Question 1

How can I quickly set up a layout with the Journal Filler Plugin for Powerpoint?

Accepted Answer

This tutorial shows you how to quickly create a tight layout in Powerpoint using the Journal Filler Plugin for Powerpoint.

As you know, each 'page' in Powerpoint is called a slide. That's the terminology we will use in this tutorial.

Overview

The Journal Filler Plugin for Powerpoint will save you time with two different options:

Quickly fill a shape with lines, squares or dots (see: Lines, squares or dots)
Add new shapes to set up a layout quickly (this tutorial)

To use the Journal Filler Plugin, click on the "Add-ins" option in the Powerpoint menu. This will open the Add-in ribbon, that includes the "BookPublisherTools" options. In the "More Options" menu you can find "Journal Filler". This will open a new side panel in Powerpoint.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/c2xd7twyDJ/Add-in%20menu.jpg (Add-in menu.jpg)

There are two ways to add new shapes on a slide (or on several slides)

Add shapes on a blank slide - this will create new shapes with black/white colors only
Set up a shape on your page, and use that as a template for new shapes.

Add shapes on a blank slide

An easy way to get started with your journal or planner layout, is by adding a basic layout on a blank slide. With a blank slide we mean a slide that does not yet contain any shapes or other things.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/UUTYtulvDt/006%20Empty%20Blank%20Slide.jpg (006 Empty Blank Slide.jpg)

As you can see in the screenshot, we've used Easy Journals to set up an 8.5"x11" page layout, and to add guides for the 0.5" margins. (These guides are not required for Journal Filler.)

At the right you see the Journal Filler plugin, where the "Shapes" tab is selected. Here you can:

Set outer margins, that you don't want covered with shapes. You can set this to 0 (zero), to 0.5" for KDP margins, or to larger sizes to create a specific layout. For example to keep the top half of the page empty.
Set Interior Margins, the margins between your shapes. You can specify the horizontal distance between columns, and the vertical distance between rows
Set the number of rows and columns.

In the example we create 3 columns x 3 rows, with 0.1" margin between the rows and columns, and 0.5" margins on the outer borders. This will result in a new layout like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/qtC7QP8VC6/007%203x3%20for%20Blank%20Slide.jpg (007 3x3 for Blank Slide.jpg)

When you create shapes on a blank slide, the shape fill color is white, the border line will be black, and the font color is black as well.

You can also use custom colors and font settings for your shapes, by starting from a 'template' shape:

#Add shapes from a 'template' shape

Or... you may want to use specific color settings - a rose gold background with a purple script font and green borders.

Journal Filler will let you replicate (copy) the shape you create with the exact same settings.

Step 1 - Set up the shape format, position and size

First you add a shape to your slide. For journals and planners you'll probably use squares, but you can use stars, arrows, etc as well.

You can change the colors, font style and font color as you wish. In the screenshot below we just used a white background with black borders:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/chogcVIhdF/Filler-Squares.jpg (Filler-Squares.jpg)

To be honest, these four squares have been created from a larger square.

Step 2 - Set up the number of shapes you want

Journal Filler will create the specified number of shapes in the place of the selected shape. If you set the number of rows and columns both to 2, you will end up with 4 shapes, each approximately 50% of the height and width of the original shape. (It will apply the Interior Margins you set).

Step 3 - Add the new shapes

Now you can select the shapes you want to use as templates (1 or more) and click "Add" to add the new shapes.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/BuZqZa6IpQ/Filler-Smaller-Squares.jpg (Filler-Smaller-Squares.jpg)

In this screenshot you can see the result after:

Selecting the top left and bottom right squares, and selecting 1 column and 2 rows, then clicking 'Add'
Selecting the top right and bottom left squares, and selecting 2 columns and 1 rows, then clicking 'Add'

Using Ctrl-Z you can undo all the changes made by the plugin.

Step 4 - Customize and embellish

After you've created this basic layout, you can manually change, resize and edit the shapes any way you want. These are 'just' Powerpoint shapes.

Question 2

How Do I Install the Powerpoint Plugins?

Accepted Answer

Here's a generic step by step guide to install Powerpoint plugins.

#1 Download the file

The first step is to download the Plugin file and save it on your computer. Usually that's as simple as clicking the download link. You can find this on the download page that has been emailed to you, or in the member area if you are using a paid plugin.

