Question 1

Getting Started with Sticker Factory (Plugin for Powerpoint)

Accepted Answer

Getting Started with Sticker Factory (Plugin for Powerpoint)

With Sticker Factory you can save your the shapes (or groups) on your slide(s) as separate PNG images in 96DPI or 300DPI. With Sticker Factory Pro you can also automatically add the sticker borders and even create additional slides with sticker shapes.

If you haven't installed the plugin yet, please do that first. You can find a tutorial on how to install our Powerpoint Add-ins here. Sticker Factory and Sticker Factory Pro are included in the Easy Journals download.

Sticker Factory - Saving shapes as stickers.

The standard version of Sticker Factory can save your shapes as separate PNG files. By default it uses 96DPI, but you can add 300DPI as well.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/l0ZcaiFTc2/Sticker%20Factory%2001%20Save%20Stickers.jpg (Sticker Factory 01 Save Stickers.jpg)

The screenshot shows a number of different shapes, just to illustrate how the plugin works. A regular square (top middle), a merged shape (top right), a frame (top left), a grouped shape (bottom left), Word Art text (bottom middle) and a regular text field (bottom right).

After setting the Target Folder and selecting 300DPI, the exported files will look like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/x48VfhGLj8/Sticker%20Factory%2002%20-%20Exported%20Stickers.jpg (Sticker Factory 02 - Exported Stickers.jpg)

This screenshot was taken from File Explorer, you can see the very light blue color where the PNG's are transparent, and a white border around the shapes.

Note: The basic version of the plugin will not add these white borders for you.

For convenience there's also a button to open the folder that contains the images.

Sticker Factory Pro

The Pro version of Sticker Factory can add sticker borders to your images, and generate new slides filled with stickers.

Sticker Factory Pro - Sticker Border

To add Sticker Borders, you can select the color and the border width (in Powerpoint dot size). Normally the color should be white. However, if you want to select the right border width for your stickers, you'll probably want to use a different color (if you have a white background), and change it to white once you're satisfied with the border width. For that reason we've selected purple in this example:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/8kTJIWqDjO/Sticker%20Factory%2003%20-%20Add%20Border.jpg (Sticker Factory 03 - Add Border.jpg)

The purple color (1) is added to all the shapes on this slide. When you look carefully, you should see that the original shape borders (green in shape (2), dark blue in shape (3) and dark orange in shape (4)) are still there, just as you would expect.

If you want to have different border sizes for different shapes (e.g. the border for the Regular Text Field may be a bit much), you can move them to different slides and use different settings.

With "Remove Borders" you can remove the borders you just added. If you create borders again with different settings, the existing borders will also be removed.

Sticker Factory Pro - Generate Stickers

The other feature of Sticker Factory Pro is the ability to generate stickers. For example if you have some nice shapes that you want to use for stickers with different words.

This option will duplicate the current or selected slide(s) and replace replace each (dummy) text with a word from the list. Shapes that have no dummy (or placeholder) text, will not be affected.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Hz54ezrYqQ/Sticker%20Factory%2004%20-%20Template%20Setup.jpg (Sticker Factory 04 - Template Setup.jpg)

In the screenshot you can see the list of words (phrases) and the sticker templates. After clicking "Go", it will generate additional slides as can be seen in the next screenshot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/pZTnDWdLUr/Sticker%20Factory%2004%20-%20Generated%20Result.jpg (Sticker Factory 04 - Generated Result.jpg)

As you can see here, the shapes without text are not affected. Text settings such as font size or alignment are also not changed.

To get the best results:

Add borders before generating multiple slides
Check if your longest words or phrases fit inside the shapes. Sticker Factory does not change the font settings. (e.g. the star inside the frame will not work with longer words or phrases)
Check alignment - e.g. the word art shape would look better when centered instead of left aligned.
Remove empty shapes from the template. They may not be in the way here (on the slide), but they'll result in duplicate exports (because they're the same on each slide).

