Question 1

Getting Started with Nonconsecutive Sudoku

Accepted Answer

Getting Started with Nonconsecutive Sudoku

This tutorial applies to:

https://www.bookpublishertools.com/product/puzzle-maker-pro-nonconsecutive-sudoku-9x9
Puzzle Maker Pro - Nonconsecutive Sudoku Other Squares

Nonconsecutive Sudoku

Nonconsecutive Sudoku is a sudouk variation with additional rules for the grid: consecutive numbers cannot be adjacent. In other words, when there's a 3 in a cell, the cells next to it - horizontally and vertically - cannot contain a 2 or a 4.

In our modules for Nonconsecutive Sudoku, the highest and lowest numbers are considered consecutive as well: In a 9x9 grid, the 1 and 9 can also not be adjacent to each other.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/tEiJuBOOHT/Nonconsecutive.PNG (Nonconsecutive.PNG)

This image illustrates the impact of this rule: In a regular sudoku, if the numbers 2, 4 and 6 would be placed like this, there would be 6 available numbers for the center cell: 1, 3, 5, 7, 8 and 9. (in a 9x9 grid sudoku).

For Nonconsecutive Sudoku there are quite a few restrictions:

the 2 removes the 1 and 3 from the options
the 4 removes the 3 and 5 from the options
the 6 removes the 5 and 7 from the options

Instead of 6 different numbers, there are only 2 options for the center cell: the 8 and 9.

As you can see the nonconsecutive rule hugely diminishes the number of options for the grids. As a result, there are significantly fewer nonconsecutive sudoku puzzles available.

Find Nonconsecutive Sudoku in Puzzle Maker Pro

To create Nonconsecutive Sudoku puzzles in Puzzle Maker Pro:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/GYxuecZjSI/Nonconsecutive%20Sudoku%20Overview.png (Nonconsecutive Sudoku Overview)

Go to Sudoku Variations
Select one of the Sudoku Grid Sizes that are available for Nonconsecutive Sudoku (6x6, 8x8, 9x9, 10x10, 12x12, 14x14, 15x15, 16x16)
Select "Nonconsecutive" in the Variation menu.

There are quite a few tutorials about all the regular features of Sudoku in Puzzle Maker Pro, ranging from grid setup to symbol options, please check the tutorials below.

Note: Even though it's possible to use images for Nonconsecutive Sudokus, it doesn't make much sense, and the sudokus may be impossible to solve, since there are no odd and even images.

Introduction

In the getting started tutorial, we discussed easy ways to quickly make a nonogram puzzle. In this tutorial, we'll be looking into how to edit your nonogram to make it fit your requirements.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/uLKz4TkItx/Nonogram%20Basic%20result.jpg (Nonogram Basic result)

Where we left off last time

Advanced Options

For this tutorial we're using the same reference as before, but you're free to pick another image if you want. The first thing we can do is go to the Advanced Tab.

Here you'll see multiple options.

First of all, you can manually change the amount of rows and columns (cols) for the puzzle.

Below that, is a checkbox for small squares. This is great if you have large nonograms, so they can still fit on a page without you having to resize.

There's also the option for fixed dimensions. Let's select this option. This option will force the amount of rows and columns you have selected earlier. For this example, we have it at 30 rows, and 30 columns. We can also change this option for a bigger or smaller puzzle. Say you have a rectangular image, then maybe you want to change it to 30 by 40.

Below the fixed dimensions checkbox is also the choice for the image position. If you select center, additional empty rows will be created. If you select stretch, the image will get stretched so it fills in the puzzle properly. Below you can see the results for both options.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/O8I7lrQYpa/Stretch%20vs%20center.jpg (Stretch vs center)

This can lead to some very funny results if you force a square puzzle into a rectangular box, or the other way around. An example below.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/SpzFZD9YnS/Stretched%20out%20puppy.jpg (Stretched out puppy)

Since this isn't the result we want, no matter how funny it can be, let's reset to 30 by 30, and stretched position.

Edit Options

Time to go to the Edit tab to see what we can do for our puppy here.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/arx1aJWoiu/edit%20screen.jpg (Edit Options)

Right now, we can't do much. But once we select "Edit Mode", a world of possibilities opens up.

First, we can add rows and columns on basically every side of the puzzle. These rows and columns will be blank when we add them, and if you select "remove padding", all empty rows will be removed. It basically does the same as the "remove padding" on the left of the screen.

So why is it important that we can add and remove rows?

Because another possibility opened up when we selected Edit Mode.

We can now click on squares to add them to the puzzle, or remove them, to further finetune the result.

Try it yourself. Click on a square that is black, and it'll become white. The numbers in the rows and columns will also automatically be changed.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/fEXYqr4y78/Nonogram%20creating%20a%20puzzle%20from%20scratch.jpg (Nonogram creating a puzzle from scratch)

In the example above we opened a blank screen (essentially, we loaded a picture that had nothing on it), and manually clicked some tiles on to create a very rudimentary flower.

