Question 1

How to Limit the number of words in a Word Search puzzle

Accepted Answer

Welcome to the tutorial on how to limit the amount of words in Puzzle Maker Pro Word Search.

These options are available in all versions of Word Search.

Limiting the Amount of Words

By default Word Search will try to fit as many words as possible in a grid.

However, it is possible to limit the amount of words, so there is more 'noise', and fewer words in a puzzle.

Puzzle Maker Pro – Word Search will allow you to set the number of words to unlimited (so, as many as possible), or to a certain limit.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/HSoTjmrD85/Word%20Search%20Limiting%20the%20amount%20of%20words.jpg (Word Search Limiting the amount of words)

Please be aware that this is a maximum number. Depending on the grid size, number of words, and word length, it may occur that fewer words end up in the puzzle.

Certificate not trusted

The software certificate is comparable to the certificates used on websites for https (the secure internet protocol). It is used to 'sign' the sofware and ensure that it has not been tampered with.

There are two reasons why this error may occur:

Depending on the Windows settings on your computer, you may need to manually save the certificate, before installing the plugin (or other BookPublisherTools software). You can find a guide here.
The certificate may have expired. This is not a problem for plugins that have already been installed, but it will be checked when you install a new plugin. This can be solved by downloading the newest version of the plugin. If that doesn't fix it, contact us.

Other errors

There have been a few other types of errors, all of which have been fixed by re-downloading or re-installing the plugin. If that doesn't work, please contact us.

Question 3

How do I create shaped word search puzzles

Accepted Answer

Welcome to the tutorial on how to use the Masks add-on for Puzzle Maker Pro - Word Search.

The techniques used in this word search require you own one of the following versions:

Selecting a Mask

If you select the "Use Mask" tab on the module, you can open up the Grid Editor to fine-tune masks.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/d1YYrhktrp/Word%20Search%20use%20mask.jpg (Word Search use mask)

As you open up the Grid Editor, you'll see a new screen with several options.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/NXYnn2p6In/Word%20Search%20mask%20grid%20editor.jpg (Word Search mask grid editor)

The Grid Setup. This is the same amount of rows and columns you are already using for your Word Search puzzle, but if you want to adjust the size, here is where you do that.
The option to select a mask file, or clear the mask entirely. If you choose "Select file" you will go to windows explorer, where you can select the correct file to use.
Choosing the background colour. Most .png files have a transparent background. Some other files may use white as background. Because of that, these two options are always selected. But say your mask uses a white cloud over a blue sky? then you can turn off the White, and instead select blue as the background colour, so the shape of the cloud shows up, instead of everything but the cloud.
Presets. You can save what you've done with your mask, and re-use that for later puzzles if you choose to do so. If you've already made a preset, you can load it here.
The mask screen. You can see how your mask currently looks. As a standard, everything is selected.

Now let's import a mask and see what that does.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/JBTxu70W1h/Word%20Search%20mask%20selected.jpg (Word Search mask selected)

Finetuning your mask

On the left, you can see the preview of the file, and on the right you can see what the mask looks like now.

If you want to, you can click on the right part of the screen to add or remove tiles from the puzzle. Or if the puzzle doesn't look right, you can change the size of the mask. Because this looks a bit strange, I've personally changed the format to 15 rows and 15 columns.

Once you're done, select "use mask" in the bottom right, and see what your puzzle looks like now.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/OtaI7rrPbp/Word%20Search%20mask%20added.jpg (Word Search mask added)

As you can tell, the program automatically resized the puzzle as soon as I made the mask 15 by 15. It also makes sure that all words stay within the mask used.

Now, you can either keep the mask this way, but you can also add "Print Mask as Background". This does exactly what it advertises, and turns the file you used as a mask into the background for the puzzle. This works incredibly well with some pictures, but is not a mandatory step to use.

Introduction

With the Time Saver for Letterbox you can combine multiple word lists, randomise word lists, and use more flexible layout settings for your Instant Puzzle Books. To use the Time Saver, you should have a basic understanding of Puzzle Maker Pro - Letterbox. The Time Saver will overwrite the grid size and the word list, all other options of Letterbox will be used as set in the Puzzle Settings.

Time Saver for Letterbox

With this Time Saver, you can select multiple word lists. Each word list will add one row to the 'job' table. You can then edit some settings for each row, and when you're done, generate all the puzzles.