Question 2

Height Map Editor for Mazes 3D Isometric (Video)

Accepted Answer

The video gives a quick overview of the Height Map Editor for Mazes 3D Isometric.

You can find more tutorials on the Mazes 3D Isometric tutorials page. Video tutorials can be found in the Mazes 3D Isometric Playlist.

Question 3

Height Map Editor Tutorial - Quick Overview

Accepted Answer

The Height Map Editor is an interactive tool to create your own 3D landscape. You can raise and lower individual squares (blocks) and level entire rows and columns.

There is one basic rule for the height of the cells: cells in front have to be lower than cells in the back. (Otherwise there would be a path on the back of the cell, which is not visible).

The Height Map Editor always applies this rule automatically, which may cause some unexpected results when you’re changing the height of some cells. That’s why there’s an Undo option, so you can always go back to the previous version of the height map.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/s49dpbE6ax/Height%20Map%20Editor%20Screenshot.jpg (Height Map Editor Screenshot)

In the screenshot you can see:

You can save the height map as a preset for later use.

You can find more tutorials on the Mazes 3D Isometric tutorials page. Video tutorials can be found in the Mazes 3D Isometric Playlist.

Question 4

How can I add those little Monthly Tables in Ultimate Planner Maker

Accepted Answer

This video demonstrates how you can add those little Monthly Tables to your page. Two or three small monthly tables in the header or footer of your page, to quickly see future dates when planning meetings and appointments.

Question 5

How Can I Change the Connectors for Puzzle Maker Pro - Jigsaw puzzles?

Accepted Answer

In this tutorial we'll show you how to change the connectors in Puzzle Maker Pro - Jigsaw. The techniques in this tutorial apply for every version of Jigsaw.

We use the word "Connectors" for the little pieces / hooks that connect the jigsaw puzzle pieces.

In Puzzle Maker Pro, you can choose between several Connector types. The style you want depends on the purpose of your puzzles:

For copy / draw puzzles, where kids have to draw the puzzle pieces in the right locations, the style differs depending on age group. You can even add printed coordinates to each puzzle pieces to make the puzzles a bit easier - or to create practice material to learn working with coordinates.
For cut-out puzzles, where your customer (or your kids) can cut out the different pieces to solve the puzzle as an actual jigsaw puzzle, it makes sense to use no connectors, or square / triangle connectors, to make the pieces easy to cut out.
Certain other types of puzzles can be created by using no connectors at all.

Connector Types

No Connectors

Puzzles no connectors are easiest to cut out. You won't be distracted by the connectors, but the image has to be clear enough to solve a puzzle without additional clues. You also won't get any clues as to which pieces are sides or corners. If you or your customers are people who tend to start with the edges of a puzzle, this may not be the best connector type for you.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/FD92o6fKDW/Jigsaw%20007%20-%20Square%20Connectors.png (Jigsaw 007 - Square Connectors.png)

Additionally you can display the coordinates and/or a number of clues for the puzzle, as shown in this screenshot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/nqigYYDS5D/Jigsaw%20008%20-%20Square%20Connectors%20and%20Coordinates.png (Jigsaw 008 - Square Connectors and Coordinates.png)

Note: You can see difference in sizing for the puzzle grid and the puzzle pieces in these screenshots, because the coordinates require space as well.

Square Connectors

The standard setting when you open the program. Because of this, most examples and tutorials use Square Connectors:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/M456z7oFcV/Jigsaw%20002%20-%20First%20Preview%20-%20Solution.png (Jigsaw 002 - First Preview - Solution.png)

These are easy to cut out, and add the much-needed help for difficult puzzles. You can also see what pieces go near the edges.

Triangle Connectors

The following screenshot shows what Triangle Connectors look like:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ZWC6eu9y6j/Jigsaw%20009%20-%20Triangle%20Connectors.png (Jigsaw 009 - Triangle Connectors (1).png)

Much like square connectors, these are easier to cut out than the jigsaw connectors.

