Question 1

Masks Add-On for Mazes 2D Squares Video Overview

Accepted Answer

Masks Add-On for Mazes 2D Squares Video Overview

Question 2

How to use the Time Saver for Puzzle Maker Pro - Mazes 2D

Accepted Answer

How to use the Time Saver for Puzzle Maker Pro - Mazes 2D

The Time Saver for Puzzle Maker Pro - Mazes 2D works for:

The Time saver consists of two distinct parts:

Batch creation of mazes
Advanced layouts options with grids up to 10x10 puzzles or solutions

Batch Creation of Mazes

There are several ways you can control the mazes that are generated by the Time Saver

Using Presets
Enter rows in the control grid
Add images for masks using the Quick Mask options

We'll discuss these different options in the paragraphs below.

Batch Creation using Presets

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Bgl3MfS42X/Mazes%202D%20Time%20Saver%20Presets.png (Mazes 2D Time Saver Presets)

To use this option, don't forget to click (check) the options "Use Time Saver" and "Use Time Saver - Preset Puzzles".

Click the tab "Preset Puzzles" on the Time Saver tab. At the left you can see all the presets for Mazes 2D. If they're not visible yet, click "Refresh List".

The presets shown here are presets that you have saved yourself. There are no built-in presets, since it's so very easy to create your own.

You can select one or more presets (using Shift / Ctrl to select multiple presets) and click "Add Selected". The default quantity for each preset is 1, you can change this by clicking on the number you want to change.

Preset puzzles can be combined with the "Fast" mode for the Time Saver.

Batch Creation using the Control Grid

When you use the Control Grid (the "Fast" option), The Time Saver will use most of the settings from the regular "Puzzle Settings". These will be overruled by the specific settings that can be entered in the grid.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/mOYcLeAuzp/Mazes%202D%20Time%20Saver%20Fast.png (Mazes 2D Time Saver Fast)

Select the maze type that you need, the quantity and the grid size (Rows / Columns)
Click "Add Row" to add a row to the Control Grid
Change options as needed in the Control Grid by clicking the number or item you want to change
Click "Create (TS)" to create the puzzles and optionally the Instant Puzzle Book

Batch Creation using Quick Masks in the Control Grid

If you have the Masks Add-On, you can use the Quick Masks option:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/v4rKADjwcp/Mazes%202D%20Time%20Saver%20Quick%20Mask.png (Mazes 2D Time Saver Quick Mask)

Set the maze type and grid size that you need. You should set the Quantity to 1, unless you want several puzzles with identical masks
Click "Add Quick Mask". This will open the file explorer on your computer, allowing you to select one or several images. For each image, a row in the Control Grid will be added
Change options as needed
Click "Create (TS)" to create the puzzles using the Time Saver.

The Masks Add-On for Puzzle Maker Pro - Mazes 2D Squares

With the Masks Add-On for Mazes 2D Squares you can create shaped mazes. Mazes in the shape of anything you want.

This add-on supports three different styles of mask creation:

Quick Masks
Create masks in the Mask Editor using a silhouette
Create masks in the Mask Editor manually

Of course you can also combine the two: Use a silhouette first, and then manually edit the resulting mask.

You can find the mask options under the Mask tab.

Mazes 2D Squares - Mask Tab

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/MtMjI9wSGg/Mazes%202D%20Squares%20-%20Mask%20Tab.png (Mazes 2D Squares - Mask Tab)

To use a Mask, the first step is to click the “Use Mask” checkbox. That will let the software know that it should use a mask. (You can also uncheck it, to temporarily disable a mask that you’ve set up).

Whenever you switch the Maze Type, the mask will reset.

Note: the details may work slightly different for different shapes, but the main mechanics are the same.

This tutorial applies to the following products:

Masks Add-On for Puzzle Maker Pro - Mazes 2D

Quick Masks

The easiest option to create a mask, is the Quick Mask option.

First, you need to select an image. Either beither clicking the white panel below the “Use Quick Mask” checkbox, or by dragging your image onto that panel.

Next, click the “Use Quick Mask” button, and click “Next Preview”.

Mazes 2D Squares - Quick Mask

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/rGIxqazIvV/Mazes%202D%20Squares%20-%20Quick%20Mask.png (Mazes 2D Squares - Quick Mask)

When you do this, there can be different outcomes:

You get a shaped maze, like the example screenshot.
Nothing happens
You get a result, but it’s underwhelming

After the Quick Mask is generated, the “Use Quick Mask” checkbox will be unchecked automatically – Generating a mask from a bitmap image takes time, and you may not want to generate the same mask over and over, while you’re adjusting style settings (or selecting different tiles).

However, if you want to create a new mask with the Quick Mask feature, because you changed the grid size or the image, you have to manually check this checkbox again.