Letterbox Time Saver

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/lRv14SRvgv/Letterbox%2050B%20Time%20Saver.png (Letterbox Time Saver)

Letterbox Time Saver

To use the Time Saver, you have to click the "Use Time Saver" option, to let Puzzle Maker Pro know what you want to create. The button "Create" [8] will then change into "Create (TS)"
Set the Rows and Columns setting for your puzzles. By default it's set to 6 by 5, but you can use different sizes to change the complexity of the puzzle, or to accomodate shorter or longer words. (This value will be used in each row when you click "Select/Add Word Lists")
Set the number of puzzles or choose Unlimited to use the entire word list. (This value will be used in each row when you click "Select/Add Word Lists")
Select word lists to use for your puzzles. Each word list should be TXT file, as described in the Letterbox tutorial. You can select multiple files at once.
After selecting word lists, rows will be added to the table. You can edit the Rows, Columns, Quantity and Unlimited settings for each word list
If you selected too many files, you can delete rows from the table
Optionally you can randomize the word order for each file, to create puzzles in a different order each time you use the same word list
Create all the puzzles and optionally the Instant Puzzle Book.

Layout Options

In addition to the Time Saver automation features, the Time Saver also unlocks the advanced layout options in Puzzle Maker Pro. On the Instant Puzzle Books -> Layout tab, you can select the number of puzzles and solutions on each page.

Time Saver Layout Setup

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/VDUPnRhcEt/Time%20Saver%20Layout%20Setup.jpg (Time Saver Layout Setup)

Time Saver Layout Setup

TXT file output

The TXT file output consists of one line for each word or phrase, for example:

This file is for your own use, you can copy the words to other software, or not use it at all, if you create Instant Puzzle Books as well.

Encoded puzzle - the first part is the encoded puzzle, ending with "||"
Solution - after the "||" you see the solution, the original word
Description - if there was a description in the source words file (or a set title if you use word sets), this will be added after a colon ":". To use sets, see: Word List format for Word Puzzles

CSV file output

CSV is a standardized file format that can be used with many applications. The example above in CSV format would look like this:

You can import this file in Excel (or other spreadsheets), for example to use it with our Replicator software, and you can even import this file into Canva (with a Pro subscription) to quickly generate a batch of images. (Note: at the moment of writing, somehow the automatic import into Canva doesn't work properly, but as a work-around, manual import will work - Open the CSV file in Excel, then select all the rows / columns and past it in the manual bulk import area in Canva).

Layout Options for Time Saver

This tutorial presents a short overview of the Layout Options in Time Saver. Currently this feature is available in:

Time Saver for Sudoku

Using the Layout Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/rfFO6lmpgA/Layout%20Options%20for%20Time%20Saver%20Overview.jpg (Layout Options for Time Saver Overview)

Click "Show Layout Options" to show the Layout Options section. By default, the main Layout settings for Puzzle Maker Pro will be shown.

There are four different options:

Layout: the actual Page Layout for the puzzles. This can change for each row in the table with puzzles. The value shown at the top (in the Layout Options section) will be used when you add a new row
Collate: Print puzzles first, and solutions later
New Page for Section (Puzzle / Solution): start puzzles and/or solutions for the new puzzle type (row in the table) on a new page. This allows you to add pages, e.g. with a chapter heading or with a short tutorial for the puzzle type

Editing the Page Layout

The Layout will be shown as P:3x2, S3x2 or P/S:3x2. P stands for Puzzle pages, S for Solution pages. If you don't use collation, the code "P/S" will be used - in that case puzzles and solutions will be printed using the same layout.

To change the default layout (in the Layout Options section), click "Edit Layout". To change the layout for a single row in the table, click the cell containing the layout. (In the example that would be the last cell in each row, containing the text "P:3x2, S3x2".

This will display the window to edit the layout:

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/3vMAnBq5Iv/Page%20Layout%20Setup.jpg (Page Layout Setup)

In this window you can set the layout for puzzle pages by setting the number of rows and columns on the page. A schematic image will update when you change the settings. If you use collation, you can also set the page layout for the solution pages.

Question 7

How to create Acrostic puzzles with Puzzle Maker Pro - Acrostic Column

Accepted Answer

This tutorial shows how to create Acrostic puzzles with Puzzle Maker Pro - Acrostic Column.

The main tutorial for Crossword Variations shows all the steps and information that applies to all the different puzzle types.

Introduction

Acrostic Column is an acrostic Crossword puzzle where a list of words is printed, and one column contains a secret word.

There are many different types of Acrostic Crossword puzzles. Acrostic Column is the name we give to the type of Acrostic Crossword where a list of words is shown, and a single 'secret' word can be found in one of the columns.

Acrostic Settings

For Acrostic Column puzzles, the "Secret Word" option is always enabled, since this is the main characteristic of the puzzle.

Acrostic Column - Secret Only

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/p0rtkhWXya/Acrostic%20Column%20-%20Secret%20Only.png (Acrostic Column - Secret Only)

Additionally, you can add "Alphabet Hints", which will make the puzzle easier to solve:

Acrostic Column - Secret and Alphabet

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/ECVWQIVHxx/Acrostic%20Column%20-%20Secret%20and%20Alphabet.png (Acrostic Column - Secret and Alphabet)

In this screenshot you see a different puzzle, and all the small numbers in the puzzle. Each number corresponds with a single letter. The numbers are randomly assigned to the letters, so each puzzle will have a different key.

