Question 1

What are Presets in Puzzle Maker Pro

Accepted Answer

There are many ways to fit Puzzle Maker Pro in your workflow. To help you to keep your layouts and styling consistent, we introduced 'Presets' in one of the earliest version.

What is a Preset

A Preset is basically the list of all the settings you can use for a puzzle. What is saved in a preset for Sudoku is different than for Word Search. In general, all the settings and options that are shown on the Puzzle Settings tab are part of it.

Time Saver Presets

In the Time Saver tab you can also find presets. These contain all the settings on the Time Saver tab (and sub-tabs) for that puzzle type. For example, for Sudoku, it will contain the entire table of sudoku variations and quantities. For Word Search it will include the word list and the table of puzzle sizes, along with the Main settings.

It is not required to use presets at all, but in some cases it can make your workflow more efficient.

Presets and Word Puzzles

A specific use case is when you generate word puzzles, such as Word Search: The word list you select for Word Search is part of the preset. When you 'load' that preset, you should see the same word list or word list file displayed.

When you use the Time Saver for Word Search, you can use select these (word search puzzle) presets to generate a puzzle book, and choose the option to use the word list that's included in that preset.

Please note: Puzzle Maker Pro supports different workflows. You don't have to use the presets, it's an option that may work for you.

Alternatively you can use a single preset for consistent styling of your puzzles, and use the Time Saver to override the word list.

Question 2

How to use the Time Saver for Word Search (v2023.3.3 and newer)

Accepted Answer

This tutorial shows how to use the Time Saver for Word Search (v2023.3.3 and newer)

The tutorial applies to (both are required):

Standard Word Search, with the
Time Saver for Word Search

Introduction

With Puzzle Maker Pro version v2023.3.3, the Time Saver for Word Search has undergone significant changes. It now lets you combine multiple puzzle types in one single table (more about that later). This allows you to completely set up your puzzle book to look the way you want.

Using this Time Saver consists of 3 steps, before you click the "Create" button:

Set up the 'global' options for the puzzles and puzzle book,
Select the Word Lists you want to use in your puzzle book,
Configure the puzzles you want to generate and include in your puzzle book.

A good way of learning to use this version of the Time Saver is to play around with the word lists and puzzle configuration first. You can easily create 'test' puzzle books in Powerpoint or PDF format, to see the results of certain options, and delete these files when you're done.

Set up the Global Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/DoHTuPZd9K/Word%20Search%20TS2%20-%20Main%20Options%20Merge.png (Word Search TS2 - Main Options Merge (1).png)

First of all, you'll have to click the "Use Time Saver" checkbox at the top of the page to activate the Time Saver. The text for the "Create" button at the bottom will change into "Create (TS)".

Word List Use Options

The "Word List Use" options will override the similar options for the Word Search Puzzle Settings tab.

When you create several puzzles (for example, when you set quantity to 10), you can specify that words will only be used once (1). This means that you get a set of puzzles that don't use the same words. However, processing may stop when all words have been used.
Minimum Words for Final Puzzle will make sure there are enough words in the last puzzle, or it will stop generating puzzles. For example, if you have a list of 100 words, and the first two puzzles together use 85 words, you will not get a third puzzle, because there are only 15 words left for the puzzle.
"Stop when all words have been used" - In the previous example, you can order Time Saver to stop, so you get only 2 puzzles, or you can uncheck this options. In that case it will reset the word list and start over, with all words available for the next puzzle.
"Merge All Word Lists" (2) - If you specify more than 1 word list on the "Word Lists" tab, you may want to merge them into one large word list for all your puzzle. This allows you, for example, to use a Christmas themed word list, and a general word list together, so each puzzle will have some themed words and some words from the general list.