Quick Mask - Nothing Happens

The Quick Mask option will try to generate a mask, using the grid settings (the number of rows) and the image you selected. It will do so by analyzing the silhouette image, using AI to find settings that result in a "Connected Mask" is created.

Connected Mask – To create a maze, all the cells in the grid must be connected. When you use a mask that results in separate ‘islands’ of cells that are not connected, the mask cannot be used.

If the AI cannot find a Connected Mask the Quick Mask generator will give up, and there will be no mask.

Underwhelming Results

In many cases, especially when you’re first starting to use the Masks Add-On, the result may be a bit underwhelming. The screenshot shows an example of what can happen:

Mazes 2D Squares - Mask Underwhelming Result

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/UXRLQg5SpU/Mazes%202D%20Squares%20-%20Mask%20Underwhelming%20Result.png (Mazes 2D Squares - Mask Underwhelming Result)

Even though we started with the silhouette of a car, and a mask was created, the resulting image and the maze do not resemble a car. This is not a bug: The mask generator did what it’s supposed to do – each cell that has enough colored (in this case black) pixels, will be added to the maze.

However, when the grid is too small (in this case 12 rows) and the lines of the silhouette are too thin, the cells won’t be part of the mask. In this case the roof of the car, and the top of the headlights are not part of the mask.

You can increase the number of rows for the grid, to create a better mask, or optionally use the Mask Editor to manually create a good mask based on the silhouette.

Mask Editor - Using a Silhouette

To create a mask from an image, you’ll need an image that can work as a silhouette: You can set which background color(s) to remove from the mask, and all other colors will be part of the mask. The masks feature won’t work well with line-art images.

When you click “Edit Mask”, you’ll see the Mask Editor:

Mask Editor Overview

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/RQbQUfYO33/Masks%20Add-On%20Mask%20Editor.jpg (Mask Editor Overview)

The resulting mask. If you already had a mask selected, it will be shown here, otherwise all cells will be part of the mask,
The image selection panel. Either click here to select an image, or drag and drop an image onto the white panel
Depending on the image, you may need to adjust the background color
At the top you can see a status message. In the screenshot it’s green “Cells are connected”. If there are disconnected ‘islands’ of cells in your mask, it will show a warning in red.
After selecting an image, you can change the Mask Sensitivity to create a better result,
After changing the grid size or Mask Sensitivity, click “Scan Image” to create the new mask from the current image. This will overwrite any manual changes that you’ve made.

You can toggle each square (or tile) in the mask by clicking on it, or by using the advanced editing options:

Setting the background color

For regular silhouette images, the background will be either white or transparent. You can also select a different color, or even switch the foreground and background for a silhouette image. It’s also possible to use white and a selected other color and transparent as three different options to determine the background.

Changing the Mask Sensitivity

The Mask Sensitivity is the threshold for background pixels in each cell (square or isometric). If there are more background pixels than that threshold, it will be excluded from the mask. Otherwise it will be included. You can manually adjust the threshold to create a slightly different mask from your image.

Three examples of different Mask Sensitivity settings:

Mask Editor - Scan Sensitivity

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/I3rpsYCuEO/Masks%20Add-On%20Sensitivity.jpg (Mask Editor - Scan Sensitivity)

Create Masks Manually

Click on the “Manual Editing” tab (in the Mask Editor) to reveal the advanced editing options:

Masks Add-On Manual Mask Editing Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/zLPM5rq2AZ/Masks%20Add-On%20Manual%20Mask%20Editing%20Options.jpg (Masks Add-On Manual Mask Editing Options)

Action - Toggle will switch the color from black to white and vice versa. This will include or exclude the cell or range from the mask.
Action - Copy Color will copy the color of the clicked cell to all the cells in the range
Range Type: When you click on a single cell (tile), you can select whether just the cell, the row or the column have to change color
Range Size: Adjust 1, 3 or 5 cells, rows or columns at a time

The screenshot shows the result after two mouse-clicks:

Click on a cell with Action “Toggle”, Range type “Row” and Range Size “3”
Click on a different cell with Action “Toggle”, Range type “Column” and Range Size “3”

You can see that by using Toggle, some of the white cells in the rows have turned black again. By using “Copy Color” you can prevent this.

You can also see that the result of these two actions is a maze that is NOT connected (see the red warning at the top of the window). I’d have to do more editing to make this into a good shape for a maze.

Note: clicking the cells for editing is somewhat sensitive. If you move the mouse while clicking, the software will not know whether you want to move or click. (If you zoom in, using the mouse wheel, you can click and drag the image, to view exactly the part that you need to see best).

Masks Add-On for Mazes 2D Squares Video Overview

How to use the Time Saver for Puzzle Maker Pro - Mazes 2D

How to use the Masks Add-On for Puzzle Maker Pro - Mazes 2D Squares