After this you should have a file named BPT-Easy-Journals.zip, possibly including a version number, in the Downloads folder on your computer.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/BWgLerx0Mc/Plugin%20Install%20001%20-%20Zip%20File.jpg (Plugin Install 001 - Zip File.jpg)

#2 Extract the files

The next step is to extract the files from the zip file, or 'unzip' the file. You can do this by right-clicking the filename and then select "Extract Here" or "Extract To".

Warning: Do not just double click the filename. This will let you browse the contents (that's fine) without unpacking it. You cannot install the plugin unless the files have been extracted from the zip file.

In the screenshot below you can see the result of "Extract Here" - The zip file contains a folder "BPT-Easy-Journals" that will be created on your computer.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/2YHUR1GoPg/Plugin%20Install%20002%20-%20Folder.jpg (Plugin Install 002 - Folder.jpg)

#3 Find the Files

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/LAOOSDHeG2/Plugin%20Install%20003%20-%20Files.jpg (Plugin Install 003 - Files.jpg)

#4 Start the Setup

Warning: You'll need to keep this folder in the same place, otherwise Powerpoint won't be able to find the plugin files later.

Powerpoint will show you a confirmation message:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/vZACmHpdXP/Plugin%20Install%20004%20-%20Confirmation.jpg (Plugin Install 004 - Confirmation.jpg)

It will say "Publisher: Core Insights". That's the registered company name of BookPublisherTools.

After this step you can use the plugin in Powerpoint, as described in other tutorials.

#5 Troubleshooting

In 99% of the cases, the installation will work properly. However, if you find it doesn't work, here are the solutions to the most common problems.

Certificate not trusted

The software certificate is comparable to the certificates used on websites for https (the secure internet protocol). It is used to 'sign' the sofware and ensure that it has not been tampered with.

There are two reasons why this error may occur:

Depending on the Windows settings on your computer, you may need to manually save the certificate, before installing the plugin (or other BookPublisherTools software). You can find a guide here.
The certificate may have expired. This is not a problem for plugins that have already been installed, but it will be checked when you install a new plugin. This can be solved by downloading the newest version of the plugin. If that doesn't fix it, contact us.

Other errors

There have been a few other types of errors, all of which have been fixed by re-downloading or re-installing the plugin. If that doesn't work, please contact us.

Question 3

How do I create journals with Easy Journals?

Accepted Answer

Easy Journals

Easy Journals is a plugin for Powerpoint - it requires MS Windows and MS Powerpoint to be installed on your computer. It doesn't work with the cloud version of MS Office / Powerpoint.

If you haven't installed the plugin yet, you should do that first. There's a tutorial for downloading and installing the plugin here.

Applications

This plugin doesn't just create journals, you can use it for many other mix and merge applications, such as simple memes that consist of a text quote and a background image. Wherever you see 'journal' in this tutorial, you can replace it other products if that works better for you.

If you create journals, you could create a guided journal, or a journal with writing prompts, by setting up a text file with the text for each page and then use the plugin. If you want a small illustration at the top or bottom of each page, that's different on each page, you can select the list of images as well, before using the plugin.

You can even create coloring books this way, by adding a (large) placeholder for images on each page, and then use the plugin. This way all the images will be placed at the exact same location. (However, if the dimensions of the images are different, they may appear stretched).

It's very easy to do a test run, although it's best to use a limited text file (just 2 or 3 words or phrases). That way you can see the results, and use Ctrl-Z to quickly remove the new slides. (Using the plugin counts as a single action for Powerpoint, so you only need to press Ctrl-Z once, even if you have 100's of new slides).

Using Text and/or Images

With Easy Journals you can use text and/or images to quickly generate a journal.

You can use text, images, or both. The plugin will copy your 'template' slide, and replace the placeholders with words from your text file and/or images from the list of images you selected.

Click "Text File" to select the text file you want to use. This file should contain each word (or phrase) on a separate line.

You can choose the codes that need to be replaced. By default these are set to "{TEXT}" and "{IMAGE}". You can use all the Powerpoint styling options for the text, these will be applied to the new text as well. Images will be added as a 'fill' for the shape containing the code "{IMAGE}".