JigSaw Connectors

JigSaw Connectors are curved connectors that make your puzzle look like real jigsaw puzzles.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/WKMQgbx0MG/Jigsaw%20010%20-%20JigSaw%20Connectors.png (Jigsaw 010 - JigSaw Connectors.png)

As you can see, these would be hard to cut out, but for copy / draw puzzles they look quite nice. Or if you have a cricut or similar, you could even cut these out properly to create a real jigsaw.

Other Connector Options

Connector Length

The Connector Length determines how much the connector sticks out from the edge of the puzzle piece. This is a percentage of the puzzle piece size: 0.25% is 1/4 of the size of the puzzle piece. Horizontal connector length is derived from the puzzle width, vertical connector length is derived from the puzzle height. The following screenshot illustrates this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/0k1yXbN2bp/Jigsaw%20011%20-%20Connector%20Length.png (Jigsaw 011 - Connector Length.png)

In the example we used a fixed size for the length. You can also choose to use a randomly varied length. To do this, you can set the minimum and maximum length for the connector.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/CyHZijeErN/Jigsaw%20012%20-%20Connector%20Length%20Random.png (Jigsaw 012 - Connector Length Random.png)

You can see in this screenshot that the lengths of the connectors vary greatly. You may notice that the smaller lengths also have smaller widths...

Connector Width

By default the Connector Width is equal to the Connector Length. In some cases you may want to use a fixed width - in that case you can set it to "Max". That will use the maximum width for all connectors, regardless of the length.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/LgkwjsvaZV/Jigsaw%20013%20-%20Connector%20Width%20Max.png (Jigsaw 013 - Connector Width Max.png)

Connector Position

The final option for the connectors is the Connector Position. By default the connectors are placed exactly in the middle of the side. The amount you enter here (up to 25%) defines the maximum random adjustment away from the center. This creates a more organic look, and extra hints for where the pieces go. Just like real puzzles, you can now also tell from the location and shape of the connector where a piece goes.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1MEmNJMUju/Jigsaw%20014%20-%20Connector%20Position.png (Jigsaw 014 - Connector Position.png)

Perfect Squares / Triangles

Depending on your taste or your customer's preferences, you may want to create puzzles with squares (where each side has the same length) or rectangles.

The default setting is to use a square, an equilateral triangle, or a circle. The total height of the image will be divided by the number of rows, and this will determine the number of columns. This may cut off the sides of the image. It may also cause white bars on the sides of the image, depending on the puzzle shape you use.

Imperfect Squares / Triangles

When you uncheck the "Perfect" option, you can set both the number of rows and the number of columns.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/s6YLNqwZVb/Jigsaw%20004%20-%20Rows%20and%20Columns%20-%20Solution.png (Jigsaw 004 - Rows and Columns - Solution.png)

Setting the number of rows to 5 and the number of columns to 8 results in rectangular puzzle pieces, as you can see in the image.

The image below shows what this would look like on the page:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JEOLW67NyA/Jigsaw%20005%20-%20Rows%20and%20Columns%20-%20Puzzle.png (Jigsaw 005 - Rows and Columns - Puzzle.png)

In this image, the puzzle pieces are also printed in a 8 by 5 grid. This is a coincidence, and depends on the puzzle size and format. Puzzle Maker Pro - Jigsaw will always try to print all the parts as large as possible.

Another example:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/NGdBlN0au5/Jigsaw%20006%20-%20Rows%20and%20Columns%20-%20Alternative.png (Jigsaw 006 - Rows and Columns - Alternative.png)

Here the difference is less extreme, but they still are not perfectly square.

Use Default Page Setup Settings

By default, this module will use the Trim Size and Margin settings that you can configure at the "Output Settings / Page Format" tab.

If you use a Trim Size of 8 x 10" and 0.5" Margins on each side, there will be a 'body' area left that is 7 x 9". This will be the size for the Puzzle Pieces:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/UbDEDEA56U/Jigsaw%20018%20-%20Page%20Setup%20Default.png (Jigsaw 018 - Page Setup Default.png)

If you change the Page Format and Preview / Create again, you'll get a differently sized image. If you use Time Saver, it will use the current settings when you run the Time Saver (not the settings when the puzzle preset was saved).