Now, Puzzle Maker Nonogram has no click and drag option to mass select squares, so it's probably best for your sanity if you work from a png, and don't try to create a massive nonogram by hand.

But this means we can finetune our nonogram more, to make it perfect for our purposes. One thing that is very unsatisfying about the nonogram we've been working with so far is the eyes. They aren't symmetrical and stand out a lot. So let's fix that first, and maybe change a few other small details too.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/lmlQ5IZqN7/Nonogram%20final%20doggy.jpg (Nonogram final doggy)

And there's the final appearance for our doggy. If we save the puzzle, both the puzzle and the solution get saved in the map we have selected.

How to create Puzzles

The primary function of Puzzle Maker Pro is to create puzzles for you.

You can set the the resulting image size and file format on the Output Settings / Puzzle Files tab, and set all specific puzzle settings on the Puzzle Settings tab.

Which files will be created by Puzzle Maker Pro?

For most puzzle types this will result in

A file containing the puzzle image in JPG or PNG format (in the project/puzzles folder)
A file containing the solution image in JPG or PNG format (in the project/solutions folder)

In some cases additional files will be created:

For Mazes, the SVG add-on will let you create the maze drawing in SVG format. This is an efficient vector format that can be used to display the puzzle on a web page, for further editing or styling in Adobe Illustrator, or to control cutter machines such as Silhouette
An XML file containing specific information about the puzzle, to use when you create puzzle books
A TXT file with the words used in a Word Search puzzle, and an additional file with the remaining words from your word list

You can use these files in any way you like. There is no obligation to create your puzzle books with Puzzle Maker Pro.

How to create Puzzle Books

After creating your puzzles, Puzzle Maker Pro will automatically create a puzzle book for you. Consider this a friendly gesture of Puzzle Maker Pro - it does not aspire to compete with professional book layout software such as Adobe Indesign, Affinity Publisher or Microsoft Publisher.

This is called "Additional Output". It will use the settings on the Output Settings / Additional Output tab, and the Output Settings / Page Format tab to create a PDF or Powerpoint file according to your specifications.

If you have set the options to create additional output, it will do so immediately after creating the puzzles (when you click the Create button).

How does the Time Saver fit in?

The Time Saver extension allow you to create puzzles a lot faster, by creating puzzles with different settings in one go. It speeds up Step 1 (see above). It will create puzzles for each setting you specified, and will create a puzzle book after all the puzzles have been generated.

Question 5

How to Use the Time Saver for Latin Squares

Accepted Answer

This tutorial explains how to use the Time Saver for Latin Squares.

Time Saver Features

For each puzzle module, the Time Saver Add-On will unlock different options for faster puzzle creation, as well as advanced Page Layout options.

Time Saver - Fast

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/8QhVGxud68/Latin%20Squares%20Time%20Saver%20Screenshot%20Steps.png (Latin Squares Time Saver Screenshot Steps.png)

The "Fast" mode for the Time Saver allows you to quickly create puzzles with different grid sizes and difficulty levels. These puzzles will use the style settings of the current Puzzle Settings.

Make sure "Use Time Saver to generate Puzzles" is checked (1). You'll see the text on the Create button change from "Create" to "Create (TS)" (5), where TS stands for Time Saver.
Choose a Grid Size, Difficulty level and Quantity, and click "Add Row" (2). This will add a row to the table. You can edit the settings for each row afterwards. (Note: The "Variation" option is not used yet)
If you want to edit the settings, click on the downward arrow next to the Grid Size in a row, or click one of the Difficulty or Quantity cells. (Note: if you select a higher difficulty level than is allowed for the grid size, it will use the highest available difficulty level. Example: If you select difficulty level 3 for 3x3 puzzles, it will still use difficulty level 1)
You can delete selected rows or select all rows from the table (4)
Click "Create (TS)" to create a puzzle books with your settings.

Time Saver - Presets

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/2JPeRZGDTr/Latin%20Squares%20Time%20Saver%20Presets%20screenshot%20Steps.png (Latin Squares Time Saver Presets screenshot Steps.png)

You can also use your own presets to create a puzzle book. (You can save presets on the Puzzle Settings tab - it will save all the specific settings, such as grid size, symbol setup and colors).

Make sure the "Use Time Saver to generate Puzzles" and the "Use Time Saver - Preset Puzzles" are checked
The list at the left should show all the presets for "Latin Squares" that you have saved. You can select one or multiple presets to use
Click Add Selected or Add All to add the presets to the list at the right
The list at the right will be used to create puzzles and optionally an Instant Puzzle Book. You can edit the quantity for each preset
Click "Create (TS)" to create puzzles and optional an Instant Puzzle Book from your presets.

