), you can select whether just the cell, the row or the column have to change color
Range Size: Adjust 1, 3 or 5 cells, rows or columns at a time

The screenshot shows the result after two mouse-clicks:

Click on a cell with Action “Toggle”, Range type “Row” and Range Size “3”
Click on a different cell with Action “Toggle”, Range type “Column” and Range Size “3”

You can see that by using Toggle, some of the white cells in the rows have turned black again. By using “Copy Color” you can prevent this.

You can also see that the result of these two actions is a maze that is NOT connected (see the red warning at the top of the window). I’d have to do more editing to make this into a good shape for a maze.

Note: clicking the cells for editing is somewhat sensitive. If you move the mouse while clicking, the software will not know whether you want to move or click. (If you zoom in, using the mouse wheel, you can click and drag the image, to view exactly the part that you need to see best).

How do I create shaped word search puzzles

Masks Add-On for Mazes 2D Squares Video Overview

How to use the Masks Add-On for Puzzle Maker Pro - Mazes 2D Squares