Layout Options

Word List Font Size
- With the default 'Variable Font Size' you may get a different font size for the different word lists, depending on the length of the words and the number of words. It's a matter of style choice whether you like this.
- You can also set it to "One Size Fits All". That will analyze all the word lists to find the largest font size that allows all the word lists to be printed in the available space.
- With "Fixed Font Size" you can explicitly specify the font size. With this option it makes sense to generate a test version of your book and check this manually: If you set the Font Size too large, some words may not be printed due to the available space the word lists.
Alignment - you can set the alignment of the puzzles in the available space. For example if you have one puzzle per page, with a trim size of 8.5" and 0.5" margins, that would leave 7.5" for the puzzle. Usually the height will then only be 4 or 5" (since the title and word list require some space as well), a square puzzle would be printed at a 5x5" size. You can set whether it should be aligned left, center or right. Additionally, you can 'force' Puzzle Maker Pro to align the word lists with the puzzle, to make the page look more compact.
In some cases, for example religious puzzle books, you may want to add a "Filtered Words" List. This is a list of words that should not appear in the puzzle by accident. (Please note: this will NOT filter words from the regular words list. If you use the word "homeowner" in a word list, and the word "meow" is in your filtered word list, the word "homeowner" can still appear in the puzzle!

Separate Word Lists

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/btqPiaMLWf/Word%20Search%20TS2%20-%20Main%20Options%20No%20Merge.png (Word Search TS2 - Main Options No Merge)

You can also choose to keep all word lists separate. In that case you can even use the word list file name as a title for the puzzle.

For example, if you have a word list "dinosaurs.txt", it can use the word "dinosaurs" as a title. When it results in several puzzles (e.g. quantity is set to 2 or higher), the puzzles will be numbered dinosaurs 1 and dinosaurs 2.

You can set up your own title format:

"Puzzle" is printed as is. You can type a different word here, or leave it out. For example for other languages you can change this.
"#" is the puzzle number. All puzzles in your book are numbered, unless you click "Don't Number the Puzzles".
%TITLE% is a placeholder that will be replaced with the name of the word file. The way this is set up in the screenshot could result in a puzzle title like "Puzzle 113 dinosaurs".

Select the Word Lists

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/KGUmdNLMBr/Word%20Search%20TS2%20-%20Word%20Lists.png (Word Search TS2 - Word Lists)

On the next tab you can select your word lists. Each file should be a plain text file with ONLY the words you want to use, each word on a separate line. Each line will be considered a separate word for the puzzles.

An example:

Configure the Puzzles

To specify which puzzles you want to generate and print in your puzzle book, go to the "Batch Creation" tab. Please don't let the numbers and arrows in the screenshot below overwhelm you.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Sy9kpXa2K9/Word%20Search%20TS2%20-%20Batch%20Creation.png (Word Search TS2 - Batch Creation)

What you see here is a table that contains a row for each puzzle configuration that you want to create. Regular puzzles with just the number of rows and columns, Preset puzzles from your own Word Search presets, and Mask puzzles, from your own saved masks.

At the top left, you can set the Default Quantity (1) for each row you add. By default it's set to 1. You can also edit the configuration for each row later on, just by clicking on the cell you want to change.

You can move rows up and down by selecting a single row and clicking the "Row Up" or "Row Down" buttons.

You can delete rows from the table by selecting one or more rows and clicking the "Delete Selected" button, or clicking the "Delete All" button. Deleting rows from this table will NOT delete presets or saved masks.

Adding Regular Word Search Puzzles (2)

The easiest way to add puzzles, which was called 'Fast' in the older Time Saver, is by setting the number of rows and columns. In box (2) you can see that both the Rows and Columns are set to 20. When you click the button "Add", it will add a row to the table:

Type: R (Regular), this identifies the type of puzzle for that row
(File) Name "Rectangle". This has no further meaning for Regular puzzles
Word List "Default". See "Word List Setup for Specific Puzzles" below for details.
Rows / Cols: The number of rows and columns for the word search puzzle
Quantity: The number of puzzles to generate
Number of Words: The number of words for the puzzle. A value of 0 (zero) means unlimited, as many as can be fit in
Diag: Allow Diagonals for the puzzle
Rev: Allow Reversed (Backwards printed) words for the puzzle
BG: Not relevant for Regular puzzles

Adding Word Search Puzzle Presets (3)

To use your existing Word Search Puzzle Presets to the list, click "Add Presets". This will open a window where you can select all the presets you want to add. The information in the table that's specific for Preset rows:

Type: "P" for Preset
(File) Name: The name of the preset
Word List: See "Word List Setup for Specific Puzzles" below for details.

