Question 1

How to set up the Page Format in Easy Journals or Easy Puzzle Books

Accepted Answer

This tutorial explains the Page Setup options for Easy Journals and Easy Puzzle Books (plugins for Powerpoint).

Overview

Trim Size is the official term for the size of your book. When you create books for Amazon / KDP, you can use a fixed number of trim sizes, when you create printables, it's best to stick with a common printer paper format in your country (e.g. Letter for the USA, A4 for Europe).

It takes a couple of steps to set the right Trim Size in Powerpoint, and it actually has a different name, because originally Powerpoint was not intended for books.

The "Page Setup" tab can be found in the Easy Journals plugin and in the Easy Puzzle Books plugin.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/cy3o11TTbK/Easy%20Puzzle%20Books%20030%20-%20Page%20Setup.jpg (Easy Puzzle Books 030 - Page Setup (1).jpg)

Trim Size

You can set the trim size in inches. Click "Set" and it will be applied to your current Powerpoint file immediately.

Margins

Powerpoint doesn't support page margins (because it's created for presentations, not pages), however it does support guides... the dotted lines that help you to align shapes and text.

You can use the Page Setup to add lines for your margins: Set the proper margins in inches, and click "Add Guides".

Note: these margins have a specific color, that will help the Page Setup to remove / replace them when you change the trim size.

Presets

When you've set up the trim size and margins, you can reuse these settings by saving them as a preset (at the top, just below "Page Setup". You can also load presets.

Get from Powerpoint

A final option on this page is "Get Current", which will retrieve the current page format from Powerpoint (the slide height and width), and update the Trim Size settings. This can help you if you're not completely sure wether you set the Powerpoint size to 8"x10" or 8.5"x11".

Question 2

How to Set Up Your Grid for Easy Puzzle Books (plugin for Powerpoint)

Accepted Answer

This tutorial shows how to set up grids for Easy Puzzle Books.

Overview

With the Grid Editor you can set the number of columns and rows, in the red square in the screenshot below.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ZZnqxTZb4Y/Easy%20Puzzle%20Books%20-%20020%20Grid%20Editor.jpg (Easy Puzzle Books - 020 Grid Editor.jpg)

Columns sets the number of puzzles next to each other (horizontally). Rows sets the number of puzzles below each other (vertically).

The grid will be determined by the trim size of your book and the type of puzzle: A 8.5"x11" sudoku book, can easily have 2 columns and 3 rows, unless you want to use a large font size. A coloring book usually has only one image on each page (1 column, 1 row).

Outer Margins

You can set top, bottom, left and right margins that will be excluded from the puzzles area. These margins can be, but don't have to be, identical to the page margins you've set elsewhere.

However, if you want to add additional text, embellishments or other content on your page, you can use the Outer Margins to specify where the puzzles should start. For example: If you place a 2" image or text at the top of each page, you can set the top margin to 2" or 2.5".

Inner Margins

Inner Margins, or padding, is the empty space between columns and rows. In most cases you'll want at least 0.1", or better 0.25", to add enough space.

Square Shapes and Alignment

By default, the grid will divide the available space on the page into a grid, based on the columns and rows settings. This will usually create rectangular placeholder shapes. In many cases, such as sudoku, most word search puzzles, etc, puzzles are square, not rectangular. You can use the option "Use Square Shapes" to create square shapes instead of rectangular.

The six buttons below the "Use Square Shapes" option set the alignment for the text and images: Left - Center - Right and Top - Middle - Bottom. This will determine where square shapes will be placed but also where puzzles will be placed inside the shapes, if the format is not identical to the shape.

Note: For "Auto", these settings will be applied in the background, since there will be no visible placeholder shapes. For "Manual", these settings will be applied to the placeholder shapes only. Once you create a book in "Manual" mode, it will only use the placeholder shapes, not the grid settings.

Title Space

For each puzzle there's a "Title" and an "Image" (the image is the actual puzzle or solution).