This screenshot illustrates how it works. Please don't be offended by the lack of content and styling, it's just showing the mechanics.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/hF6GHM1xIL/EJ%20001%20placeholder%20codes.jpg (EJ 001 placeholder codes.jpg)

The green arrows show how the codes are configured and added to the page.

The red arrows show how to set the content that will replace the codes.

After using the plugin (click "Go") the output could look like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/REWnkc1Zr1/EJ%20002%20Rendered%20page.jpg (EJ 002 Rendered page.jpg)

Reminder: You will need to remove the template slide before uploading your journal to KDP or Etsy.

Page Setup with Easy Journals

There's one other (free) feature in Easy Journals: You can quickly set up the page format you need and add guides to indicate the margins.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Ta2wJYpIXu/EJ%20003%20Page%20Setup.jpg (EJ 003 Page Setup.jpg)

Using the button 'Get Current' it will retrieve the current settings from Powerpoint. These will be translated from the internal Powerpoint format (72 points per inch) to inches.

You can change the format to e.g. 8.5" by 11". Once you click "Set", the page (slide) format will be changed.

Powerpoint does not work with margins, because it's an app to create presentations, not books. However, you can easily use guides to help you out here: Just set the margins the way you want to and click "Add Guides". This will add four red guides - top, bottom, left, right.

It will also remove other red guides: Because the plugin doesn't know which guides were set as 'margins', it uses the color red for this purpose. Guides in other colors will not be affected.

Question 4

How do I use the Colors options for Puzzle Maker Pro - Geometric Mazes?

Accepted Answer

This overview explains the different Colors options for Puzzle Maker Pro - Geometric Mazes.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/61ZncrdL5X/30%20Mazes%202D%20-%20Overview.png (30 Mazes 2D - Overview.png)

There are two different sets of options on the Colors tab:

Colors for the canvas, floors, walls and solution
Settings for the Start and End points.

Color Settings

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Yrs6RV7i10/31%20Mazes%202D%20-%20Transparent%20Canvas.png (31 Mazes 2D - Transparent Canvas.png)

Canvas

The canvas is the background of the image, on which the maze will be drawn. For square or rectangular mazes this won't be visible. For other shape types, and with (future) add-ons like the Masks and the Crossings, it will have a major impact on your maze.

To create a Transparent canvas, as shown in the screenshot, you will need to select Transparent PNG is the file type (Output Settings --> Puzzle Files --> Puzzle Output Format). Otherwise the transparent background will be shown as black.

Floors

The floors, the contents of each cell in the maze, can be any color, or you can make them transparent. In which case the canvas color will be shown instead.

There is no limit to color combinations you can use. An example is the screenshot below, using black for the floors and white for the walls:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/0fOczbSr6x/32%20Mazes%202D%20-%20Reverse%20Colors.png (32 Mazes 2D - Reverse Colors.png)

Walls and Solution Path

The colors for the Walls and the Solution Path can also be set to any color. Depending on the colors you use, you may need to adjust the Wall Thickness or Solution Line Thickness on the Style tab.

Start / End Point Settings

In Puzzle Maker Pro - Geometric Mazes you can fully customize the Start and End point indicators. By default these will be printed as Text ("S" for Start, "E" for End) in black, using the Arial Font style. You can change the font by clicking the font preview panel (which shows "Arial" in the screenshot below, or by clicking the small looking glass on top of the panel).

Outside Passage Open

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/TYNEdjuza9/33%20Mazes%202D%20-%20Start%20End%20Points.png (33 Mazes 2D - Start End Points.png)

You can set the "Outside Passage Open" to enable make it possible to actually enter and leave the maze.

Using Images

You can also use images instead of text, to indicate the Start and End points for the maze.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/vcbdxwYKcP/34%20Mazes%202D%20-%20Start%20End%20Images.png (34 Mazes 2D - Start End Images.png)

First click the option "Images". This will display the two white panels where you can select the images you want to use. You can either click each panel and select an image (on your computer), or drag and drop an image onto the panel. (You can also drag and drop two images at once, dropping them on the left panel).