Time Saver - Page Layout Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/q4mw0xmobJ/Puzzle%20Maker%20Pro%20-%20Time%20Saver%20-%20Layout%20Options.png (Puzzle Maker Pro - Time Saver - Layout Options.png)

With the Time Saver, you can set the layout for your Instant Puzzle Books. For Latin Squares puzzles you should use the settings on the "General Layouts" tab.

You can choose to collate the puzzles and solutions (group all the puzzles together and group all the solutions together)
Set the number of Rows and Columns for your puzzles page. If you use Collate setting A, this layout will also be used for the solutions
Set the number of Rows and Columns for your solutions page
Optionally change the padding between the rows and columns

Question 6

Geometric String Art Designer - Glossary of Shapes and Segments

Accepted Answer

Glossary of Shapes and Segments

Currently there are five different types of shapes in Geometric String Art Designer:

Squares
Circles
Lines
Triangles
Polygons (5 up to 10 sides)

Squares

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Vv2X33qRqU/Geometric%20String%20Art%20Designer%20Square%20Segments.PNG (Geometric String Art Designer Square Segments.PNG)

For a square (or rectangle) shape, there are several options to define segments:

"Full" is the entire square, when you connect to this, the pins wil be placed on the entire contour of the square
Sides: Top, Left, Right and Bottom each are the full side of a square. Please pay attention when you rotate the square, because the position of these sides may change
Half Sides: The smallest segment are half sides, these are named Top 1, Top 2, etc, so you can easily see where a side is located. This will allow you to create connections between e.g. Top 2 and Bottom 2 of the same Square. The numbers of these segments are clockwise (Bottom 1 is at the right of Bottom 2)

Circles

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/LmXOquy3qz/Geometric%20String%20Art%20Designer%20Circle%20Segments.PNG (Geometric String Art Designer Circle Segments.PNG)

For Circles we use the same naming style as for squares:

"Full" - the entire circle
Quarters: Top, Left Right Bottom, each cover 1/4th (= 90 degrees or PI/2) of the circle
Eights: Each segment covers 1/8th (= 45 degrees or PI/4) of the circle. Just like for Squares, the numbering order is clockwise.

Lines

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/u69vFu5Dkv/Geometric%20String%20Art%20Designer%20Line%20Segments.PNG (Geometric String Art Designer Line Segments.PNG)

For Lines, we also use "Top" and "Bottom", even when the lines are horizontal or rotated. The top of the image shows vertical lines, the bottom of the images shows the segments for horizontal lines.

Triangles and Polygons

For Triangles and all polygons (5 up to 10 sides), we use different names.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/OSan2Bfasr/String%20Art%20Designer%20Polygon%20Segments.jpg (String Art Designer Polygon Segments)

"Full" is the entire shape
"Side 1" is the name of a side of the polygon
"Side 1 Part 2" is the name of half the side of a polygon.

The screenshot shows the numbering for a decagon and also shows the list of all the available segments. In the example, you can see that "Side 4" and "Side 8" have been connected, resulting in the string pattern you can see.

Font Styling

You can choose any (TrueType) font on your computer for the printed coordinates. Just click the white area that has the font name (by default "Arial", in this screenshot "Artless") and the Font Setup window will be shown, where you can configure and preview the font settings.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/1PQPuu1YAz/Jigsaw%20015%20-%20Font%20Styling.png (Jigsaw 015 - Font Styling.png)

Remember that not all fonts are free to use in commercial works. We have a separate tutorial to find out if you can legally use your font.

Line Width and Color

You can set the Line Width and Color for the puzzle and solution, and separately for the puzzle pieces. That way you can choose for thicker lines if the puzzle pieces are intended to be cut out.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/zGokAZ8tVW/Jigsaw%20016%20-%20Line%20Styling.png (Jigsaw 016 - Line Styling.png)

Help Lines

In addition to the puzzle piece border lines, you can also add Help Lines. These will help children (or adults) to draw parts of the puzzle piece in the right location. This can be especially helpful if you have puzzle pieces with lots of details. The next screenshot shows an example. The purple color for the Help Lines was chosen to contrast with the bright colors.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XFp9E9y0aY/Jigsaw%20017%20-%20Help%20Lines.png (Jigsaw 017 - Help Lines.png)

Getting Started with Nonconsecutive Sudoku

How do I use the advanced and edit tabs of Puzzle Maker Nonogram

Mazes 2D Tiles Overview (Video)

How to create puzzles and puzzle books with Puzzle Maker Pro

How to Use the Time Saver for Latin Squares

Geometric String Art Designer - Glossary of Shapes and Segments

How Can I Change the Styling for Puzzle Maker Pro - Jigsaw puzzles?

Can I get an overview of what Puzzle Maker Pro can do for me?

Getting Started with Mazes 3D Isometric (Video)

Puzzle Maker Pro - Mazes 2D Other Shapes Video Overview