Question 1

How to create a 'Mountains' style pattern with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Mountains style patterns with POD Graphics Maker.

Pattern 00-2 - Mountains is part of POD Graphics Maker Starter Edition and XL Edition.

Question 2

How to use the Zoom function in POD Graphics Maker or Puzzle Maker Pro

Accepted Answer

This Youtube tutorial shows how to use the zoom function in the preview window in POD Graphics Maker.

The same options are available in the Puzzle Maker Pro preview window.

Question 3

How to create a 'Carnival' style pattern with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Carnival style patterns with POD Graphics Maker.

Pattern 00-3 - Carnival is part of POD Graphics Maker Starter Edition and XL Edition.

Question 4

How to create a 'Wind' style pattern with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Wind style patterns with POD Graphics Maker.

Pattern 00-4 - Wind is part of POD Graphics Maker Starter Edition and XL Edition.

Question 5

How to create Squares patterns with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Squares patterns with POD Graphics Maker.

Pattern 00-5 - Squares is part of POD Graphics Maker Starter Edition and XL Edition.

Question 6

How to create Lombart style patterns with POD Graphics Maker

Accepted Answer

This Youtube tutorial shows how to create Lombart style patterns with POD Graphics Maker.

Pattern 04-1 - Lombart is part of POD Graphics Maker XL Edition, and included in Expansion pack 4.

Question 7

How to create patterns from your photos and images with POD Graphics Maker

Accepted Answer

This Youtube tutorial demonstrates POD Graphics Maker Pattern 03-4, using a photo to create a seamless pattern.

Question 8

How to use the Output Settings in Puzzle Maker Pro

Accepted Answer

When you first start Puzzle Maker Pro and try to set up the output settings, it can seem overwhelming. You can use the default settings unless you have specific requirements. Most advanced options have been requested by users (so don't blame us for making it overwhelming)

The Output settings are split between the output settings for puzzle files (the Output Settings tab) and the output settings for Instant Puzzle Books (which can be found under the Instant Puzzle Books tab).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ts0bG9Symp/Puzzle%20Maker%20Pro%20-%20Puzzle%20Output%20Settings.png (Puzzle Maker Pro - Puzzle Output Settings.png)

Puzzle Size (1)

You can set the puzzle size in Pixels or Inches. The conversion from Pixels to Inches depends on the DPI settings.

300 DPI (Dots Per Inch) is the required setting for commercial print - you'll need this if you plan to publish your puzzles with KDP or another Print on Demand service. 96 DPI is best for web or display only.

The size in Pixels or Inches is always used for the longest side (horizontally or vertically), and for both sides if the puzzle output is square.

Optimize the Puzzle Size

You can optimize the puzzle size for your puzzle books: A smaller puzzle size will result in a smaller PDF or PPT file size.

For example: if you are creating a puzzle book with a trim size of 8.5"x11" with 0.5" margins, you'll have a page body that's 7.5" by 10". If you print only one puzzle per page, it doesn't make sense to have a puzzle size wider than 7.5" (or 2250 pixels at 300 DPI), because the size will be decreased when printing the puzzle.

Additionally, if you use a layout with 2 columns and 3 rows, the maximum width would be 3.75" and the maximum height for each puzzle would be less than 3.33" (the titles will be printed as well). In that case you might set the puzzle size for square puzzles to only 3" or 900 pixels.

Unfortunately, as a publisher, you'll need to do some of this easy math yourself. With all the different output options, you can configure the output any way you like.

Puzzle Output Format (2)

The basic output formats are JPG and PNG. These are bitmap formats, and will include some antialiasing, depending on the puzzle type. You can use Transparent PNG as well, but keep in mind that this will need flattening when you publish puzzle books on KDP. (Flattening means, amongst other things, that the transparent color will be replaced with the background color. PDF software (or Powerpoint if that's what you use) will do that for you).

Additional output formats are:

4 bit colors - this works for PNG only, and will result in a much smaller image size. The default format for JPG and PNG is 24 bits - 8 bits for each RGB color, and 32 bits for Transparent PNG). However, 4 bit colors will only work well for black and white / grayscale images
SVG is a vector based format, which is available as an add-on for a limited number of puzzles. (Our goal is to add it to all puzzle types eventually, but that's a long-term project)
XML is a text format that will save the meta-information for the puzzles. This is available as an add-on, and only useful if you use software that can read the XML format and do something useful with it

Custom Puzzle File Name (3)

By default, each time you click "Create", puzzle file numbering will start at 1 (the file also includes a timestamp and other information). If you want to control the numbering, you can set this number. (This number is NOT used for Instant Puzzle Books).

