Question 1

How to use the Layout Options in Time Saver

Accepted Answer

Layout Options for Time Saver

This tutorial presents a short overview of the Layout Options in Time Saver. Currently this feature is available in:

Time Saver for Sudoku

Using the Layout Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/rfFO6lmpgA/Layout%20Options%20for%20Time%20Saver%20Overview.jpg (Layout Options for Time Saver Overview)

Click "Show Layout Options" to show the Layout Options section. By default, the main Layout settings for Puzzle Maker Pro will be shown.

There are four different options:

Layout: the actual Page Layout for the puzzles. This can change for each row in the table with puzzles. The value shown at the top (in the Layout Options section) will be used when you add a new row
Collate: Print puzzles first, and solutions later
New Page for Section (Puzzle / Solution): start puzzles and/or solutions for the new puzzle type (row in the table) on a new page. This allows you to add pages, e.g. with a chapter heading or with a short tutorial for the puzzle type

Editing the Page Layout

The Layout will be shown as P:3x2, S3x2 or P/S:3x2. P stands for Puzzle pages, S for Solution pages. If you don't use collation, the code "P/S" will be used - in that case puzzles and solutions will be printed using the same layout.

To change the default layout (in the Layout Options section), click "Edit Layout". To change the layout for a single row in the table, click the cell containing the layout. (In the example that would be the last cell in each row, containing the text "P:3x2, S3x2".

This will display the window to edit the layout:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/3vMAnBq5Iv/Page%20Layout%20Setup.jpg (Page Layout Setup)

In this window you can set the layout for puzzle pages by setting the number of rows and columns on the page. A schematic image will update when you change the settings. If you use collation, you can also set the page layout for the solution pages.

Question 2

How to create Basket Weave Mazes with Puzzle Maker Pro - Mazes 2D Bricks

Accepted Answer

How to create Basket Weave Mazes with Puzzle Maker Pro - Mazes 2D Bricks

This tutorial applies to Puzzle Maker Pro - Mazes 2D Patchwork Bricks.

The tutorial "How to use Mazes 2D Squares" describes how to use the generic options for Mazes 2D.

The module Mazes 2D Bricks for Puzzle Maker Pro contains two maze puzzle types:

Patchwork Bricks, and
Patchwork Basket Weave

This tutorial focuses on Patchwork Basket Weave

Mazes 2D Patchwork Basket Weave lets you design your own maze using the Basket Weave pattern. You can customize the size of the basket, and there are quite a few colorization options, resulting in a more playful (or artistically fulfilling) maze.

The module includes

1 Basket Weave pattern in 8 sizes (2 to 9 bricks/cells per tile)
5 colorization options, and color randomization control

In addition to the Basket Weave options, this module includes the 'standard' maze generation and style options in the Puzzle Maker Pro - Mazes 2D collection.

Note: The Masks Add-On is not available for this module.

Creating Patchwork Basket Weave mazes

Select Mazes 2D in the main Puzzle Type dropdown menu, then select Patchwork Basket Weave in the (maze) Type dropdown menu. Click "Next Preview" to quickly get a first impression. (Changing settings does not automatically create a new preview, because you may want to change multiple settings, and the mazes, especially at larger sizes, may take some time to generate).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/InjoZEAcpz/Patchwork%20Basket%20Weave%20Overview.png (Patchwork Basket Weave Overview)

On the special Basket Weave tab, you can see four groups of settings

Select the size (number of bricks) for each tile,
Select the Color Style and Accent Color
Select the Accent Color for Color Style 1
Select the Randomization Style for Color Styles 2 and 4

Basket Weave Steps

The number of Steps determines the number of bricks in each 'tile'. You can select a number between 2 and 9, resulting in 2 to 9 bricks horizontally in the first tile, and 2 to 9 bricks vertically in the second tile, etc.

Please be aware that larger tiles (e.g. Steps 7,8,9) will result in mazes that take less steps to solve (because the cells are larger).