When you create a grid, for example with 2 columns and 3 rows, there will be 6 areas. Each of these areas will contain a title and a puzzle. By default, the top 20% of the area is reserved for the puzzle. In some cases this will be too much, and you can adjust this to get the perfect layout for your books.

Note: Once you have found a good layout for a certain type of puzzle and a certain trim size, you can save these settings as a Preset, allowing you to reuse the settings each time you create those books.

Examples

In the examples we used a page size of 8.5"x11"

"Auto" 2x3 Grid

In "Auto" mode, the grid you specify will not be created visibly, until you create a book.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/HMcyXSulkB/Easy%20Puzzle%20Books%20-%20021%20Grid%20Example%201.jpg (Easy Puzzle Books - 021 Grid Example 1.jpg)

In this screenshot you can see we've set the interior margins to 0.25", for a grid of 2 columns and 3 rows. The result is shown below:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Xqgw5GV3OR/Easy%20Puzzle%20Books%20-%20022%20Grid%20Example%201%20Result.jpg (Easy Puzzle Books - 022 Grid Example 1 Result.jpg)

This page was created using a set of sudoku puzzles. As you can see, the space between the columns is far more than 0.25", because the puzzles are square, and centered in the available space for each grid location.

In this case, the titles may be placed a bit too far from the puzzles (which is a matter of taste and design best practices).

Let's reduce the title space to 10%:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/EOdDPo6Gt2/Easy%20Puzzle%20Books%20-%20022%20Grid%20Example%201%20Result%202.jpg (Easy Puzzle Books - 022 Grid Example 1 Result 2.jpg)

"Manual" 3x4 Grid

In this second example, we'll use a 3x4 grid, and set the title space to 15%.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/qM3kgAfcYA/Easy%20Puzzle%20Books%20-%20024%20Grid%20Example%202.jpg (Easy Puzzle Books - 024 Grid Example 2.jpg)

"Use Square Shapes" is not selected for the first results, and look at the screenshot below:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/bwrhnMGsTC/Easy%20Puzzle%20Books%20-%20025%20Grid%20Example%202%20Result%201.jpg (Easy Puzzle Books - 025 Grid Example 2 Result 1.jpg)

The shapes are rectangular, and there's 0.25" space between the shapes.

The next example has "Use Square Shapes" switched on, and you'll quickly see the difference.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XCdevgkb67/Easy%20Puzzle%20Books%20-%20026%20Grid%20Example%202%20Result%202.jpg (Easy Puzzle Books - 026 Grid Example 2 Result 2.jpg)

Note: In the "Manual" mode, each of these blue shapes will be replaced by a puzzle image. If the puzzle does not have the same format (square or rectangular with the same ratio), it will reduce the size of the puzzle image to make it fit inside the blue placeholder.

Note 2: The placeholders in these images are blue because that's the default setting for Powerpoint on this computer. You may have other settings. The color is not important, because the shape will be replaced by a puzzle later on.

Question 3

How to Set Up Puzzles and Solutions for Easy Puzzle Books (plugin for Powerpoint)

Accepted Answer

This tutorial shows how to set up your puzzles and solutions to create a puzzle book with Easy Puzzle Books.

Puzzles and Solutions

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/HQSKL5ABpv/Easy%20Puzzle%20Books%20-%20004%20Select%20Puzzles%20-%20Blank.jpg (Easy Puzzle Books - 004 Select Puzzles - Blank.jpg)

The screenshot shows the empty Puzzle Files window. This is what it will usually look like when you start, unless you have used a preset already.

You can click "Add Puzzles" to add puzzles, and "Add Solutions" to add solutions. Pretty easy, right?

The puzzles and solutions will be displayed in the list. Especially for the first few puzzle books, it makes sense to verify that the proper puzzles and solutions are matched.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/TozOU08WIX/Easy%20Puzzle%20Books%20-%20005%20Select%20Puzzles%20-%20Details.jpg (Easy Puzzle Books - 005 Select Puzzles - Details.jpg)

In this screenshot you can see that a number of puzzles and solutions have been selected. Each line contains < P>: showing the puzzle file name, and < S>: showing the solution file name. When you click on each line, a message box will show you the full path for the puzzle and solution.