File Location (4)

You can set or select a base folder (or root folder) where all your puzzles and Instant Puzzle Books will be saved.

Folder Options (5)

You can completely customize the folder structure for your puzzles. This folder structure will be placed under the "Root" folder.

Use the dropdown boxes to set each level of the folder structure to Date, Project, Puzzle Type, None or Custom1/Custom2. You can freely enter your own text for Custom1/Custom2 (e.g. a topic or client name)

You can also select one of two date formats.

The resulting Folder Name will be displayed after you change the folder structure.

Where can I find my puzzle files?

The “Tools” tab has a few options related to these file settings.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/hRcdNKV0ER/Puzzle%20Maker%20Pro%20-%20Tools%20-%20Puzzle%20File%20Settings.png (Puzzle Maker Pro - Tools - Puzzle File Settings.png)

In the “Puzzle Files” section on the “Tools” tab, you can:

If you create Additional Output (PDF, PPT), this will include all the puzzles in the folder;

Question 9

How can I create Large Print books using Puzzle Maker Pro?

Accepted Answer

A question that often comes up, is the font size that's used for puzzles that are generated with Puzzle Maker Pro.

Especially when you want to mark a book as Large Print on KDP/Amazon, you really want to know the font size in the books generated with Puzzle Maker Pro.

This is not an easy question to answer, because there are several steps involved, and additionally, not all fonts have the same size at a given font size. (Which has nothing to do with Puzzle Maker Pro).

In general, if you want to publish Large Print books, it also make sense to use a clear font like Arial, to improve readability. If you use a artful font with lots of embellishments, it may satisfy the requirements for Amazon, but still be hard to read for your target audience, resulting in negative reviews.

How are Fonts and DPI related to each other?

First, lets discuss font size and DPI.

DPI is an acronym for Dots Per Inch, and for print you’ll need 300 DPI. All Puzzle Maker Pro images are created at 300 DPI (unless you switch to 96DPI). You don’t have to worry about that.

Font size is measured in points, not in dots or pixels: One point is 1/72th of an inch. Large print, 16 points or larger, means 16/72th of an inch, which is 0.222″ (or larger).

Note: Different tools use different units. For example Microsoft Office uses points, while most image editing apps use pixels.

How do I create a puzzle book with Puzzle Maker Pro

Puzzle Maker Pro uses two steps to create puzzle books:

Create the puzzles,
Create the puzzle book from these puzzles.

Find out more about the two-step approach of Puzzle Maker Pro

How can you find out the font size that's used for a puzzle?

The font size that is used in your puzzles depends on the size of your puzzle, the puzzle type and the puzzle settings. Below you can see the method to find out your font size.

How to set the Puzzle Size

In puzzle Maker Pro, you can select how big you want your puzzle images to be. Starting at 300, up to 3000. With 300DPI that’s 1″ up to 10″.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JOPzyUGUxP/PMP%20-%20General%20-%20Puzzle%20Size.png (How to set the puzzle size in Puzzle Maker Pro)

How to calculate the font size for a puzzle type

The size of the characters that are used to print a puzzle, depends on the puzzle size you’ve selected.

Let’s take regular 9×9 sudoku as an example:

The total puzzle size (let’s say 2700 pixels) is split into 9 rows and 9 columns. Each row has a height of 2700/9, and each column has a width of 2700/9, which is 300 pixels. Which is 1″

Puzzle Maker Pro automatically calculates the font size for each square. By default it uses 80% of the height, leaving 10% on top and 10% at the bottom as margins. For some puzzle types you can modify this ratio, resulting in a different font size.

To calculate the font size, take 80% of 300 pixels, this is 240 pixels (numbers are rounded here). This is not yet the font size in points.

To go from pixels to points, we divide by 300 (300 pixels per inch) and multiply with 72 (72 points per inch). 240 / 300 * 72 = 57.6 points.

Summarized: A 9×9 sudoku puzzle, rendered to a jpg of 2700 pixels, will use a font size of 57.6 points.

However…

That only applies if you print the image at it’s actual size.