Image Options

When you use the additional image options (for social media images, etc), you can specify which information is used for the image title and description:

Acrostic Column - Image Options

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/PbMxNm5S64/Acrostic%20Column%20-%20Image%20Options.png (Acrostic Column - Image Options)

For both the Title Description you can use the Word Set Title, Word Set Description, Secret Word Description (Clue) or a Custom word or phrase.

Introduction

The time saver does exactly what it says on the tin: It saves you time. It does so by allowing you to batch create puzzles. You get less control over the details, but if you have your lists set up, you can create puzzles much faster than if you did it manually.

Sounds pretty nifty right? Let's switch to the Time-Saver tab, and see how it's done.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/3c06l0tQ5l/Time%20Saver%20Criss.jpg (Time Saver Criss)

Main Options

The main options are very similar to the style panel in the normal version. You can choose the font size. Here you can select a uniform font size for every puzzle, or a variable font size. It's automatically on variable. This way, if you create multiple criss cross puzzles with different sizes, it will automatically look for the optimal font size.

You can also select "One Size Fits All", where it uses the largest possible font size that fits in every puzzle. This can create funky looks if you're using multiple very different sizes, but it also creates a more uniform look in terms of font.

Third, you can select the fixed font size. Everything will be the font size you select. If you know how big your puzzles are, and what size font you're going to need, or if you are creating books for people with sight problems, you could want this. However, keep in mind that if your math is off, this can create very strange effects.

Next, you can select the puzzle alignment. Because it's near impossible to create puzzles that fit exactly within the grid size you chose, you can choose your own alignment for the puzzles. You can choose to have them all aligned at the top, the bottom, the middle, and if you want them aligned to the left side of the page, the right side, or, again, the middle. You can also choose to align the words with the puzzle.

Word List Options

Now for the fun part: Adding word lists! Add as many or as few word lists as you want (1).

Reminder: for this software, you want the word lists to have a colon in between the word and the description. As you can see in the starting screen of the crossword module, you want your word lists formatted like this:

BookPublisherTools: Popular software company

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/h7dt7oEZy5/time%20saver%20word%20lists.jpg (time saver word lists)

You can set if the word lists can be merged or not (3). If you have themed word lists and want to create themed puzzles, you probably don't want to mix them. However, if the puzzles do not have a theme, merging them can create more unique puzzles, which is good too.

You can also choose if a word can be re-used (2). Using auto or repeat, the wordlists will slowly be used, and words cannot be reused. With repeat, they can be reused.

Puzzle Control Options

Time for batch creation! This is the fun part of the time saver. You've done your prep work, now you can select how many puzzles you want, what the sizes of the puzzles are, you can load in presets, et cetera.

Simply change the quantity(1), select the size you want(2), and click "add" (3) to add them to the list of puzzles the software has to make.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/c4YWdAVw57/adding%20a%20puzzle.jpg (adding a puzzle)

If you've made presets for criss cross crosswords in the past, you can load those in too!

You can select which word lists each batch pulls from, or if it doesn't really matter and they can pull from everything here too, and you can change the amount of words that can be in each puzzle. Simply change those settings after you've added them to the list.

Then finally, you just click "Create (TS)" to generate all the puzzles! Don't forget to make sure you have "use Time Saver to generate puzzles" (located at the top of the screen) selected.

https://malcolm-en-gb.s3.eu-west-1.amazonaws.com/instances/wuGqS3zSeN/resources/9HWj6wUWdq/timesaver%20lists.jpg (timesaver lists)

The preview window. Here you will always see one preview of a sudoku with the selected settings.
"What to Generate?". Depending on the sudoku modules you own, several options appear here. You can choose the size of the sudoku, from a size as small as 4x4, to the maximum of 25x25. You can select the variation. If you only own the standard sudoku licence, that's all you'll have, but above you can see a list of all the variations we have. You can also select the difficulty, anywhere between level 1 and level 7, and you can select the amount of sudokus that have to be generated.
The Styling options. You can select a font to use, the colour for the solution and the puzzle (as you'll usually print in black and white, both are on a grayscale as standard option), the canvas colours, line width and colour... basically everything you need to make a sudoku look unique to you.
The create button. Press here to generate the sudokus you have set up.

How to Limit the number of words in a Word Search puzzle

How Do I Install the Powerpoint Plugins?

How do I create shaped word search puzzles

How to use the Time Saver for Puzzle Maker Pro - Letterbox

Word Puzzle Output

How to use the Layout Options in Time Saver

How to create Acrostic puzzles with Puzzle Maker Pro - Acrostic Column

How to use the Time Saver for Puzzle Maker Pro - Crossword

Getting Started with Puzzle Maker Pro - Sudoku

How to create Word Search puzzles