Note: When you use presets, you'll get a warning "File Not Found", if your list of puzzle files contains files that cannot be found. For example when you've deleted the files or moved them to a different location.

For Automatic book creation, you can skip the next two paragraphs.

Titles

Select the "Titles" tab to see more information:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/nA1gAdP70G/Easy%20Puzzle%20Books%20-%20006%20Select%20Puzzles%20-%20Title%20Auto.jpg (Easy Puzzle Books - 006 Select Puzzles - Title Auto.jpg)

You can edit the Puzzle Title, Solution Title and Number Symbol here. For Automatic book creation, these settings will be identical to the settings in Step 4. For Manual book creation, this is where you should edit the settings.

In the screenshot, the lower part of the window is greyed out. This is what it looks like when you open this window from the "Auto" tab.

Placeholders for Manual Grid Creation

Please read the Manual Puzzle Books tutorial first, otherwise these settings will not make sense.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/uTw4dNJq3i/Easy%20Puzzle%20Books%20-%20007%20Select%20Puzzles%20-%20Titles%20Manual.jpg (Easy Puzzle Books - 007 Select Puzzles - Titles Manual.jpg)

For Manual Puzzle Books creation, you'll first create one or more Powerpoint slides with placeholders for the puzzles, puzzle titles, solutions and solution titles.

This will allow you to create a nice layout, changing positions, sizes, fonts, colors, etc. In the grid, you'll see (or use) names like {Puzzle Title 1}, {Solution 3}, and so on.

These codes - "Placeholders" - are needed to tell the plugin which titles and puzzles belong together. Once the copy and replace process begins, it will replace {Puzzle Title 1} with "Puzzle ##", and replace "##" with the current puzzle number.

For Easy Puzzle Books, it's not really important what these names are, as long as they not identical, and there's a number included. Therefore it's best not to change the settings.

For Mixed Puzzle Books Pro, these placeholders should be unique, to separate the different puzzle sets in your puzzle book.

Question 4

How Can I Create Books with Easy Puzzle Books (plugin for Powerpoint)?

Accepted Answer

Getting Started

This tutorial explains the steps to create puzzle books using Easy Puzzle Books (plugin for Powerpoint).

If you are using Puzzle Maker Pro, you can quickly create puzzles and puzzle books with a single mouse-click. However, there is a lot of puzzle-software available - free and commercial - that only creates the puzzles, not the books. That's where Easy Puzzle Books comes in. (It may not work properly with certain Puzzle Maker Pro puzzle types, such as Word Search or JigSaw).

Install the Plugin

First of all, you'll need to install the software: Easy Puzzle Books is a plugin for Powerpoint - it requires MS Windows and MS Powerpoint to be installed on your computer. It does not work with the cloud (browser) version of MS Office / Powerpoint.

If you haven't installed the plugin yet, you should do that first. There's a tutorial for downloading and installing the plugin here.

Start the Plugin

To start Easy Puzzle Books, open the "Add-ins" ribbon in Powerpoint (this is a menu option, usually just to the left of the Help Menu).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/c2xd7twyDJ/Add-in%20menu.jpg (Add-in menu.jpg)

The Add-ins ribbon should contain the BookPublisherTools group of options. Click "More Options" to open the dropdown menu, and select "Easy Puzzle Books".

Easy Puzzle Books - Overview

The Easy Puzzle Books plugin will open a panel at the right (just like the shape edit panel in Powerpoint). The panel has three tabs:

First things first: Page Setup

Always set up the page size first, otherwise you'll be generating grids and puzzle page in the wrong format later.