However, sometimes you just want the image, and not an entire puzzle book. In that case you can uncheck "Use Default Page Setup Settings" and choose the exact image size that you need (width and height in pixels). The next screenshot shows this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XbNdH6ZCgf/Jigsaw%20019%20-%20Page%20Setup%20Custom.png (Jigsaw 019 - Page Setup Custom.png)

Choosing Different Page Layouts

Puzzle Maker Pro - JigSaw supports three page layouts. These are selected in the "Puzzle Settings" tab, not in the global "Page Layout" tab.

Single Page
Double Page
Pieces Only

These different options have different impact on your book layout, and serve different purposes.

1 Single Page Layout

This style is used for most of the examples and tutorials. It will print the puzzle pieces and the puzzle grid on a single page.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ju1lwUSyqJ/Jigsaw%20020%20-%20Layout%20Single%20Page.png (Jigsaw 020 - Layout Single Page.png)

This format is intended for jigsaw puzzles you can copy/draw, instead of the cut out jigsaw puzzles. If you do want the ability to cut out the pieces, choose to "Add Blank Page after each puzzle", a checkbox that is below the page layouts. This will make sure the back of the page is blank. Additionally this will force the page to be printed on the right page of a spread, which may introduce another blank page before the current page.

2 Double Page Layout

The double page layout is also intended for copy / draw puzzles. In the preview you see the pieces page:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/mDi9LsLDpH/Jigsaw%20021%20-%20Layout%20Double%20Page.png (Jigsaw 021 - Layout Double Page.png)

if you check "Preview Solution", it will instead show the layout and size of the puzzle grid (the solution is identical to the puzzle, except for the printed puzzle pieces):

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Ght8pFkkvu/Jigsaw%20022%20-%20Layout%20Double%20Page%20Puzzle%20Pieces.png (Jigsaw 022 - Layout Double Page Puzzle Pieces.png)

The Double Page layout will force a new spread in your book. The pieces will be printed on the left page of the spread, the puzzle grid will be printed on the right page.

The option to add a blank page will have no effect for this format.

3 Pieces Only Layout

The Pieces Only Layout is for cut out puzzles, the puzzle grid will not be included in the puzzle book. (The layout is identical to the first screenshot show for the Double Page Layout.

Just like the Single Page Layout, "Add Blank Page" will force the pieces to be printed on the right page of a spread, and it will keep the back of the page blank. For this setting, this is optimal, so you don't accidentally cut up other puzzles on the back of the page.

Font Styling

You can choose any (TrueType) font on your computer for the printed coordinates. Just click the white area that has the font name (by default "Arial", in this screenshot "Artless") and the Font Setup window will be shown, where you can configure and preview the font settings.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1PQPuu1YAz/Jigsaw%20015%20-%20Font%20Styling.png (Jigsaw 015 - Font Styling.png)

Remember that not all fonts are free to use in commercial works. We have a separate tutorial to find out if you can legally use your font.

Line Width and Color

You can set the Line Width and Color for the puzzle and solution, and separately for the puzzle pieces. That way you can choose for thicker lines if the puzzle pieces are intended to be cut out.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/zGokAZ8tVW/Jigsaw%20016%20-%20Line%20Styling.png (Jigsaw 016 - Line Styling.png)

Help Lines

In addition to the puzzle piece border lines, you can also add Help Lines. These will help children (or adults) to draw parts of the puzzle piece in the right location. This can be especially helpful if you have puzzle pieces with lots of details. The next screenshot shows an example. The purple color for the Help Lines was chosen to contrast with the bright colors.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XFp9E9y0aY/Jigsaw%20017%20-%20Help%20Lines.png (Jigsaw 017 - Help Lines.png)

FAQs directory