In the screenshot above you can see a 20 x 20 grid, using tiles with 3 bricks each. At the right side and at the bottom, you can see that some of the tiles are cut off. That's because 20 is not a multiple of 18. You'll see 6 full tiles and 2 thirds of the tiles at the right and at the bottom.

To prevent this, you can use the option "Full Tiles Only", that will use the largest number of tiles possible without cropping any of them.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/bUaHpvv7WJ/Patchwork%20Basket%20Weave%20Full%20Tiles%20Only.png (Patchwork Basket Weave Full Tiles Only)

Basket Weave Colorization

There are 5 colorization options for Basket Weave mazes:

None - no additional colors will be applied
Bricks - Color Range: A custom color range will be calculated (see below). Brick 1 in each tile gets Accent Color 1, the last brick gets Accent Color 2, and each brick in between gets a color 'between' the other two
Bricks - Random Colors: Each brick gets a random color, but bricks in the same position will get the same color
Tiles - Checkerboard: Every other tile will be colored with the Accent Color, creating a checkerboard pattern
Tiles - Random Colors: Each tile will get a randomized color. Some tiles may get the same color

Color Range

The Color Range option used the two colors Accent Color and Accent Color 2, and will calculate steps between the RGB values of these colors. Let's say Accent Color = RGB (255,20,0) and Accent Color 2 = RGB (255,162,154). When there are three bricks in each tile (Steps = 3), the middle tile will get the 'averaged' color RgB (255, 91, 77). 91 is exactly in the middle between 20 and 91, 77 if exactly in the middle between 0 and 154.

This brief explanation is just to get a feel for it. It's best to play with the colors and find results that appeal to you. This mechanisme will work with grayscale colors as well.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/sof2BqySIP/Patchwork%20Basket%20Weave%20Color%20Range.png (Patchwork Basket Weave Color Range)

Random Colors

For random colors, a new color is selected 'near' Accent Color. The "Randomization Range" slider determines the maximum percentage that the new color can be changed from the Accent Color. When you use bricks with random colors, Brick 1 in each tile will always get the same color, etc.

When you select Tiles with Random Colors, each tile (the bricks in each tile) will get a different random color.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/MBYGaDjcFI/Patchwork%20Basket%20Weave%20Random%20Colors.png (Patchwork Basket Weave Random Colors)

That's all... it's a Basket Weave is a simple pattern, that gets a unique look and feel with the colorization options.

How to create Brick Mazes with Puzzle Maker Pro - Mazes 2D Bricks

This tutorial applies to Puzzle Maker Pro - Mazes 2D Patchwork Bricks.

The tutorial "How to use Mazes 2D Squares" describes how to use the generic options for Mazes 2D.

The module Mazes 2D Bricks for Puzzle Maker Pro contains two maze puzzle types:

Patchwork Bricks, and
Patchwork Basket Weave

This tutorial focuses on Patchwork Bricks

Mazes 2D Patchwork Bricks lets you design your own maze in a several brick bond patterns. In addition to the different patterns and customizations, you can use an accent color for some of the bricks, resulting in a more playful (or artistically fulfilling) maze.

The module includes

7 different brick bond types
3 options to customize the size and position within each bond type
6 colorization options (including randomization of the colorization pattern and randomization of the color)

In addition to the Bricks options, this module includes the 'standard' maze generation and style options in the Puzzle Maker Pro - Mazes 2D collection.

Note: The Masks Add-On is not available for this module.

Using Mazes 2D Patchwork Bricks

Select Mazes 2D in the main Puzzle Type dropdown menu, then select Patchwork Bricks in the (maze) Type dropdown menu. Click "Next Preview" to quickly get a first impression. (Changing settings does not automatically create a new preview, because you may want to change multiple settings, and the mazes, especially at larger sizes, may take some time to generate).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/u2HAbt0HhQ/Patchwork%20Bricks%20Overview.png (Patchwork Bricks Overview)

On the special Bricks tab, you can see three groups of settings

Select the brick bond type (variation)
Brick and position customization
Bricks Colorization

Bond Types

Currently there are 7 bond types included in Patchwork Bonds:

Flemish Bond
Stretcher Bond
Raking Stretcher Bond
Dutch Bond
English Cross Bond
Dearne's Bond
Rat Trap Bond

Customization Options

In general, as with most features in Puzzle Maker Pro, it's best to experiment and find out your own preferred settings.