Automatic Book Generation

As you can see in the screen shots, there are 5 steps to set up and create your puzzle book:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/5Bfobqk8LA/Easy%20Puzzle%20Books%20-%20001%20Auto%20Overview.jpg (Easy Puzzle Books - 001 Auto Overview.jpg)

At the top of the tab page is a "Preset" section: You can save the entire book setup as a preset, and retrieve it later. This will NOT save the Powerpoint contents, and saving the Powerpoint file will NOT save the Easy Puzzle Books data!

Step 1: Set up the puzzles

Select puzzle and solution files on your computer for your puzzle book. Click the green button "Select Puzzles". More details can be found in the Puzzle Setup Tutorial

After selecting the puzzles and solutions, you should see the status information next to the green button.

Note: For Easy Puzzle Books it's not required to enter a name for the set of puzzles.

Step 2: Set up the Puzzles Grid

Easy Puzzle Books will use a grid-style layout for your puzzles, e.g. 1 per page, 2x2, 3x4, etc. Click the green button "Set Up Grid (Puzzles)" to set up the number of puzzles per page and the margins and padding. Details can be found in the Grid Setup Tutorial

When the grid setup for the puzzles is done, the selected grid size should be shown next to the green button.

Step 3: Set up the Solutions Grid

There are two options for the solutions grid:

It can be identical to the puzzles grid. Click the "Use Puzzles Grid" option and make sure it's checked. This is usually the best format if you want to create a solutions page right after each puzzles page;
Set up a separate grid for the solutions - for example you can have 6 puzzles on a page and 12 solutions on a page

Setting up the solutions grid is done identical to the puzzle grid.

Step 4: Set Titles for Puzzles and Solutions

The next step is setting your titles for the puzzles and solutions. This is totally up to you.

The "Number Symbol" can be changed as well - this is a placeholder in the title that will be replaced with the right puzzle or solution number, when the book is created.

Step 5: Create Puzzle Book

The final step is to create a puzzle book, using the settings specified in the previous steps.

There are two options here:

Collate - Print the puzzles first and the solutions later. if unchecked, it will print a puzzle page, then a solution page, then the next puzzle page, etc
New Powerpoint File: It's possible to create the puzzle pages in a new Powerpoint file. It will automatically copy the page setup (width and height) from the current file. Otherwise the new pages will be appended at the end of the current Powerpoint file.

Example

To show you what it can look like, this screenshot shows the setup for a sudoku puzzle book with 50 puzzles. The next screenshot shows the pages that have been generated in Powerpoint.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/6V8BnXxAlR/Easy%20Puzzle%20Books%20-%20002%20Auto%20Filled%20Overview.jpg (Easy Puzzle Books - 002 Auto Filled Overview.jpg)

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/w0H7dOeaq4/Easy%20Puzzle%20Books%20-%20003%20Powerpoint%20Example.jpg (Easy Puzzle Books - 003 Powerpoint Example.jpg)

Next steps

In many cases the automatic puzzle book creation will be just what you need. It's fast.

Once you have a configuration that works for you, with the proper grid sizes and margins, you can even save the entire setup as a preset, to use for several books. Each time you create a new book, you can load the preset, and change the puzzle and solution files.

It's possible to have many presets, for example if you publish different book sizes or different puzzle types.

Manual Puzzle Book Creation

With Easy Puzzle Books you can also customize the grids, page style, fonts, etc before filling the templates with puzzles and solutions. This is called Manual Puzzle Book Creation. You can find a tutorial here.

Question 5

Creating Templates with Journal Filler - Video Tutorial

Accepted Answer

This video shows you how to set up template slides in Powerpoint with Journal Filler

Question 6

Easy Journals Pro video tutorial

Accepted Answer

This video shows you how to quickly create low content books with Easy Journals Pro Plugin for Powerpoint

Question 7

How can I create a Puzzle Book without using the Time Saver in Puzzle Maker Pro?

Accepted Answer

Create Puzzle Books with Puzzle Maker Pro

There are several ways to create puzzle books with Puzzle Maker Pro. With 'puzzle book' we mean a PDF or Powerpoint file that can be used as an interior for KDP books, or as a printable on e.g. Etsy.