How does the font size change when creating a puzzle book from your puzzles?

When you create your puzzle book, the puzzle images will be resized, and usually the size will be reduced.

For example, let’s create a 6×9″ book interior with 0.5″ margins left and right. 6″ minus 0.5″ (left margin) minus 0.5″ (right margin) leaves 5″ for the puzzle.

5″ at 300 DPI is 1500 pixels.

Let's say we created a puzzle of 3000 pixels, resulting in a font size of 64 points.

You can easily see that it needs to be reduced by 50% (1500 / 3000). In which case the font also will be 50% smaller. 64 points / 2 = 32 points. Still a lot more than 16.

For the 9×9 sudoku puzzles, you’ll usually be fine, but for other sudoku puzzles, you’ll need to do the math, unfortunately.

What are the steps to determine the font size?

In most cases it's enough to approximate the font size, as long as it's clearly over 16 points.

Here are the steps:

Calculate the page body width, which is the trim size minus the margins.
Divide by the number of puzzles in a row.
Calculate the number of pixels for each square in the puzzle. This depends on the puzzle type.
Calculate the font size in pixels for each square. This is 80% of the square size (with 10% padding).
Calculate the font size in points from the font size in pixels: inches * 72 = points.

For some puzzles, for example Word Search and Bingo, you can further modify the font size for each font. In that case these calculations get a bit more difficult, but the slider for the font size also shows the percentage. You can use this percentage to calculate the resulting point size.

Question 10

How to select images for your puzzles in Puzzle Maker Pro?

Accepted Answer

Several Puzzle Maker Pro modules, like Sudoku 9x9 Creative, Sudoku Kids Edition and Sudoku Variations, Bingo and Game Maker, allow you to use your own images (cliparts) as symbols in a puzzle.

In this tutorial we will use Sudoku 9x9 Creative as an example. In other modules it works the same, although the option may have a slightly different name.

Preparing your images for use in Puzzle Maker Pro

To use images in Puzzle Maker Pro, they need to be stored on your computer in PNG or JPG format.

Puzzle Maker Pro will reduce the size of the images when they are too large, but will never increase the size. Increasing may result in blurred lines or edges, reducing the quality of your puzzles.

In most cases images can be quite small, this depends on the puzzle size and puzzle type you are using.

The puzzle type defines how many images will be put next to each other horizontally or vertically. For example, Sudoku 9x9 will use 9 images horizontally and 9 images vertically. Sudoku Kids Edition will use 4 or 6 images in each row or column.

A quick example: Let's say you create a Sudoku 9x9 puzzle, the puzzle size is set to 1800 pixels. 1800 pixels at 300 DPI means a puzzle size of 6".

Since there can be 9 images in a row or column, we can easily calculate the minimum size for each image: 1800 divided by 9 is 200. That means the images you use can be as small as 200 x 200 pixels, and still create a fairly large puzzle.

Another example: A Sudoku Samurai puzzle has 21 x 21 squares. If we create a puzzle of 2100 pixels (7" x 7" at 300 DPI), each square will be 100 x 100 pixels. Which is also the size at which your images will be printed in the puzzle.

Note 1: The puzzle sizes in the examples were chosen to make the calculations easy. However, if you will use the puzzles in a puzzle book - for example on KDP - you'll still be limited by the available trim sizes. Even for a large 8.5"x11" puzzle book, the maximum width for the page content is only 7.5", if you use 0.5" margins. 7.5" equalis 2250 pixels at 300 DPI.

Note 2: Even though Puzzle Maker Pro will resize the images to make them fit in smaller squares, this will take processing time. In other words, creating puzzles and puzzle pages will take longer if large files have to be imported and resized to fit.

How to use your images in Puzzle Maker Pro

There are two ways to select the images you want to use:

Click the little image panel to open a file selection window (the same 'dialog' you'll see in most other Windows apps), and select the file you want to use for that panel;
Use drag and drop to select multiple images at once.

How to use drag and drop to import your images to Puzzle Maker Pro

It's easy to use your own images: Just drag the images from your file explorer, and drop them onto one of the little image panels (where the domino tiles are shown).

You can select one or more images, click the left mouse button on one of them, and then move the mouse (while keeping the button pressed) to these little image panels, and let go of the mouse button. The images will be used, for one or more panels, starting at the panel you pointed at.