Using slider "Height/Width Ratio" you can change the dimensions of the short brick

Using slider "Large/Small Brick Ratio" you can change the size of the large brick (relative to the short brick)

Using slider "2nd Row Shift" you can change the position of each 2nd row of bricks. In reality you shouldn't do ths for load-bearing walls... But for a simple maze, you can be creative.

The screenshot below is just one example of customized brick settings.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/yZPGzJsDSg/Patchwork%20Bricks%20Customization.png (Patchwork Bricks Customization)

Note: with these settings it's possible to create bricks that have barely any width, making it hard to draw the maze. The software should not crash when you try this, but the walls and passages may overlap. Always check a couple of previews to verify that the results are perfect.

Colorization Options

There are several ways to colorize the bricks in the bricks mazes, creating a more playful and/or elegant experience:

None, no colors will be used, besides the colors on the Style tab
Small Bricks, the small bricks will be colored using the Accent Color
Uneven Bricks, this will color every other brick using the Accent Color
Uneven Rows, this will color the bricks in row 1, 3, 5, etc, using the Accent Color
All Bricks, this will use the Accent Color for all bricks. This works best with the "Randomize Colors" option (see below)
Randomize Pattern, this will use a random Colorization pattern for each puzzle that's generated

The option "Randomize Colors" will create random colors close to the chosen Accent Color, creating a lively, more or less organic, colored wall. (Randomization is done by using a random number to the R, G and B codes of the color).

How to use Puzzle Maker Pro - Mazes 2D DIY Mazes

This tutorial applies to Puzzle Maker Pro - Mazes 2D DIY Mazes.

The tutorial "How to use Mazes 2D Squares" describes how to use the generic options for Mazes 2D.

The tutorial for "Patchwork Log Cabin" describes the common features - this tutorial focuses on how to draw and create your own maze.

Mazes 2D DIY Mazes lets you design your own maze. Entirely, or as a building block that will be repeated and rotated to fill a larger grid.

This module includes:

The option to use your own maze, by creating a text file that can be selected (imported) in Puzzle Maker Pro
3 colorization options (no colors plus two ways to add color accents, dependent on the your maze specifications)
Several options to fill a larger grid (maze) with a smaller design. If you are using POD Graphics Maker as well, you'll recognize this. (this feature is described in detail in the tutorial for "Patchwork Log Cabin"

In addition to the log cabin options, this module includes the 'standard' maze generation and style options in the Puzzle Maker Pro - Mazes 2D collection.

Note: There is no Masks Add-On available for this module. However, you can build the mask into your DIY Maze by adjusting the pattern.

Using Mazes 2D DIY Mazes

Select Mazes 2D in the main Puzzle Type dropdown menu, then select DIY Mazes in the (maze) Type dropdown menu. Click "Next Preview" to quickly get a first impression. (Changing settings does not automatically create a new preview, because you may want to change multiple settings, and the mazes, especially at larger sizes, may take some time to generate).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/IBkFx743jG/DIY%20Mazes%20Overview.png (DIY Mazes Overview)

On the special DIY Maze tab, you can see several groups of settings:

File selection
Repeat settings
Colorization settings

How to use the Repeat settings and colorization settings is described in the Patchwork Log Cabin tutorial. The way it looks will completely depend on your maze.

Creating the maze

There are 6 steps to create your maze

Draw the maze
Number the different cells / shapes in your maze
Create a text file from these numbers
Select the text file in Puzzle Maker Pro
Click Preview
Adjust maze settings

Step 1 - Draw the maze

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Lo3eOJFSFz/DIY%20Maze%20-%20design.jpg (DIY Maze - design)

This example image was created in Powerpoint (using a 5x5 table), but you can draw with pencil and paper, or any way you like. The image with the different cells or shapes is just for you, it's not just by Puzzle Maker Pro.