You can use images for any shape type, here's an example of a hexagons maze with the same images:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/nJc1FBSaeB/35%20Mazes%202D%20-%20Hex%20Start%20End%20Images.png (35 Mazes 2D - Hex Start End Images.png)

Passage Settings

By default the passages are fully open. However, you can change that. Use the slider to set the passage to a percentage of the cell size. (A percentage instead of a fixed number of pixels will preserve settings when you use a different image size or resolution).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/kI3Ss9XXLE/21%20Mazes%202D%20-%20Passage%20Width.png (21 Mazes 2D - Passage Width.png)

By setting the Passage Width to approx 50% you get a different type of maze, it will seem to be more complex, even though it has the same number of cells as the first screenshot on this page.

Using very small values for Passage Width may interfere with the Wall Thickness and Colors settings - in some cases the passage will be drawn as closed because the walls are too thick. Always check the results of your settings visually before creating a large number of mazes.

Randomize Passage Position

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/B9kHdIV5Ca/22%20Mazes%202D%20-%20Randomize%20Passage%20Position.png (22 Mazes 2D - Randomize Passage Position.png)

As you can see in the screenshot, randomizing the passage position will move it slightly to the left or right, creating a more complex maze. This option will have no effect when the passages are fully open.

Randomize Passage Width and Position

Randomizing the Passage Width will randomly add or subtract up to 50% of the Passage Width, creating a more chaotic maze.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/gIo9ImI8LV/23%20Mazes%202D%20-%20Randomize%20Passage%20Width%20and%20Position.png (23 Mazes 2D - Randomize Passage Width and Position.png)

In the screenshot we've randomized both the Width and the Position, you can also randomize either of them separately.

Wall Settings

The Wall Thickness has a huge impact on the look and feel of a maze, even without changing the colors.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/0wAIJpwJCd/24%20Mazes%202D%20-%20Wall%20Thickness.png (24 Mazes 2D - Wall Thickness.png)

Just like the Passage Width, the Wall Thickness is also set as a percentage of the cell size.

Randomize Wall Thickness

You can randomize the Wall Thickness, this add or subtract up to 50% of the Wall Thickness. This will make it look quite chaotic.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/CWMYcjulwL/25%20Mazes%202D%20-%20Random%20Wall%20Thickness.png (25 Mazes 2D - Random Wall Thickness.png)

The randomization will be done on a cell by cell basis. This means that all walls of a cell will have the same weight (thickness), unless a neighboring cell has even thicker walls. You can see in the screenshot that this results in an organic look and feel of the maze.

If you use a low value for the Wall Thickness, combined with randomization, the result may look a bit like a hand-drawn maze.

Solution Line Settings

The Solution Line is the line through the maze that connects the Start and End points.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/P43YQOdQ6J/26%20Mazes%202D%20-%20Solution%20Line.png (26 Mazes 2D - Solution Line.png)

First of all, you can change the width (weight, thickness), again as a percentage of the average cell size.

Curved Solution Path

If you don't like the more angular style of the default solution line, you can change it to Curved:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/xCmQ9kZMIl/27%20Mazes%20-%20Solution%20Line%20Curved.png (27 Mazes - Solution Line Curved.png)

Curved solution paths look more smooth and natural, the way someone would manually draw the path in a maze.

Dashed Solution Path

Finally you can change the continuous line into a dashed (dotted) path:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/xifqUhEviK/28%20Mazes%202D%20-%20Solution%20Line%20Curved%20Dotted.png (28 Mazes 2D - Solution Line Curved Dotted.png)

This will make it look more like footsteps or breadcrumbs in your maze.

Warning

Especially at more extreme settings (small passage width, large wall thickness, large solution line thickness, and randomization) you'll have to really visually check if the mazes look good, using the colors you selected. There are many customization options allowing you to create beautiful mazes, but they will also allow you to create mazes that are less esthetically pleasing.

Question 6

How do I use the different Maze Generator options for Puzzle Maker Pro - Geometric Mazes?

Accepted Answer

This overview will explain the different Maze Generator options. These options are available in every module of Puzzle Maker Pro - Mazes.

Mazes are always constructed completely random. However, there two ways to control the randomness:

Controlling the algorithm
Controlling the type of path

##Controlling the algorithm

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/EA389U4UK4/10%20Mazes%202D%20-%20Path%20Complexity.png (10 Mazes 2D - Path Complexity.png)

Puzzle Maker Pro - Geometric Mazes contains a combination of different algorithms (rules) to create the maze. It's always random, but some algorithms create longer, meandering paths, while other algorithms create more direct paths.