Single Puzzle Type

Single Puzzle Type in this case mean: a single format / difficulty level. For example:

Sudoku 3 star puzzles
Word Search 12x12 grid with the same word list
Mazes with the same size and settings.

Step 1: Set Puzzle Settings

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Qr3fZ8Qtmu/Puzzle%20Books%20No%20Time%20Saver%20-%20001%20Sudoku.jpg (Puzzle Books No Time Saver - 001 Sudoku.jpg)

The first step is to set the puzzle settings you want. The screenshot shows sudoku as an example. You can set the difficulty level and quantity (the number of puzzles). After that you can set the styling and the advanced options. Use preview to verify that it's to your liking.

Step 2: Set 'Book' Settings

Creating a PDF or Powerpoint file is called 'Additional Output', because the puzzle files are the primary output of Puzzle Maker Pro.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/GBLEarIzjQ/Puzzle%20Books%20No%20Time%20Saver%20-%20002%20Additional%20Output.jpg (Puzzle Books No Time Saver - 002 Additional Output.jpg)

There are several output options to choose from, in the example we selected "Create Powerpoint File". If you want, you can edit some of the custom layout settings as well.

If you don't have the Time Saver, you'll get a book with one puzzle or solution per page. If you do have the Time Saver, you can choose different page layouts for puzzle pages and solution pages.

Step 3: Create

Click "Create" - Puzzle Maker Pro will create the different puzzles for you, and automatically create a Powerpoint (or PDF) file that is the puzzle book (interior or printable).

Multiple Puzzle Types

There's a secret option to create a puzzle book with multiple puzzle types - meaning: multiple difficulty levels for Sudoku, different sizes or other options for word search or mazes, etc. Don't try to mix different puzzles, e.g. sudoku with word search, in a single book. This usually won't work correctly.

Step 1: Setup

First: Switch off the Additional Output - Make sure Powerpoint and PDF are not selected in the Additional Output area (on the Output Settings / Additional Output tab).

Second: Go to the Tools tab, and make sure the option "Clear Project Folder Before Create" is not selected.

This will make sure the files you create will be kept (and not deleted each time).

Step 2: Create Puzzles

Now you can Create puzzles in several steps. You can change sizes, difficulty levels, colors, etc. Each time you click "Create" it will add some puzzles in the puzzles folder.

The puzzle file names contain a time stamp (current date and time and a number), that will ensure that puzzles will appear in the book in the same order you create them.

Step 3: Create the Book

Before you create the book, go to the Output Settings / Puzzle Files tab and make sure "Skip Puzzle Creation" is selected. This will let you create a Powerpoint or PDF from the puzzles that have been generated earlier.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/7kKtp3hSRv/Puzzle%20Books%20No%20Time%20Saver%20-%20004%20Skip%20Puzzle%20Creation.jpg (Puzzle Books No Time Saver - 004 Skip Puzzle Creation.jpg)

Now go to the Output Settings / Additional Output and select the options you need (e.g. Powerpoint).

Click "Create" and the Powerpoint or PDF file will be generated from the existing puzzles.

Using "Save Preview"

This is identical to the "Multiple Puzzle Types" steps, except that you can use the "New Preview" - "Save Preview" buttons to create new puzzles and select the ones you want to have in your book.

So: Switch off the option "Clear Project Folder Before Create", and switch on the option "Skip Puzzle Creation".

Now add puzzles by creating new previews and saving them.

Finally click "Create" to create your Powerpoint or PDF file

Why do I need the Time Saver?

After reading this, you may ask yourself: Why would I need the (expensive) Time Saver extention?

You don't, if the steps above work for you.

The Time Saver does two things:

It saves TIME. It saves time when creating the puzzles: instead of having to go through the steps in this tutorial, you can configure the Time Saver to create a variety of puzzles.
It offers a flexible page layout system, and this will save you more TIME: When there was no Time Saver, you could copy and paste the puzzles, to create your own 2x2 or 2x3 puzzle pages. Which takes a lot of time. The Time Saver offers these options, so you get the layout you want with a single click.