The one thing you need to take care of, is that the grid is made out of squares, each row has the same number of squares, and each column has the same number of squares.

You obviously do not need to design the passages between the cells. These will be generated by Puzzle Maker Pro. if two shapes have multiple shared borders (such as shape 3 and 4 in the next image), Puzzle Maker Pro will randomly select one of the borders.

Each shape needs to be fully connected (in math terms: 4-connected). That means the squares in the shape should be next to each other vertically or horizontally. Otherwise no maze can be generated.

You can choose your own size, up to 100x100. However, in most cases you get create effects by using a smaller design, e.g. 5x5 to 10x10 squares, and then use the power of Puzzle Maker Pro to create randomized repeats.

Step 2 - Number the cells

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/I5kRldmEwk/DIY%20Maze%20numbered%20cells.jpg (DIY Maze numbered cells)

You can use numbers or letters or words, to identify each shape in your maze design. The example uses consecutive numbers (this is the best way for quality control, to be sure there are no duplicate numbers in different shapes).

Step 3 - Create a text file

Now create a simple text file, that can be edited in Notepad. The software can NOT handle Word, Excel or Powerpoint files!

Here's a screenshot of the file DIYMaze.txt that I created for this tutorial:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/XU6nyc8ohF/DIYMaze.jpg (DIYMaze)

The commas will be used to separate the different cell/shape codes. You cannot use another symbol instead.

That's really all there's to it.

Step 4 - Select the text file

That's number (1) in the screenshot at the top of this page

Step 5 - Click Preview

You'll need to click "Next Preview" to see the results. This is done on purpose, because you may want to adjust several settings at once, and generating a custom maze can take a bit of time (a second or two, for very large mazes, depending on your computer)

Step 6 - Adjust maze settings

Depending on your design, you can now change the grid size and the repeat options, to get differently looking randomized mazes from your design.

Advanced design options

Excluding squares from the maze

There is no Masks option for DIY Mazes, but you can easily exclude cells from the maze: Just use a 0, or nothing at all to add a square that's excluded.

For example 1,1,0,2,2 - this is identical to 1,1,,2,2 (the first option is easier to read and to adjust visually).

Colorization

In addition to the numbers for your maze, you can add a separate (!) line starting with the word 'Accent1' or 'Accent2' that has the numbers that need to be colorized. The lettercase of the word Accent1 doesn't matter.

Accent1 will be used if you select Color Style 1, acccent2 will be used if you select Color Style 2.

This will use the specified accent color for shapes 1, 6 and 9. This can give you a result like the following screenshot:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/Ow7ueuRR6Y/DIY%20Maze%20Accent%20Colors.png (DIY Maze Accent Colors)

Final remarks

Just like other Puzzle Maker Pro modules, it's best to play around with the settings, generate previews of the mazes, and find settings that fit your style. Don't forget to save these settings as presets, for later reuse!

How to use Puzzle Maker Pro - Mazes 2D Patchwork Log Cabin

This tutorial applies to Puzzle Maker Pro - Mazes 2D Patchwork Log Cabin.

The tutorial "How to use Mazes 2D Squares" describes how to use the generic options for Mazes 2D.

In this tutorial we'll explain the specific 'log cabin' features.

Log Cabin is a type Patchwork design, resembling the way logs are stacked to build a log cabin.

This module includes:

4 different log cabin designs
3 colorization options (no colors plus two ways to add color accents, dependent on the log cabin design)
Several options to fill a larger grid (maze) with a smaller log cabin design, just the way it's done in patchwork designs.

In addition to the log cabin options, this module includes the 'standard' maze generation and style options in the Puzzle Maker Pro - Mazes 2D collection.

Note: Due to the specific algorithm for Mazes 2D Patchwork Log Cabin, the Masks Add-On is not available for this module. It would go against the log cabin concept, and additionally, you wouldn't be able to mask smaller parts of the 'logs'. However, the Mazes 2D DIY Maze module can do all this and more.