In the screen shot you can see the slider for "Solution Complexity". When you slide it to the left, it will create straightforward paths, when you slide it to the right, the paths will be more complex. However, it's always random.

Controlling the type of path

In addition to the maze generator algorithm, you can also choose how you want the path to run through the maze, by setting the start and end points. By default it runs from top left to bottom right, or in the case of circles, from top to bottom.

Random Path

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/r8Le03N96R/11%20Mazes%202D%20-%20Solution%20Path%20Style%20Random.png (11 Mazes 2D - Solution Path Style Random.png)

The "Random" Path option will randomly set the start and end points at opposite sides of the maze, as can be seen in the screenshot.

Longest Path

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1mUrVzte4o/12%20Mazes%202D%20-%20Longest%20Path.png (12 Mazes 2D - Longest Path.png)

The "Longest Path" option will look over the generated maze, and find two points that have the longest distance to each other (the highest number of intermediate cells to pass), and choose them as start and end points. In most cases the start and end points will be somewhere in the middle of the maze.

Differences between Standard Mazes 2D and Geometric Mazes

There are currently multiple 2D mazes products in the product list in Puzzle Maker Pro. These include: Standard Mazes 2D and Geometric Mazes. These modules use different algorithms to create the puzzles. While Geometric Mazes has some unique options (and will be getting additional add-on options), the Standard Mazes 2D product is more suitable for large mazes (100+ rows and columns) and is faster for batch creating lots of mazes.

There's also a difference in the 'random wall thickness' option: Standard Mazes 2D randomizes for each wall, while Geometric Mazes will randomize for each cell, resulting in different, more natural looking patterns.

(Future) Add-on's for Geometric Mazes

Currently several future add-ons are planned:

Rooms and Crossings (Rooms are larger cells in a grid, only available for Squares. Crossings will be available for Squares, Triangles and Hexagons)
Breadcrumbs (text - words or phrases, or images, to add an additional challenge to the mazes)

Question 8

How to Get Started with Puzzle Maker Pro - Geometric Mazes

Accepted Answer

This tutorial will show you how to get started with Puzzle Maker Pro - Geometric Mazes.

When you select the Geometric Mazes module in Puzzle Maker Pro (1), you'll see a window similar to this screenshot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/WHaX9pO8oC/01%20Mazes%202D%20-%20Initial%20View.png (01 Mazes 2D - Initial View (2).png)

In this window you can:

Set the type of maze you want, and set the size for your maze (2),
Configure how your maze will be generated (4),
Set additional Maze properties such as style and Colors (3)
Use future add-ons for Geometric Mazes (3)
And finally - Create or Preview your maze (5).

Different shape types

Puzzle Maker Pro - Geometric Mazes offers 4 different shape types, which are enabled depending on your license. (Read more about Geometric Mazes licenses here).

Squares

Mazes with squares are the most easy to understand: You can set the number of rows and the number of columns for the total maze grid, and the software will generate a nice meandering path using some of these squares. An example is the screenshot at the top of this page.

Triangles

Triangles mazes are made up from triangles, alternatingly pointing up and down. A triangle based maze can never be fully square in size (unless you do some advanced math).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/qW45nPAk0J/03%20Mazes%202D%20-%20Triangles.png (03 Mazes 2D - Triangles.png)

You can see in this image that a triangles maze with 20x20 triangles is not exactly rectangular.

Circle

A circle maze consist of several concentric circles. The number of maze 'cells' in each larger circle will be larger than the smaller circles, to make sure all the cells are more or less the same size.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/aJ5l2Ta3DI/02%20Mazes%202D%20-%20Circle.png (02 Mazes 2D - Circle.png)

The number of rows and columns for circle mazes have a special logic:

Rows: The number of rings you encounter when you count from top to bottom or left to right. This setting is actually double the number of circles that are drawn.
Columns: This is the number of parts of the center circle, which can have a value ranging from 3 to 10. (This is a UNIQUE feature that you won't find in any other maze software). 4 or 6 are great values to work with, but you can experiment with the other numbers.

Hexagons

Hexagons are shapes with 6 sides. An example can be seen in this screenshot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/iClafwvPIm/04%20Mazes%202D%20-%20Hexagons.png (04 Mazes 2D - Hexagons.png)

The number of columns that are drawn for hexagons will always be odd, to add corner shapes for bether esthetics.