Adding Word Search Saved Masks (4)

To use your existing Saved Masks to create puzzles, click "Add Masks". This will open a window where you can select all the masks you want to add. These are mask that are saved from the Mask Editor that's shown when you click "set Mask" in the Puzzle Settings tab for Word Search puzzles. The information in the table that's specific for Mask rows:

Type: "M" for Mask
(File) Name: The name of the saved masks file
BG: Print the mask silhouette as a background for the puzzle. You can switch this on and off for each row of type Mask. Additionally, since you probably want to have a consistent approach to printing mask, you can set the default value for this option in box (4): Print Mask as Background

Word list Setup for Specific Puzzles

The "Word List" column in the table gets the value "Default" for each new row. There are some other options.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/KqsfjZax9w/Word%20Search%20TS2%20-%20Word%20List%20in%20Row.png (Word Search TS2 - Word List in Row)

To change the Word List value for any of the rows in the table, click the down arrow (the 'v' next to Default) to get a list of options.

Default: This will use the default word list setup as defined on the "Main" tab. For each row the word lists will be reinitialized
- Merge All Word Lists: For each row in this table, whether the quantity is 1 or more, the 'merged' word list is initialized and used. That means that the same word can be used for puzzles from several rows. (The option "Use Words Only Once" applies only to the quantity of puzzles for a single row)
- Separate Puzzles Per Word List: For each row in the table, the next word list will be used. For example, the first row with "Default" will use word list 1, the second will use word list 2, etc. When there are no more word lists, it will start back at word list 1.
Word List From Preset: This will work only for rows with the "Preset" type! It will use the word list that was saved with the puzzle preset. This can be a pasted list of words, or a word list file. (If you use this setting for the other rows in the table, it will revert to "Default" when processing the table
A specific Word List file: You can also select any of the word list files that you added to the "Word Lists" tab. You'll need to set up all the word lists you want to use on the "Word Lists" tab, because Puzzle Maker Pro won't know in which folders you store all your word lists. When you select a specific file, such as "Car Brands.txt" in the screenshot, only that file will be used for the puzzle.

Tips and Tricks

The previous version of the Time Saver would 'multiply' the number of word lists with the quantities set in the table. This (new) version will generate exactly the quantities that are set in the table, unless your word lists do not contain enough words.
Setting up Masks or Word Search Presets is a time investment that will pay off. You can choose to either set up a Word Search Preset with a Mask and a Word List, or to just create the Mask and Word List and combine them in the table in the Time Saver. The result will be identical
If you have a Preset with a mask, and you change the number of rows and columns in the table, the mask will not be used. Example: If you have a mask of a cat that has 23 rows and 17 columns, and you change the numbers to 25 rows and 20 columns, the mask will not fit with those dimensions and will not be used
You'll need to add ALL the word lists you want to use, on the "Word Lists" tab. These will be added automatically to the drop down menu for the Word List column
You can add a list of Presets and then add a list of Masks, and use the Row Up / Row Down button to mix them up, if needed. You can also maximize the Puzzle Maker Pro window on your computer to see more of the table.

Preset Locations

All the presets that are saved from within Puzzle Maker Pro are stored on your computer, in subfolders for "Documents\BookPublisherTools\Presets\PMP".

An easy way to find that folder is to click the "Open Presets Folder" button on the Tools tab in Puzzle Maker Pro:

Tools tab Open Preset Folder

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/MLH4neHFkw/Tools%20tab%20Open%20Preset%20Folder.png (Tools tab Open Preset Folder)

When you click this button, it will open Windows File Explorer for the Presets folder:

Presets Folder Word Search

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/2SRRBHFHic/Presets%20Folder%20Word%20Search.png (Presets Folder Word Search)

In this folder you'll find subfolders for each puzzle type and Time Saver add-on. You can double- click a folder to see which presets are saved in it. For example you can double-click the Word Search folder to see all the Word Search presets.

Tips and Tricks

You can delete presets and copy them to a different computer. Please be aware that if the presets refer to other files on your computer, you'll have to copy those too, to exact the same location.

For example, if you have a Word Search preset that refers to a word file "D:/Word List/Occupations.txt": You'll need to copy that file as well, and put it in exact the same location. Otherwise it cannot be found.

For JigSaw, Sudoku and other modules that use images: You'll need to make sure that all the images that are referred to in a preset, will be available in the same locations when you copy a preset.

What are Presets in Puzzle Maker Pro

How to use the Time Saver for Word Search (v2023.3.3 and newer)

How to delete or copy presets for Puzzle Maker Pro