Mazes 2D Patchwork Log Cabin

Select Mazes 2D in the main Puzzle Type dropdown menu, then select Patchwork Log Cabin in the (maze) Type dropdown menu. Click "Next Preview" to quickly get a first impression. (Changing settings does not automatically create a new preview, because you may want to change multiple settings, and the mazes, especially at larger sizes, may take some time to generate).

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/77E92SJ0ue/Patchwork%20Log%20Cabin%20Overview.png (Patchwork Log Cabin Overview)

On the special Log Cabin tab, you can see several groups of settings:

The Log Cabin settings Variation and Steps
Repeat settings
Colorization settings

Variation and Steps

Currently there are four different Log Cabin variations in this maze module:

Standard
Courthouse Steps
Chimneys and Cornerstones
Chevrons

For each variation you can customize the size ("Steps"), this will add more log levels.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/J4gJVE2Imb/Patchwork%20Log%20Cabin%204%20Variations.JPG (Patchwork Log Cabin 4 Variations.JPG)

Repeat Settings

As you can see, these separate grids have quite long cells, which would result in fairly easy mazes. That's why there's the option to fill a larger grid with these log cabin patterns, and generate a maze for the entire grid. The grid size is determined by the Rows/Columns settings in the Puzzle Control area.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/fETY0Ty7Fp/Patchwork%20Log%20Cabin%20Repeat%20Patterns.JPG (Patchwork Log Cabin Repeat Patterns.JPG)

There are several 'Repeat' options:

Copy - this will just copy the log cabin pattern until the grid is filled.
Rotate Clockwise (1x, 2x, 3x)
Mirror Vertically or Horizontally or both
Random - will randomly select one of the repeat options for each maze you generate.

Finally there's the "Full Repeats Only" option: When you want a 50x50 puzzle, but the log cabin size you selected is 8x8 squares, the log cabins at the right and bottom will be cut off. This may not be a problem, but especially when you use the colorization options, you may want to show only full log cabins. The Full Repeats Only option lets you do that. In the 8x8 log cabin example and a 50x50 maze, it would generate a 48x48 maze instead, using 6 log cabin patterns in each direction.

Colorization Settings

Colorization of your mazes is not required, but it can be a nice touch. In patchwork / quilting there's usually a kind of contrast in the different fabrics that are used, resulting in patterns like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/hsLv9rHrj8/Patchwork%20Log%20Cabin%20Colorization.JPG (Patchwork Log Cabin Colorization.JPG)

You can use this for a maze as well. There are three colorization options and a random option

No Color
Color Variation 1
Color variation 2
Random (Randomly choose one of the three options for each maze you generate)

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/UQQLVJHdnl/Patchwork%20Log%20Cabin%20Maze%20Colorization.JPG (Patchwork Log Cabin Maze Colorization.JPG)

The colorization can give a true patchwork log cabin look and feel to the maze, as you can see in these examples.

Just like other Puzzle Maker Pro modules, it's best to play around with the settings, generate previews of the mazes, and find settings that fit your style. Don't forget to save these settings as presets, for later reuse!

How to use Puzzle Maker Pro - Mazes 2D Cubism

This tutorial applies to Puzzle Maker Pro - Mazes 2D Cubism and Puzzle Maker Pro - Mazes 2D Cubism Variations Add-On.

The tutorial "How to use Mazes 2D Squares" describes how to use the generic options for Mazes 2D.

In this tutorial we'll explain the specific 'cubism' features.

This module works by splitting the entire canvas into smaller areas (squares, rectangles or triangles).

Note: Due to the algorithm used by Mazes 2D Cubism, the Masks Add-On is not available for this module.

Mazes 2D Cubism

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/7pdkcni44w/Mazes%20Cubism%20Overview%20Fifty%20Fifty.png (Mazes Cubism Overview Fifty Fifty)

To use Mazes 2D Cubism, select "Mazes 2D" in the puzzle type dropdown menu, and then select "Cubism" in the Puzzle Control area. Next, click preview to generate a first maze.