Links to tutorials to configure all the different settings for Geometric Mazes can be found at the bottom of this page.

Save and Preview

For new Puzzle Maker Pro users:

At the bottom of the window, you can see three buttons and an option (checkbox)

"Create" will create new mazes. This will use the quantity setting (Basic Options, at the top of the Puzzle Settings tab), to create 1, 2, 5 up to 1000's of maze puzzles. Each puzzle consists of a puzzle image and a solution image. WARNING: for large puzzle sizes (70-100) this may take a while for each puzzle.
"Next Preview" will generate a new maze that is shown in the preview panel (the big maze image at the right side of the Puzzle Maker Pro window). This is not saved to disk, but is an easy and interactive way to play with the settings and see what happens.
"Save Preview" will save the current preview.
"Preview Solution" can be used to toggle the preview panel from solution to puzzle. For mazes it's usually convenient to preview the solution (otherwise you won't see the solution path).

Creating Puzzles

You always start off with a blank screen. If you've activated your software (Instructions for this appear are sent in an email automatically upon purchase), you can start making your own puzzles.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/DiiQYZeann/Nonogram%20starting%20screen.jpg (Nonogram starting screen)

The starting screen

You can select a file with the "Select File" button, and a preview of the puzzle/solution will be shown in the panel at the right. The original image is shown at the left. (The actual puzzle isn't shown, since this resembles the solution, but without the black squares.)

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/dsUqnwedEQ/Nonogram%20Puzzle%20selected.jpg (Nonogram Puzzle selected)

We have selected a picture of a puppy

There are several ways to further customise and finetune the puzzle:

Select the Puzzle Format. There are further options for Small or Large, that will impact the final size of the puzzle.
You can choose where the hints are shown. Top/Left is automatically selected, if you deselect this the hints will go bottom/right.
You can add a separator. This will appear between the numbers on the left, to make the guide easier to read.
You can choose to show zeroes. If you uncheck this box, the rows without any solution will not have any numbers.
Remove Padding. This will remove all empty rows, and redraw the puzzle. If you have a puzzle with a large amount of white space on the edges, this could make more detail show up in the puzzle. However, this option can also change the amount of rows and columns that appear in the puzzle. For further information on how to avoid this, you can look up our Advanced Nonogram Editing tutorial.

We have used several of these options, which leaves us with this puzzle for now.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/uLKz4TkItx/Nonogram%20Basic%20result.jpg (Nonogram Basic result)

For further tutorials, you can check out:

Question 10

How can I create Circle JigSaw Puzzles?

Accepted Answer

Puzzle Maker Pro - JigSaw Circles supports most of the features of JigSaw Squares, and most tutorials for squares apply for circles as well. Some things are different though, and we will discuss those in this tutorial.

Circles

First of all, the JigSaw Circles will only create a circular puzzle. It will not fill out the empty space along the borders of your image. This means a significant part of your image will be cut off - it makes sense to prepare images that have the actual image centered.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/sOnRU71cz1/Jigsaw%20025%20-%20Blank%20Circles%20Puzzle.png (Jigsaw 025 - Blank Circles Puzzle.png)

Number of concentric circles

Instead of changing the amount of rows and columns, you only get one choice here: The amount of concentric circles that will be in the image. We personally recommend 2-4 circles for the best result. If you go much larger, the printed pieces will become much smaller, and it will be hard to tell the pieces apart.

Circles and Ovals

The option "Perfect Circle" will enforce the resulting puzzle to be an actual circle. If you don't have this selected, and your picture isn't a perfect square, the puzzle will instead come out as an oval.

This can be used in some cases, but the pieces will become more easily recognisable by shape, and the end result may not be aesthetically pleasing in all cases. Puzzle Maker Pro - JigSaw Circles has not been optimized for extreme differences. The screenshot below illustrates the effects of using an oval where the height and width differ a lot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/27rrCZUA1M/Jigsaw%20036%20-%20Circles%20-%20Oval%20Shapes.png (Jigsaw 036 - Circles - Oval Shapes.png)

In addition to this effect, the puzzle page (showing the separate puzzle pieces) may show overlapping pieces, because the sizes of the pieces differ too much.