The name "Time Saver" was made up by the early users of Puzzle Maker Pro, because it saves time.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/wXDJPzFqfQ/Puzzle%20Books%20No%20Time%20Saver%20-%20005%20Page%20Layout.jpg (Puzzle Books No Time Saver - 005 Page Layout.jpg)

The screen shot shows how you can flexibly set up layouts for your puzzle books. This option is only available as part of the Time Saver extensions.

Question 8

Puzzle Maker Pro - Tutorial Overview

Accepted Answer

Puzzle Maker Pro Tutorials

Welcome to the Puzzle Maker Pro - Tutorials page: This page lists the tutorials for Puzzle Maker Pro. Please use search if you don't see here what you're looking for.

Getting Started

Puzzle Maker Pro - Getting Started

Puzzle Maker Pro Tabs

Output Settings - Puzzle Files

Output Settings - Additional Output

Output Settings - Page format

Page Layout

Time Saver

Tools

Puzzle Specific Tutorials

Sudoku

Word Search

Mazes

Bingo

Word Star

Geometric Mazes

JigSaw

Connect the Dots

Generic FAQ's

Drag and Drop Images

Color and Font Selection

Mask Editor

Question 9

Getting Started with Puzzle Maker Pro

Accepted Answer

Introduction to Puzzle Maker Pro

Welcome to Puzzle Maker Pro - the world's best puzzle maker. We've tried our best to make the software as easy and intuitive to use as possible. However, because we want you to be able to create something unique to you, we still offer a lot of options.

In this tutorial we'll show you the basics. Your first puzzle (or even puzzle book) is just one click away.

Puzzle Maker Pro - Main window.

When you start Puzzle Maker Pro, you'll see a window looking a lot like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/V3P2w4AK32/Puzzle%20Maker%20Pro%20Main%20Window.jpg (Puzzle Maker Pro Main Window)

It currently shows Sudoku, but if you purchased a different puzzle, it'll show that instead.

Puzzle Maker Pro is a framework for puzzle modules - some parts will be different for each puzzle, other parts are standard options available to all puzzles.

Let's start the tour:

Preview

Now go on and press preview, maybe change some of the settings, colors or numbers, and see what happens when you click preview again.

To find out where your puzzle files are saved, continue to Output Settings. For all other topics, go back to Tutorial Overview

Question 10

How can I quickly set up lines, squares or dots for my journal using Journal Filler Plugin for Powerpoint?

Accepted Answer

This tutorial will show you how to quickly fill a shape in Powerpoint with lines, dots or squares.

As you know, each 'page' in Powerpoint is called a slide. That's the terminology we will use in this tutorial.

Overview

The Journal Filler Plugin for Powerpoint will save you time with two different options:

To use the Journal Filler Plugin, click on the "Add-ins" option in the Powerpoint menu. This will open the Add-in ribbon, that includes the "BookPublisherTools" options. In the "More Options" menu you can find "Journal Filler". This will open a new side panel in Powerpoint.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/c2xd7twyDJ/Add-in%20menu.jpg (Add-in menu.jpg)

Add lines to a shape with Journal Filler

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/qDKcXOE391/Filler-Lines.jpg (Filler-Lines.jpg)

Adding lines, squares, dots or little plusses to shapes is straightforward:

First, make sure you're looking at the "Lines" tab in Journal Filler.

Choose the fill option you need:

Horizontal lines
Vertical lines
Both (horizontal and vertical lines), resulting in squares or rectangles
Dots
Plusses

Depending on your selection, you'll need to set the Vertical and/or the Horizontal distance between the lines or dots. You can choose to either:

Set a fixed distance between the lines or dots (in inches)
Set the number of lines you want, e.g. 5 lines. The plugin will calculate the line distance for you when you click 'Go'

There are some presets for the line distance, such as medium ruled, wide ruled, 5 per inch, etc.

Once you're done, select one or more shapes that need to be filled, and click "Go".