The number of rows and columns defines the smallest possible square in the maze. However, due to randomization, it's not always guaranteed that this size will occur
The "Split Ratio" slider controls how often squares (or rectangles) will be split into smaller squares or rectangles. To keep many relatively large squares and rectangles, move the slider to the left. To get many small squares and just a few larger ones, move the slider to the right.

Mazes 2D Cubism Variations

The Mazes 2D Cubism Variations Add-On adds two new variations to the Cubism mazes:

Golden Ratio
Triangles

Golden Ratio

The Golden ratio (also sectio aurea / sectio divina) is a way to split a line in two sections, where the ratio between section 1 and section 2 is identical to the ratio between section 2 and section 1 plus section 2. This can be applied repeatedly.

Triangles

The addition of triangles will result in a completely different type of maze. In this case the maze will consist of squares, rectangles and triangles.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/MF8KmHwRjV/Mazes%20Cubism%20Overview%20Triangles.png (Mazes Cubism Overview Triangles)

To use Triangles, select the "Squares / Rectangles / Triangles option (1)

Choosing Background Images

You can find the Background Images setup on the "Output Settings" tab, then look for the "Background Images" tab.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/hoFkzwiNiV/Background%20Images%20Overview.png (Background Images Overview)

Click "Select Files" to select one or more files on your computer. Click "Clear List" to start over. A list of selected images be shown at the right
If the image is too large or too small for your puzzle size, you can choose to Zoom the image to a fitting size
If the image does not have the same proportions (relative width and height) as the puzzle size, you can change the alignment settings as well
Set the transparency for the image

The result can look like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/97i6pargNi/Background%20Image%20Zoom%20Gray.png (Background Image Zoom Gray)

Puzzle Settings

Depending on the puzzle type, you may need to change the color settings. For example, with Mazes, if you have set a fill color (or floor color) for the cells or squares, these will print over the background image. Set these fill colors to Transparent to show the background images.

Zoom and Alignment

If the image is larger or has different proportions than your puzzle type, you may need to check the Zoom option.

For example, if the result looks like this:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/OJl9T5mNTo/Background%20Image%20No%20Zoom%20Black.png (Background Image No Zoom Black)

For abstract images it may be fine to show only a part of the image though (that's why the Zoom is an option)

If the image has different proportions than the puzzle, for example the puzzle is 1000x1000 pixels and the image is 1500x500, you can use the alignment options to choose where the image will be printed.

Transparency

With the transparency option, you can use colorful or black images and make them look a bit softer. For example, an image like this would ruin the puzzle, because you cannot write numbers in the squares that are completely black.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/OfFWGCfPnz/Background%20Image%20Zoom%20Black.png (Background Image Zoom Black)

By making the image more transparent (e.g. 70-80% transparent), it creates the illusion of a shadow, creating a better looking puzzle:

Question 8

Masks Add-On for Mazes 2D Squares Video Overview

Accepted Answer

Masks Add-On for Mazes 2D Squares Video Overview

Question 9

Puzzle Maker Pro - Mazes 2D Squares Video Overview

Accepted Answer

Puzzle Maker Pro - Mazes 2D Squares Video Overview

Question 10

Puzzle Maker Pro - Mazes 2D Other Shapes Video Overview

Accepted Answer

Puzzle Maker Pro - Mazes 2D Other Shapes Video Overview

How to use the Layout Options in Time Saver

How to create Basket Weave Mazes with Puzzle Maker Pro - Mazes 2D Bricks

How to create Brick Mazes with Puzzle Maker Pro - Mazes 2D Bricks

How to use Puzzle Maker Pro - Mazes 2D DIY Mazes

How to use Puzzle Maker Pro - Mazes 2D Patchwork Log cabin

How to use Puzzle Maker Pro - Mazes 2D Cubism

How to add background images to my puzzles in Puzzle Maker Pro?

Masks Add-On for Mazes 2D Squares Video Overview

Puzzle Maker Pro - Mazes 2D Squares Video Overview

Puzzle Maker Pro - Mazes 2D Other Shapes Video Overview